Gefen EXT-HDMI1.3-442 Manuel utilisateur
Audio
Embedder
3GSDI
Release B6
User Manual
EXT-HDMI1.3-442
Switcher
for HDMI 1.3
4x2 Switcher for HDMI 1.3
Important Safety Instructions
ii
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this product near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8. Do not install or place this product near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prong are provided for
your safety. If the provided plug does not t into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specied by the manufacturer.
12. To reduce the risk of electric shock and/or damage to this product, never handle or
touch this unit or power cord if your hands are wet or damp. Do not expose this
product to rain or moisture.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualied service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not operate normally,
or has been dropped.
15. Batteries that may be included with this product and/or accessories should never be
exposed to open ame or excessive heat. Always dispose of used batteries
according to the instructions.
Warranty Information
Gefen warrants the equipment it manufactures to be free from defects in material and
workmanship.
If equipment fails because of such defects and Gefen is notied within two (2) years from
the date of shipment, Gefen will, at its option, repair or replace the equipment, provided
that the equipment has not been subjected to mechanical, electrical, or other abuse or
modications. Equipment that fails under conditions other than those covered will be
repaired at the current price of parts and labor in effect at the time of repair. Such repairs
are warranted for ninety (90) days from the day of reshipment to the Buyer.
This warranty is in lieu of all other warranties expressed or implied, including without
limitation, any implied warranty or merchantability or tness for any particular purpose, all of
which are expressly disclaimed.
1. Proof of sale may be required in order to claim warranty.
2. Customers outside the US are responsible for shipping charges to and from Gefen.
3. Copper cables are limited to a 30 day warranty and cables must be in their original
condition.
The information in this manual has been carefully checked and is believed to be accurate.
However, Gefen assumes no responsibility for any inaccuracies that may be contained
in this manual. In no event will Gefen be liable for direct, indirect, special, incidental, or
consequential damages resulting from any defect or omission in this manual, even if
advised of the possibility of such damages. The technical information contained herein
regarding the features and specications is subject to change without notice.
For the latest warranty coverage information, refer to the Warranty and Return Policy under
the Support section of the Gefen Web site at www.gefen.com.
PRODUCT REGISTRATION
Please register your product online by visiting the Register Product page under the
Support section of the Gefen Web site.
iii
4x2 Switcher for HDMI 1.3
iv
Gefen, LLC
c/o Customer Service
20600 Nordhoff St.
Chatsworth, CA 91311
Telephone: (818) 772-9100
(800) 545-6900
Fax: (818) 772-9120
Visit us on the Web: www.gefen.com
Technical Support Hours: 8:00 AM to 5:00 PM Monday - Friday, Pacic Time
4x2 Switcher for HDMI 1.3 is a trademark of Gefen, LLC.
Important Notice
Gefen, LLC reserves the right to make changes in the hardware, packaging, and any
accompanying documentation without prior written notice.
© 2014 Gefen, LLC. All Rights Reserved.
All trademarks are the property of their respective owners.
Contacting Gefen Technical Support
iv
4x2 Switcher for HDMI 1.3
vv
• By default, display information from the display connected to HDMI output port 1 is
sent back to the source. Therefore, other displays connected to the 4x2 Switcher for
HDMI 1.3 must be capable of accepting the timing, resolution, and audio format as
supported by the display that is connected to HDMI output port 1. It is recommended
that the display with the lowest native resolution be connected to HDMI output port
1. This is to ensure that a compatible video signal will be able to be displayed on all
connected monitors. There is a generic EDID programmed into the 4x2 Switcher for
HDMI 1.3 that can be used instead. See EDID Management (page 11)for more
information.
• When the 4x2 Switcher for HDMI 1.3 is power-cycled or reset, the Input Indicators will
briey ash, displaying the current IR channel setting. See Setting the Switcher IR
Channel (page 10)for more information.
Operating Notes
4x2 Switcher for HDMI 1.3
vi
Features
• Switch easily between any four HDMI / DVI sources
• Outputs are mirrored to two HDMI / DVI displays simultaneously
• Maintains sharp HDTV resolutions up to 1080p Full HD and 2K
• HDMI Features:
► 225 MHz (up to 12 bit YUV 444 supported @ 1080p)
►Deep Color
► Dolby® TrueHD and DTS-HD Master Audio™
► Lip-Sync
• 3DTV Pass-Through
• Color Space Conversion
• EDID Management for rapid integration of sources and display devices
• IR Remote Control Unit
• Mono-LOK™ Locking HDMI Connectors
• Supports the use of DVI sources and DVI displays with an HDMI-to-DVI converter
cable or adapter
• HDMI and HDCP compliant
Packing List
The 4x2 Switcher for HDMI 1.3 ships with the items listed below. If any of these items are
not present in the box when you rst open it, immediately contact your dealer or Gefen.
• 1 x 4x2 Switcher for HDMI 1.3
• 4 x 6 ft HDMI cables (M-M)
• 1 x IR Remote Control Unit
• 1 x 5V DC Power Supply
• 1 x Quick-Start Guide
Features and Packing List
®
1080P
4x2 Switcher for HDMI 1.3
3GSDI Audio Embedder
Table of Contents
viii
4x2 Switcher for HDMI 1.3
01 Getting Started
Unit Layout ............................................................................................................ 2
Front.............................................................................................................. 2
Back .............................................................................................................. 3
IR Remote Control Unit ......................................................................................... 4
Front.............................................................................................................. 4
Back .............................................................................................................. 5
Installing the Battery...................................................................................... 6
Setting the IR Channel .................................................................................. 6
Installation ............................................................................................................. 7
Connection Instructions................................................................................. 7
Sample Wiring Diagram ................................................................................ 7
02 Operating the 4x2 Switcher for HDMI 1.3
Setting the Switcher IR Channel ......................................................................... 10
EDID Management...............................................................................................11
Selecting the EDID Mode............................................................................ 11
Internal EDID............................................................................................... 12
External EDID ............................................................................................. 13
03 Appendix
Specications ...................................................................................................... 16
Autres manuels pour EXT-HDMI1.3-442
1
Table des matières
Autres manuels Gefen Changer
Gefen
Gefen HD-441A Manuel utilisateur
Gefen
Gefen GEF-UHD-89-HBT2 Manuel utilisateur
Gefen
Gefen EXT-DVI-EDIDP Manuel utilisateur
Gefen
Gefen 2x2 HDMI Switcher Manuel utilisateur
Gefen
Gefen HDSDI-441N Manuel utilisateur
Gefen
Gefen EXT-HD-EDIDPN Manuel utilisateur
Gefen
Gefen EXT-HDMI1.3-244 Manuel utilisateur
Gefen
Gefen 6x2 HDMI Manuel utilisateur
Gefen
Gefen DVI-422 Manuel utilisateur
Gefen
Gefen EXT-USB-400FON Manuel utilisateur
Gefen
Gefen EXT-DP-841 Manuel d'installation et d'exploitation
Gefen
Gefen 2X1 DVI KVM SWITCHER Manuel utilisateur
Gefen
Gefen 3x1 HDMI Switcher Manuel utilisateur
Gefen
Gefen SL Switcher Manuel utilisateur
Gefen
Gefen HD Digital Audio Switcher Manuel utilisateur
Gefen
Gefen EXT-HDMI1.3-244 Manuel utilisateur
Gefen
Gefen EXT-HDMI-241N Manuel utilisateur
Gefen
Gefen DIGAUD-241 Manuel utilisateur
Gefen
Gefen EXT-3GSDI-441 Manuel utilisateur
Gefen
Gefen Digital Audio Switcher Manuel utilisateur
