Gefen DVI-441N Manuel utilisateur
4x1 DVI Switcher
USER MANUAL
www.gefen.com
Technical Support:
Telephone (818) 772-9100
(800) 545-6900
Fax (818) 772-9120
Technical Support Hours:
8:00 AM to 5:00 PM Monday through Friday.
Write To:
Gefen Inc.
c/o Customer Service
20600 Nordhoff St
Chatsworth, CA 91311
www.gefen.com
Notice
Gefen Inc. reserves the right to make changes in the hardware, packaging and any
accompanying documentation without prior written notice.
4x1 DVI Switcher is a trademark of Gefen Inc.
© 2007 Gefen Inc., All Rights Reserved
ASKING FOR ASSISTANCE
TABLE OF CONTENTS
Introduction
Features
Panel Descriptions
Connecting and Operating the 4x1 DVI Switcher
RMT4-IR Installation
RS-232 Interface
Specifications
Warranty
1
2
3
4
5
6
7
8
Congratulations on your purchase of the 4x1 DVI Switcher. Your complete satisfaction is
very important to us.
Gefen’s line of DVI switches, extenders, and splitters are designed to make yourA/V
equipment use more comfortable, more productive and less expensive.
The 4x1 DVI Switcher allow access to multiple DVI devices, using a single DVI display
while the DVI extender product line can extend video up to 1640 feet (500 meters).
Gefen Inc. offers solutions for noise, space and security concerns, data center control,
information distribution, conference room presentation, school and corporate training
environments.
Our Commitment
Gefen will always offer the finest quality product at the best possible price. Included in
that price is a lifetime of support from a team of outstanding engineers.
The 4x1 DVI Switcher allows four DVI devices to be switched easily in to one DVI com-
patible monitor or projector. The 4x1 DVI Switcher can also be placed at the end of a
long DVI cable to regenerate the DVI signal.
INTRODUCTION
1
FEATURES
Features
• Switches easily between any four DVI sources
• Maintains 480i, 480p, 720p, 720i, and 1080i, 1080p resolutions
• Extends any DVI compliant device by regenerating the DVI signal
• Maintains highest DVI single link video resolution
• Supports DDWG standard for DVI compliant monitors
• Supports HDCP compliant devices
• Optional RMT-4 remote control
• DVI cables are used to connect the DVI inputs and 4x1 DVI Switcher output
• Installs in seconds
Includes:
(1) 4x1 DVI Switcher
(4) 6' DVI-D cables (m-m)
(1) 5V DC Power Supply
(1) RMT4-IR
2
PANEL DESCRIPTIONS
3
LED Source Indicator IR Eye Source Selector Buttons LED Power Indicator
DVI Input 1 DVI Input 2 DVI Input 3 DVI Input 4 DVI Output RS-232 Input IR Extender
5V DC Input
CONNECTING AND OPERATING THE 4x1 DVI SWITCHER
How to Connect the 4x1 DVI Switcher to your devices
1 Connect the supplied DVI cables from the DVI sources into the DVI Switcher Input.
2Connect the cable from your display (monitor or projector) into the DVI Out of the
4x1 DVI Switcher.
How to Operate the 4x1 DVI Switcher
Use the RMT4-IR remote control port to remotely toggle between sources.
Operation Notes
The 4x1 DVI Switcher may also be powered from the input. The DVI source supplies 5v to
the switcher via pin-14 on the DVI cable.
The contact closure port is wired using a shielded CAT5 cable. Pins 1-4 to the shield
cause the unit to switch to inputs 1-4. Pins 5-8 are feedback letting you know what has
been selected.
4
RMT4-IR INSTALLATION
5
1. Remove battery cover from the back of the RMT4-IR remote.
2. Verify that dip switches 1 & 2 are in the down (OFF) position.
3. Insert the battery, hold the battery so that you can see the positive side facing up. The
side that is not marked must be facing down.
4. Test the RMT4-IR remote by pressing ONLY one button at a time. The indicator light
on the remote will flash once each time you press a button. WARNING: Do not press
multiple buttons simultaneously and do NOT press buttons rapidly. These actions will
cause the remote to reset and steps 1-4 will have to be repeated.
Note: The RMT4-IR ships with two batteries. One battery is required for operation, the
second battery is complimentary.
How to Operate the IR Extender Eye (optional)
Plug in the IR extender eye to the extender port on the back of the switcher. As soon as
the IR extender eye is plugged in you can extend your IR signal. The IR extender eye
does not come included in the package.
RS-232 INTERFACE
6
Binary Table
ASCII Corresponding
RMT16-IR
Button
Binary
1 1 0011 0001
2 2 0011 0010
3 3 0011 0011
4 4 0011 0100
RS232 Settings
Bits per second ...................................................................................................... 19200
Data bits ......................................................................................................................... 8
Parity ....................................................................................................................... None
Stop bits ..........................................................................................................................1
Flow Control ............................................................................................................ None
SPECIFICATIONS
7
Video Amplifier Bandwidth ................................................................................. 1.65 GHz
Input Video Signal ......................................................................................... 1.2 volts p-p
Input DDC Signal .................................................................................... 5 volts p-p (TTL)
Single Link Range .............................................................................. 1080p/1920 x 1200
DVI Input/Output Connector Type .............................. DVI-I (29 pin) female (Digital Only)
Remote Control Port ............................................................... RS232 female, mini-stereo
Power Consumption ................................................................................ 10 Watts (max.)
Power Supply ......................................................................................................... 5V DC
Dimensions ................................................................................. 13.25”W x 1”H x 2.75”D
Shipping Weight ....................................................................................................... 6 Lbs
Table des matières
Autres manuels Gefen Changer
Gefen
Gefen GTV-AUDDEC-N Manuel utilisateur
Gefen
Gefen DVIKVM-241SL Manuel utilisateur
Gefen
Gefen HDMI-441 Manuel utilisateur
Gefen
Gefen HDMI1.3-441 Manuel utilisateur
Gefen
Gefen GTV-MFS Manuel utilisateur
Gefen
Gefen EXT-3GSDI-441 Manuel utilisateur
Gefen
Gefen 4x2 HD-SDI Manuel utilisateur
Gefen
Gefen ADC-241 Manuel utilisateur
Gefen
Gefen EXT-DVIKVM-441DL Manuel utilisateur
Gefen
Gefen GTV-AUDDEC-N Manuel utilisateur
Gefen
Gefen EXT-DP-422DL Manuel utilisateur
Gefen
Gefen EXT-HDMI1.3-341 Manuel utilisateur
Gefen
Gefen HD-441A Manuel utilisateur
Gefen
Gefen USB-241 Manuel utilisateur
Gefen
Gefen EXT-HDMI1.3-441 Manuel utilisateur
Gefen
Gefen EXT-DVIKVM-441DL Manuel utilisateur
Gefen
Gefen GTB-HD4K2K-442-BLK Manuel utilisateur
Gefen
Gefen 8x1 HDMI Switcher Manuel utilisateur
Gefen
Gefen EXT-VGA-142N Manuel utilisateur
Gefen
Gefen EXT-DVI-422DL Manuel utilisateur
