GE RM24973 Manuel utilisateur

Universal

Remote Control

RM24973

INSTRUCTION

MANUAL

Thank you for purchasing the GE Universal

Remote Control. This product is designed

to provide years of service operating a wide

variety of video and audio equipment.

Please retain this guide for future reference.

Table of Contents

Battery Installation . . . . . . . . . . . . . . . . . . . . 1

Button Description . . . . . . . . . . . . . . . . . . 2-4

Programming Your Audio &

Video Devices . . . . . . . . . . . . . . . . . . . . . . . 5

Programming the Auxillary

(AUX) Button. . . . . . . . . . . . . . . . . . . . . . . . 6

Programming with Code Search . . . . . . . . 7

Menu Function . . . . . . . . . . . . . . . . . . . . . . . 8

Learning Function. . . . . . . . . . . . . . . . . . . . . 9

Clearing a Learned Function. . . . . . . . . . . 10

Identifying Codes from your

Universal Remote . . . . . . . . . . . . . . . . . . . 11

Trouble Shooting . . . . . . . . . . . . . . . . . . . . . 12

Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Lost Codes? . . . . . . . . . . . . . . . . . . . . . . . . . 13

This Universal Remote Control is already

programmed for most GE, RCA and ProScan

TVs, VCRs, Satellite Systems, DVD Players,

and Audio/Video Receivers.

NOTE: For users of GE, RCA and ProScan

Satellite Products, older Satellite models

require that the DISPLAY Button on this

remote be used to make program selections.

Use the SELECT Button for making program

selections on newer GE, RCA and ProScan

Satellite Receivers.

Battery Installation

Your Universal Remote Control requires 2

AAA alkaline batteries.

To install the batteries:

1. Turn the remote over and push down on

the cover and slide it off.

2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Insert the batteries, matching the batteries to

the (+) mark inside the battery case.

3. Slide the battery cover back into place.

NOTE: Programmed codes will remain in

memory even after battery life is gone and

also during battery replacement.

Button Description

INDICATOR LIGHT

The Indicator Light flashes to show that

the remote is working. Also used in set-up

process.

ON•OFF

The ON•OFF button operates the same as

your original remote.

NOTE: Some GE, RCA and ProScan models

require you to press the device button to turn

the device on and the ON•OFF button to

turn the device off.

LEARN

The Learn button allows you to “record” and

“delete” “learned” functions from the origi-

nal or other remote controls.

TV, DVD, SAT/CBL, VCR, AUX

Used to select the device you want to con-

trol.

VOL & CH

The VOL (Volume) and CH (Channel) but-

tons increase or decrease the channel num-

bers or volume.THE CH buttons also control

the SKIP functions for DVD and CD Player.

Press SKIP to advance forward to the next

chapter/track. Press Skip to move back to

previous chapters/tracks.

MUTE

Mutes volume on the TV.

PREV CH

Allows you to go to the previous channel you

selected. Operates the same as Last Channel,

Go Back or Recall on your original remote.

SETUP

Used to program the remote or to search

through codes.

GUIDE

Brings up the on-screen TV program guide if

your TV has that feature.

DISP

Shows the date, time and channel if your TV

or VCR has that feature.

NAVIGATION BUTTONS & OK

Used to move through on-screen menuing

and guides. With some satellite receiver

models the DISP button should be used to

select the highlighted item. Use the naviga-

tion buttons to move the highlighted choice

up, down, left or right.

Brings up the Main Menu. If you are already

in the menu system, press SELECT to select a

highlighted choice. Use the arrows buttons to

move through the Menu Selection.

CLEAR

Removes the on screen display to return to

normal viewing.

0-9

The number buttons operates the same as on

your original remote, and are used for enter-

ing device codes.

ENTER

The ENTER button

is used to complete

channel selection for

some brands of TV. It

is also used to com-

plete the code search

process.

TV•VCR

The TV/VCR button

operates the TV/

VCR function of

your TV. REW, PLAY,

FORWARD, REC,

STOP, PAUSE

These buttons oper-

ate the same as on

your original VCR

or remote. You must

press the REC but-

ton twice to begin

recording. The REW

and FF buttons also

control the Reverse

and Forward func-

tions for DVD and

CD Player. PIP,

SWAP & INPUT PIP

(Picture-in-Picture) and SWAP operate

your television’s Picture-in-Picture features.

INPUT selects the video input of your TV if

equipped with this feature.

Button Description For Audio

Operation

Press AUDIO device button to enable the

AUDIO MODE Audio functions indicated by

red printing.

LEVEL+/LEVEL-

Sets the level of the speakers during test tone

mode.

DSP ON•OFF

Enables the receiver’s Digital Sound

Processing Mode.

DSP MODE

When the DSP mode is enabled, pressing this

button allows the user to toggle through the

various DSP modes.

CD, TAPE, TUNER, TV, VIDEO

Used to directly select the device you want to

control. (Works in AUDIO mode).

AM•FM

The AM•FM button allows you to select the

AM•FM band on your audio receiver.

FUNCTION

Toggles the different audio input devices.

The number buttons also select the input

devices labeled below the buttons when in

AUDIO mode. function is also used to set

“learned” functions.

DELAY-, ON, DELAY+

Increases or decreases the delay between

the surround and main speakers when the

receiver is in the surround sound mode.

ON•OFF, SURR. MODE

Toggles the surround modes on and off.

SURR MODE toggles through the receiver’s

various surround sound mode settings.

FRONT, CENTER, REAR, TEST

Adjust the levels of the front, center, and rear

speakers respectively. The test tone must be

enabled first by pressing the TEST button.

PRESET

Used to operate preset channels while in the

AUDIO mode.

Programming Your Audio & Video Devices

Most GE, RCA and ProScan devices will not

require programming. Check to see if your

device responds to the remote before you

begin programming.

1. Manually turn on the device to be pro-

grammed. Find the three digit code for

your device in the code list.

2. Press and hold the

SETUP button until the

INDICATOR LIGHT

lights, then release the

SETUP button.

3. Press and release the

device button. The

INDICATOR LIGHT

will blink then remain

lit.

4. Enter the code using the

Number Buttons. After

your code is entered, the

INDICATOR LIGHT will

turn off. If the code is not

valid, the INDICATOR

LIGHT will blink. Check

the code list and repeat

process.

5. Aim the remote at your

device and press the

ON•OFF button. Your

device should turn off.

6. With your device

on, press CH+

(CHANNEL UP). If the

TV responds, no fur-

ther programming is

required.

NOTE: If your device does not respond,

try all the codes for your brand. If the

codes do not work, or your brand is not

listed, try the Code

Search method on

Page 7.

7. Enter your device

code here for easy

reference.

TV CODE LIST

Programming the Auxillary

(AUX) Button

With the AUX button, you can assign a

second TV, DVD, CD player, VCR, Satellite

System, or Cable Box to it.

1. Manually turn on the device you wish to

control. Find the three digit code for the

device you wish to program in the code

list.

2. Press and hold the

SETUP button until the

INDICATOR LIGHT

lights, then release the

SETUP button.

3. Press and release the

AUX button (The

INDICATOR LIGHT will

blink then remain lit.)

4. Enter the code using the

Number Buttons. After

your code is entered, the

INDICATOR LIGHT will

turn off. If the code is not

valid, the INDICATOR

LIGHT will blink. Check

the code list and repeat

process.

5. Aim the remote at the

device you wish to

control and press the

ON•OFF button. The

device should turn off.

6. With your device on,

press CH+ (CHANNEL

UP) button. If the device

responds, no further pro-

gramming is required.

NOTE: If your device does

not respond, try all the codes for your brand.

If the codes do not work, or your brand is

not listed, try the Code Search method on

page 7.

7. Enter your code and

the type of device you

programmed here for

easy reference.

SAT

Programming With Code Search

If your TV, VCR, DVD player, DBS Satellite

System, Cable Box or CD player does not

respond after you have tried all the codes for

your brand, or if your brand is not listed, try

searching your code by following the steps

below:

1. Manually turn on the device you wish to

program.

2. Press and hold the

SETUP until the

INDICATOR LIGHT

lights, then release

SETUP.

3. Press and release the

device button for

the device you are

programming. The

INDICATOR LIGHT

will blink once, then

remain lit.

NOTE: For AUX program-

ming carry out program-

ming procedure on page

6 for the device you are

assigning to AUX prior to

starting a Code Search.

4. Press and release

ON•OFF until your

device turns off.

5. When your device turns

off, press ENTER, the

INDICATOR LIGHT will

turn off.

Identifying Codes From

Menu Function

The Menu Function is used to make chang-

es in the selected settings such as setting

color, channels, timer, etc. The MENU but-

ton invokes TV, DVD and SAT modes. Each

menu will vary from brand to brand.

Entering the Menu Mode:

1. Push the device button

on the remote for the

desired menu.

2. Push the MENU button.

This allows you to view

the menu of the device

chosen. The menu

should now be visible

on your television.

3. While in Menu Mode,

these buttons will

function as follows:

Navigation LEFT/

RIGHT buttons will

operate as cursor left or

right. Navigation UP/

DOWN buttons will

operate as cursor up or

down. MENU button

applies to the highlight-

ed menu items.

4. To select a menu option,

push the OK button.

Not all functions in com-

petitive models and brands of televisions

may be fully supported.

EXITING THE MENU MODE

To exit the Menu Mode and clear the screen,

push the device button you have chosen on

the remote.

Note: The remote will automatically exit the

Menu Mode after ten (10) seconds of inactiv-

ity with no buttons being pushed.

Learning Function

The learning feature is used as a supplement to the stan-

dard preprogrammed library. the standar code library

provides most of the functions needed,, but you can add

additional functions from your original remote. Note:

No functions may be stored under the LEARN, SLEEP,

SETUP, MENU or any of the device buttons.

1. Place the remote control unit and the original remote

control unit so the

bottom end of the

24973 remote (infrared

receiver) faces the top

end (infrared trans-

mitter) of your orginal

remote. They should

not be any more than

2 inches apart.

2. Press and hold the SETUP but-

ton until the INDICATOR LIGHT

lights, then release the SETUP but-

ton.

3. Press and release the desired

Mode button (TV, VCR, DVD,

etc. . . .) The INDICATOR LIGHT

will blink off once button press is

accepted.

4. Press and release the LEARN

button.

5. Press and release the button to

be learned on this remote. Any

button (except, LEARN, SETUP,

MENU, OR device buttons) can be

used to store learned functions.

6. Press and hold the button on

the original remote control until

INDICATOR LIGHT on this

remote blinks once. Once the

INDICATOR LIGHT blinks

you may continue with the next

function. If there is an error in

learning the new function the

INDICATOR LIGHT will flash

for 3 seconds but remain in the

learning mode. Return to step 5 if

the INDICATOR LIGHT flashed.

NOTE: Hold the function key on your

original remote for at least 3 seconds

for the command to be successfully

learned.

7. Repeat steps 5 and 6 to store more

functions.

8. Once the selected functions are

stored press the SETUP button and

the remote will return to original

operation mode.

2 inches

BLINK

Table des matières

Langues :

Autres manuels GE Télécommande universelle

Manuels Télécommande universelle populaires d'autres marques

Pronto

Pronto Peel Manuel utilisateur

Radio Shack

Radio Shack Wireless Remote Control System Manuel utilisateur

AUVIO

AUVIO Universal Home Theater Remote Manuel utilisateur

Philips

Philips Icon SRU4106 Manuel utilisateur

THOMSON

THOMSON ROC4309 Manuel utilisateur

Philips

Philips pm625S Manuel utilisateur

RCA

RCA RCU600WMS - Universal Remote Control Manuel utilisateur

Blackweb

Blackweb BWB17AV002 Manuel utilisateur

Marmitek

Marmitek DoorGuard 300 Manuel utilisateur

Chunghop

Chunghop RM-L618 Manuel utilisateur

Anderic

Anderic KTN828 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. Touch Screen Remote Control Manuel utilisateur

Medion

Medion E74023 Manuel utilisateur

intensity

intensity RM02A Manuel utilisateur

Sky

Sky MY Manuel utilisateur

RCA

RCA RCU600M - Universal Remote Control Manuel utilisateur

Savant

Savant SUR-0500 Guide de référence rapide

GDI

GDI GDI-WT2K Manuel utilisateur