GE HO97685 Manuel utilisateur

Universal Remote

with PC Control

HO97685

User’s Manual

www.jascoproducts.com

FCC Caution

THIS DEVICE COMPLIES WITH PART 15

OF THE FCC RULES.

OPERATION IS SUBJECT TO THE FOL-

LOWING TWO CONDITIONS:

(1) THIS DEVICE MAY NOT CAUSE

HARMFUL INTERFERENCE, AND

(2) THIS DEVICE MUST ACCEPT ANY

INTERFERENCE RECEIVED, INCLUD-

ING INTERFERENCE THAT MAY

CAUSE UNDESIRED OPERATION.

This equipment generates and uses

radio frequency energy, and if not

installed and used properly, that is, in

strict accordance with the manufactur-

ers instructions, it may cause interfer-

ence to radio and television reception.

It has been type tested and found to

comply with the limits for remote con-

trol devices in accordance with the

specifications in Sub-Parts B and C of

Part 15 of FCC Rules, which are

designed to provide reasonable protec-

tion against such interference in a resi-

dential installation. However, there is

no guarantee that interference will not

occur in a particular installation. If this

equipment does cause interference to

radio or television reception, which can

be determined by unplugging the equip-

ment, try to correct the interference by

one or more of the following measures.

•Reorient the antenna of the radio/TV

experiencing the interference.

•Relocate the product with respect to

the radio/TV.

•Move the product away from the

radio/TV.

•Plug the product into an outlet on a

different electrical circuit from the

radio/TV experiencing the interfer-

ence.

•If necessary, consult your local

Dealer for additional suggestions.

NOTE: Modifications to this product will

void the user’s authority to operate this

product.

Contents

Introduction . . . . . . . . . . . . . . . . . . . .1

Button Descriptions . . . . . . . . . . . . . . .2

Setting up the Remote . . . . . . . . . . . .4

Setting up the Software . . . . . . . . . . .4

Setting up the Receiver . . . . . . . . . . .5

Using the PC Controls . . . . . . . . . . . . .5

Setting up for TV, DVD, VCR, Cable, or

Satellite . . . . . . . . . . . . . . . . . . . . . . . . .7

Searching For Codes . . . . . . . . . . . . . .8

Identifying Codes found using

the Search Procedure . . . . . . . . . . .9

Troubleshooting . . . . . . . . . . . . . . . .10

IMPORTANT NOTE-PC Code . . . . . .11

Warranty . . . . . . . . . . . . . . . . . . . . . .11

Other Products . . . . . . . . . . . . . . . . . .12

Introduction

Congratulations on your purchase of

the GE branded HO97685 remote and

receiver.

This remote lets you play MP3 files

DVDs and CDs in your PC. Now you

don’t have to be sitting at your PC to

play your MP3 files. Just a click of a

button on the remote from across the

room does the trick!

The HO97685 remote is also a Universal

Remote so you can use it to control

your TV, DVD, cable box, etc.

It’s easy to set up. Within minutes, you

can be using your Remote to play your

favorite MP3 files and relax to your

favorite music.

Here are just some of the things you

can do with your HO97685 Remote...

•Play your favorite MP3 files on your

PC without having to be in the same

room.

•Play DVDs on your PC from the com-

fort of your armchair.

•Play CDs in your PC at the touch of a

button.

•Control all your A/V equipment, TVs,

VCRs, cable boxes, etc.

Use this manual to become familiar

with your HO97685 Remote....

First, it explains how to set up your

HO97685 remote to play MP3 files,

DVDs, music CDs or control your TV

tuner on your PC.

Next, it shows you how to set up the

remote to control your TV, cable box,

etc.

Lastly, the manual shows you how you

can expand your system with some of

the additional GE branded products you

can buy.

Button Descriptions

Indicator Light

The indicator light flashes when you

press any button.

Power

Works the same as your original

remote.

TV, DVD, VCR, CBL/SAT, PC

Used to select the device to control. PC

lets you select an MP3, DVD, CD or TV

tuner on your PC, when used with the

wireless receiver and PC software.

Setup

Used for programming the remote.

Last

Selects the last channel viewed on

your TV, VCR, or Cable Box.

Volume +/-

Works like your original remote. Also,

after you first press PC followed by but-

ton 1, 2, or 3, VOL+ increases volume

and VOL- decreases volume on your

PC’s MP3, DVD, CD player or TV tuner,

when used with the wireless receiver

and PC software.

Channel +/-

Works like your original remote. Skips

to the next or previous track in PC

mode depending on which application

you use.

Mute

Works the same as your original

remote. Also, after you first press PC

followed by button 1, 2, or 3 mutes the

volume in your PC’s MP3, DVD, CD

player, or TV tuner when used with the

wireless receiver and PC software.

0-9

Used as with your original remote.

Also, after you first press PC, buttons 1,

2, and 3 perform as function buttons to

select MP3, DVD/CD or TV tuner

respectively when used with the wire-

less receiver and PC software.

Enter

Same as your original remote.

A-B

Toggles between TV and Video Mode.

Access the Menu function of the

device you are controlling (if available).

Exit

Used to exit Menu functions.

Navigation Arrows

Used to navigate and adjust menu

items of the device you are controlling.

Selects menu items of the device you

are controlling.

PLAY, REW, FF, STOP, PAUSE, REC

Work the same as on your original

remote. You must press the REC button

twice to begin recording. Also, after

you first press PC followed by button 1,

2, or 3, controls your PC’s MP3, DVD

player, CD player, or TV tuner when

used with the wireless receiver and PC

software.

A, B, C, D

Used for extra functions in certain

modes.

Setting up the Remote

1.Push the tab and lift off the

battery cover.

2.Fit four AAA batteries, taking

care to match the + and -

marks in the compartment.

Battery Saver

Your remote automatically “times-out”

if the keys are pressed for more than

30 seconds. This will save your batter-

ies should your remote get stuck in a

place where the keys remain

depressed (e.g., between the sofa

cushions).

Code Saver (Important)

You have up to 90 seconds to change

the batteries in your remote without

losing codes you have programmed.

However, do not press any buttons until

batteries are installed in the remote. If

buttons are pressed without batteries

in the remote, all codes will be lost.

Setting up the software

NOTE: BOOM™ software lets you con-

trol an MP3 player application from the

remote. It works with WinAmp™,

RealOne™, MusicMatch®, Windows

Media® Player, etc., which you must

previously have installed. It also con-

trols a DVD player, CD player, or TV

tuner on your PC.

1. Download the BOOM software. Point

your web browser (Explorer,

Netscape, etc.) to:

www.jascoproducts.com/boom.html

Click on “Download Boom Software

Now.” Select “Save” to download to

your computer. You will then be

asked where you want to save the

document. Select Desktop, or other

location you will remember and then

click “Save.”

2. Close your web browser, then launch

the installer by double clicking on

“boom” in the location you choose to

save it.

3. It is recommended that you install

into the default “Program Files” loca-

tion and that you choose to run Boom

at start-up. Restart your computer to

complete set up.

4. Open Boom. If you choose to have

Boom run at start-up, click on the

green “Boom” icon in the system tray

in the lower right corner of your

screen. If you choose not to open

Boom at start-up, open by selecting

Boom from the programs section in

your start menu.

5. Right-click on the BOOM window,

select “Players”, then choose your

favorite applications for each of the

modes (i.e. MP3, CD/DVD, and TV).

6. Click the OK button to save the

choices.

Setting up the Receiver

You must install BOOM Software before

connecting the receiver to your PC.

Plug the cord on the receiver into the

USB port on your PC. Locate the receiv-

er as far away from your PC and your

monitor as its cord allows. The red LED

power indicator on the receiver should

be on.

Using the PC Remote

To use the PC Remote features, Boom

must be running. If you opted not to run

Boom at start up when you installed

Boom, you will need to open Boom from

the “Programs” section of the “Start

Menu.”

To launch the application you have

chosen:

1. Press the PC button.

2. Select the appropriate mode (MP3,

DVD/CD or TV) by pressing 1, 2, or 3.

The Media shown in the Boom win-

dow changes to MP3, DVD/CD, or TV

depending on which button you

pressed.

3. Press the Power button to launch the

application you have chosen.

You can press Play, Stop, FF, Rew,

Pause, Mute, Vol Up, Vol Down, etc.,

on the remote and it operates your on-

screen MP3 player, PC-DVD player, PC-

CD player, or PC-TV Player, just as if

you were clicking the buttons on your

monitor screen. Note: buttons work dif-

ferently depending on which applica-

tion you are attempting to control with

the remote. For example, in Windows®

Media Player “Chan +” skips to next

track and “Chan -” skips to previous

track.

In addition to letting you control an

MP3 player installed in your PC, the

BOOM program also lets you control a

DVD, CD player, or TV tuner installed on

your PC.

Boom automatically recognizes media

applications that are installed on your

computer and displays them as options

in the “Select Players” menu. However,

if your preferred media application is

not shown, you can configure it as a

custom application by right clicking on

the Boom window, selecting “cus-

tomize”, assigning your application a

name, and specifying the path to locate

the application on your PC.

For more information on using the

remote and Boom with your PC, right

click on Boom and select “Help.”

The HO97685 Remote is also a

Universal Remote so you can use it to

control a TV, DVD, VCR, cables box,

etc. To do this see the following sec-

tion.

Setting up for TV, VCR, Cable , or Satellite

1.Turn on the device you want to con-

trol (TV, VCR, cable box, etc.).

2.Press and hold SETUP until the LED

indicator lights steadily. Release the

SETUP button.

3.Press and release mode button for

the device you want to control (TV,

DVD, VCR, Cable or Satellite). The

LED blinks once. (See notes on next

page).

4.Enter the 3 digit Code from the Library

Code Table (separate sheet). The LED

turns off after the last digit entered.

5.Point the remote at the device and

press the POWER button. Your device

should turn off.

6.Turn your device on and press

CHAN+. If the device responds, setup

is complete.

Table des matières

Langues :

Manuels Télécommande universelle populaires d'autres marques

Pronto

Pronto Peel Manuel utilisateur

Radio Shack

Radio Shack Wireless Remote Control System Manuel utilisateur

AUVIO

AUVIO Universal Home Theater Remote Manuel utilisateur

Philips

Philips Icon SRU4106 Manuel utilisateur

THOMSON

THOMSON ROC4309 Manuel utilisateur

Philips

Philips pm625S Manuel utilisateur

RCA

RCA RCU600WMS - Universal Remote Control Manuel utilisateur

Blackweb

Blackweb BWB17AV002 Manuel utilisateur

Marmitek

Marmitek DoorGuard 300 Manuel utilisateur

Chunghop

Chunghop RM-L618 Manuel utilisateur

Anderic

Anderic KTN828 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. Touch Screen Remote Control Manuel utilisateur

Medion

Medion E74023 Manuel utilisateur

intensity

intensity RM02A Manuel utilisateur

Sky

Sky MY Manuel utilisateur

RCA

RCA RCU600M - Universal Remote Control Manuel utilisateur

Savant

Savant SUR-0500 Guide de référence rapide

GDI

GDI GDI-WT2K Manuel utilisateur