GE SIMON XT Manuel utilisateur

Simon XT System Manual

https://alpha.adt.com/help/64[11/12/2018 9:41:49 PM]

Simon XT System Manual

« Help Center

System

Overview

Arm & Disarm

the System

Panic Alarms Trouble

Conditions

User Access

Codes

System Testing Other System

Information

System Overview

Overview

Your security system is made up of a control panel, one or more keypads and various sensors and

detectors. The control panel will be mounted out of the way in a utility closet or in a basement.

All the keypads have an audible indicator and command entry keys. The LED keypads have a group of

zone and system status lights. The LCD keypad has an alphanumeric liquid crystal display (LCD). The

keypad is used to send commands to the system and to display the current system status. The keypad(s)

will be mounted in a convenient location inside the protected premises close to the entry/exit door(s).

The security system has several zones of area protection and each of these zones will be connected to

one or more sensors (motion detectors, glassbreak detectors, door contacts, etc.). A sensor in alarm will

Select

Simon XT System Manual

https://alpha.adt.com/help/64[11/12/2018 9:41:49 PM]

be indicated by the corresponding zone lights flashing on a LED keypad or by written messages on the

LCD keypad.

General System Overview

The Simon XT represents the latest in home and business security protection technology providing ADT

customers with:

Burglary, emergency, and fire* protection

At least one touchpad to control operations and display system status

Sensors for perimeter and interior burglary protection

Smoke or combustion detectors* for early fire warning

Display of zones triggered during alarm

Displayed and spoken messages

Multiple partition arming/disarming

System scheduling

Remote control

The Simon XT is designed to be as maintenance free as possible, however we suggest that you still test

your system once a month and after any alarm occurrences.

Treat the system as you would any other electrical equipment; do not slam protected doors or windows,

keep dust from accumulating on the touchpad and sensors, and do not spray water or any liquid on the

units.

*Your system may or may not be set up for fire protection.

Arm & Disarm the System

Arming

Arming Doors and Windows

To arm doors and windows:

1. Ensure all doors and windows are closed.

2. Press [DOORS] + [WINDOWS] + [security code] when the panel displays “enter code”.

3. The panel will display “Doors + Windows”, the [door] + [window] button will light up, and the system

will speak “Door and windows on”.

4. The panel will begin an ‘exit delay’ and will sound the exit beep until the exit delay expires.

Arming Doors, Windows and Motion Sensors

To arm doors, windows and motion sensors:

Simon XT System Manual

https://alpha.adt.com/help/64[11/12/2018 9:41:49 PM]

1. Press [DOORS] + [WINDOWS] + [security code] when the panel displays “enter code”.

2. While the panel is in the process of arming, press [MOTIONS].

3. The panel displays “Doors + Windows & Motions”, the [DOOR] + [WINDOW] and [MOTION] button

will light up, and the system will speak “Doors and windows on, motions on”.

4. The panel will begin an "exit delay" and beep until the exit delay expires.

Disarming

To disarm:

1. Press [DISARM], then enter your [code] when the panel displays ‘enter code”.

2. The panel displays DISARM, pees once and speaks “disarmed”

Subdisarm

To subdisarm:

1. Enter the [master code] while the system is disarmed.

2. The panel will display “Subdisarmed”, the DISARM button will blink, and the system will speak

“subdisarmed” and beep once.

EXIT/ENTRY DELAY

Your Simon XT provides a delay after entering or exiting your home before the system is alarmed.

Exit Delay

The exit delay is the amount of time the system gives you to exit the home before the system is armed.

When the user arms the system, an exit delay starts. During the delay the user can vacate the premises

through a delayed response door without causing an alarm.

Silent Exit

The silent exit feature silences the beeps accompanying the exit delay. Press SILENT after you arm the

system to silence the beeps. NOTE: enabling the silent exit doubles the exit delay time.

Entry Delay

The entry delay is the amount of time a system gives you to disarm the system before sound the alarm.

This feature must be programmed by the installer. Some active sensors cause immediate alarms when

tripped. Other sensors, if enrolled in a delayed response group, start an entry delay that lets you enter

the premises and disarm the system. If the system has not been disarmed by the end of the entry delay,

the alarm occurs.

Simon XT System Manual

https://alpha.adt.com/help/64[11/12/2018 9:41:49 PM]

No Delay

This feature must be programmed by the installer. IF the system was armed with the No Delay feature

activated, there will be no entry delay and the alarm will occur immediately.

Protest During Arming

The system may protest an arming level change if certain abnormal conditions exist. If a sensor that is

active in the requested arming level is open, the system sounds protest beeps and automatically

bypasses the open sensor (depending on system configurations).

Quick Exit

Allows for a quick exit when one wants to briefly leave the premises (i.e., grab the newspaper) without

sounding the alarm. This feature must be programmed by the installer.

Bypassing Sensors

Bypassing a sensor allows you to open a protected door/sensor when the system is armed. For example,

if you would like for your doors and windows to be armed, but would like the option of opening up a

kitchen window without triggering the alarm, you can bypass that window only.

To bypass sensors:

1. Press [BYPASS] and enter the [master code].

2. Scroll up/down to find the desired sensor (e.g., Sn 1 Front Door).

3. Press [ENTER] to bypass the sensor.

4. When the sensor is bypassed, the panel will display “bypassed” on the second line.

To unbypass:

1. Press [BYPASS] and enter the [master code].

2. Scroll up/down and find the desired sensor to be unbypassed.

3. Press [ENTER] to unbypass (inactivate bypass) the sensor.

4. The panel will remove the word “bypassed” from the second line of the display.

Chimes

This feature allows you to be notified when anyone enters or exits your home by signaling a chime when

a protected area/sensor is opened while the system is disarmed. A solid bell icon will appear in the

display when Chime is enabled.

To enable or disable the chime feature:

Simon XT System Manual

https://alpha.adt.com/help/64[11/12/2018 9:41:49 PM]

1. Scroll up/down until the display shows “Chime.”

2. Press [ENTER], the current setting will flash.

3. Scroll up/down to choose Chime On/Off.

4. Press [ENTER] at the desired setting.

5. Press [STATUS] to exit the menu.

Door Chime (Entry/Exit Beeps)

To turn the door chime function on or off, press and hold the [CHIME] key for 2 seconds or press [*][4].

Panic Alarms

Emergency Keys

Your system provides a series of alarms that indicate an usual occurrence. When an alarm is active, the

panel displays ALARM ALARM ALARM PRESS STATUS.

Alarms are canceled by entering the valid master user code. This will disarm the system.

Police

Press and hold the [POLICE] button for two seconds (or press twice quickly) to call the central monitoring

station and notify them of a nonmedical call for help.

Emergency

Press and hold the [EMERGENCY] button for two seconds (or press twice quickly) to call the central

monitoring station and notify them of a nonmedical call for help.

Fire

Press and hold the [FIRE] button for two seconds (or press twice quickly) to call the central monitoring

station and notify them of a nonmedical call for help.

Duress

Please refer to the Duress Code section below.

Piezo Beeps

Your panel has two built in sound sources; a piezo siren and a speaker. The piezo siren makes alarm

beeps and status beeps. Fire and intrusion alarm beeps are always played at a high volume, while status

beeps (i.e., chimes, exit beeps, etc.) have adjustable volume.

This option determines whether or not the panel sounds alarm beeps.

Simon XT System Manual

https://alpha.adt.com/help/64[11/12/2018 9:41:49 PM]

To program piezo beeps:

1. Enter the SYSTEM PROGRAMMING menu.

2. Scroll up/down to SIREN OPTIONS, then press [ENTER].

3. Scroll up/down to PANEL PIEZO ALRM, then press [ENTER].

4. The current value of this option now flashes on/off.

5. Scroll up/down to the desired value, then press [ENTER].

6. Press [STATUS] repeatedly to exit.

Trouble Conditions

Your security system is able to automatically test itself for power failures, low batteries, nonworking

sensors, and communication troubles with the central monitoring station. When your security system

detects a trouble condition, six rapid beeps will sound every minute for four hours until the trouble

condition is corrected.

To silence trouble beeps, press [STATUS] or arm/disarm the system.

For a complete list of Trouble Conditions, please refer to the Simon XT Troubleshooting page.

User Access Codes

Access Code Programming

Your Simon XT allows you to program certain options, such as individual access codes, panel alert beeps,

timers, light control, system test, etc.

Programming user access codes uses the same program format as any other programming feature. For

all programming, enter the system menu by pressing [ENTER]. Scroll up and down until the desired menu

is displayed and press [ENTER]. Reach submenus by pressing [ENTER] again. You can exit a menu by

pressing [STATUS]. The panel will automatically exit you from the system menu after a period of inactivity.

Authority Levels

The Simon XT provides a system of codes to be entered when a certain level of authority is required to

perform an action. These codes allow you to activate system options, customize panel operations, and

generate a silent alarm. Note: any combination of 40 or more key presses (such as fourteen invalid three-

digit codes) will cause a system access alarm. The alarm will lock all touchpads for 90 seconds.

Code Description

Master The master code is the main code used for panel operations. The default code will be 123,

Simon XT System Manual

https://alpha.adt.com/help/64[11/12/2018 9:41:49 PM]

code 1234, 12345, or 123456.

User

codes 1

through

These eight codes are supplemental user codes. These codes can be used for panel

operations such as disarming, but not programming. These codes can be any 3, 4, 5, or 6-digit

code, depending on the code length.

Duress

code The duress code is used to generate a silent duress alarm while disarming.

To set/change user access codes:

1. Enter the System Programming menu.

2. Scroll up/down to Access Codes, then press [ENTER].

3. Scroll up/down to Master Code, then press [ENTER].

4. The current value of the code now flashes. Enter the new code, then press [ENTER].

Press [STATUS] repeatedly to exit.

System Testing

Sensors

You can test your sensors one at a time to make sure they are sending strong signals to the panel. You

should test your system often.

To perform a sensor test:

1. Scroll to System Tests

2. Press [ENTER]. Enter the [master code].

3. Press [Enter]. The panel will display “Sensor Test”.

4. Press [Enter]. The display will show a list of sensors to be tested. For example, “Trip Sn 1 Front

Door”. The panel will sound six beeps once a minute while in Sensor Test mode.

5. Tripping a sensor will display which sensor has been tripped. For example, “Sn 1 Packets = 8 Front

Door”. Sensors will be removed off the list after testing.

6. When all sensors have been tested, the display shows Sn Test Complete, Press [STATUS].

7. Press [STATUS] to exit.

How to Trip a Sensor

Device To Trip Device

Door/window sensor Open the secured door or window.

Freeze sensor Apply ice to the sensor. Do not allow the sensor to get wet.

Press a wet rag or wet finger over both of the round, gold-plated terminals on the

Simon XT System Manual

https://alpha.adt.com/help/64[11/12/2018 9:41:49 PM]

Water sensor

underside of the sensor.

Carbon monoxide

sensor

Unplug the CO alarm. Plug it back in and press the [TEST/RESET] button until it

the unit beeps 8 times.

Glass guard sensor Tap the glass 3 or 4 inches (6 to 8 cm) from the sensor

Motion sensor Avoid the motion sensor's view for five minutes, then enter its view.

Shock sensor Tap the glass twice, away from the sensor. Wait at least 30 seconds before testing

again.

Smoke sensor Press and hold the test button until the system sounds transmission begins.

Wireless panic

button Press and hold the appropriate panic button for three seconds.

Keyfob Press and hold [LOCK] and [UNLOCK] simultaneously for three seconds.

Remote handheld

touchpad Press and hold the two emergency buttons simultaneously for three seconds.

Communication

You can test the communication between your system and ADT's Central Monitoring Centers.

To perform a communications test:

1. Scroll to Test Systems.

2. Press [ENTER]. Enter your [master code].

3. Press [ENTER]. Scroll to Comm Test and press [ENTER].

4. The display will show that Comm Test is on.

5. After a successful test, the display will show “Comm Test Ok”. If there was a failure, your display will

show “Comm Test Failure”.

To learn more about testing your system, please visit System Testing.

Other System Information

Common Zone Operation

Your system may have been set up to use a common zone, which is an area shared by users of both

partitions, such as a foyer or lobby. If so, please note the following:

The common zone will sound and report alarms only when both partitions are armed. If only one

partition is armed, the system ignores faults on the common zone.

Either partition may arm its system if the common zone is faulted, but once armed, the other

partition will not be able to arm unless the common zone is first bypassed or the fault is corrected.

Simon XT System Manual

https://alpha.adt.com/help/64[11/12/2018 9:41:49 PM]

Return to Top

Faults on the common zone are displayed on keypads in both partitions.

Either partition can clear and restore the common zone after an alarm.

Maintaining Your System

Silencing Low Battery Warning Tones at the Keypad

You can silence the keypad’s warning tones by pressing the OFF key, but the keypad's message display

will remain on as a reminder that you have a low battery condition in one or more of your sensors. When

you replace the weak battery with a fresh one, the sensor will send a signal to the control as soon as the

sensor is activated (opening/closing of door, window, etc.), causing the warning to be deactivated. If the

sensor is not activated, the display will automatically clear within approximately 1 hour.

Routine Care

Treat the components of your security system as you would any other electrical equipment. Do not

slam sensor-protected doors or windows.

Keep dust from accumulating on the keypad and all protective sensors, particularly on motion

sensors and smoke detectors.

The keypad and sensors should be cleaned carefully with a dry soft cloth. Do not spray water or any

other fluid on the units.

How can we help?

Autres manuels pour SIMON XT

Table des matières

Autres manuels GE Système de sécurité

GE 868 GEN2 Manuel utilisateur

GE NX-108E - Security NetworX NX-4 System Manuel utilisateur

GE INT-22.5R1-24 Manuel utilisateur

GE SIMON XT Manuel utilisateur

GE Simon Security System Manuel utilisateur

GE 610 Manuel utilisateur

GE BA300 Manuel de formation

GE Concord 4 Manuel utilisateur

GE AS610RF Manuel utilisateur

GE 45235 Manuel utilisateur

GE Allegro 60-874-95R Manuel utilisateur

GE SmartHome Series Manuel utilisateur

GE 45131 Manuel utilisateur

GE Concord 4 Manuel d'instructions

GE Concord Manuel utilisateur

GE 60-960-95 Manuel utilisateur

GE Interlogix 60-875 Simon Manuel utilisateur

GE 45413 Manuel utilisateur

GE Concord 4 Manuel d'instructions

GE VT71230-R3 Guide d'installation

GE 4 Series Manuel utilisateur

GE NX-10 Guide de l'utilisateur

GE 60-362 Manuel utilisateur

GE 600-1021-95R Manuel utilisateur

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur