GE SIMON XT Manuel utilisateur

Simon XT Installation

Manual

P/N 466-2265-02 • REV C • ISS 01FEB11

Trademarks and patents The Simon XT name and logo are trademarks of UTC Fire & Security.

GE and the GE monogram are trademarks of the General Electric

Company and are under license to Interlogix, a UTC Fire & Security

Company, 9 Farm Springs Road, Farmington, CT 06034-4065, USA

Other trade names used in this document may be trademarks or

registered trademarks of the manufacturers or vendors of the respective

products.

Manufacturer UTC Fire & Security Americas Corporation, Inc.

1275 Red Fox Rd., Arden Hills, MN 55112-6943, USA.

FCC compliance This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC rules. These limits

are designed to provide reasonable protection against harmful

interference when the equipment is operated in a residential

environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications.

FCC Part 15 registration number: B4Z-910C-SIMON

IC: 1175C-910CSIMO

Part 68. This equipment complies with Part 68 of the FCC rules and the

requirements adopted by the ACTA.

FCC registration number: US: B4ZAK02B55910

Canada: 1175C-910SIXT

Ringer Equivalence 0.2B

Load Number 0.2

Contact information

For contact information, see

www.interlogix.com

www.utcfireandsecurity.com.

Content

Product overview 1

System components 2

Standard panel 4

Planning the installation 5

Planning sensor types and locations 5

Cross-zoning 9

System configuration 10

Installation 14

Connecting hardwired devices 15

Wiring a phone line to the panel 17

Wiring the power transformer 19

Programming 21

Menu navigation 23

Set clock 24

Set date 25

Revision 25

Contrast 26

System programming 26

Access codes 27

Security 27

Phone numbers 29

Phone options 29

Sensors 31

Reporting 33

Timers 35

Touchpad options 37

System options 38

Siren options 38

Piezo beep options 40

Audio verification options 41

System tests 42

Resetting memory to factory defaults 42

Testing 43

Control panel 43

Sensors 44

Phone communication 46

Simon XT Installation Manual i

Offsite phone operation 47

Central station communication 47

Two-way voice operation 48

Voice event notification 49

Troubleshooting 50

Specifications 52

Sensor names 53

Simon XT system quick reference 57

ii Simon XT Installation Manual

Product overview

This security system can be used as a fire warning system, an intrusion alarm system,

an emergency notification system, or any combination of the three. The system has

three types of components:

• Self-contained control panel

• Devices that report to the panel

• Devices that respond to commands from the panel

Figure 1: Simon XT system

SimonXT

123

789

Key fob Door/window sensor

PIR motion sensor

Smoke detector

Remote handheld

touchpad

Simon XT talking

touch sc reen

The self-contained panel provides the main processing unit for all system functions. It

receives and responds to signals from wireless sensors and wireless touchpads

throughout the premises. For monitored systems, the panel can be connected to the

premises phone line for central monitoring station reporting.

You can program the panel onsite from the keypad or remotely using Enterprise

Downloader software. See “Programming” on page 21 for complete onsite

programming instructions.

Simon XT Installation Manual 1

System components

The system can monitor up to 40 sensors and may use any of the devices listed in

Table 1 below.

Table 1: Supported devices

Device Description

Door/window sensor

(60-670, 60-362N)

For intrusion protection, install door/window sensors on all ground-

floor doors and windows. At a minimum, install then in the following

locations:

• All easily accessible exterior doors and windows.

• Interior doors leading into the garage.

• Doors to areas containing valuables.

Indoor motion sensor

(60-639)

Indoor motion sensors are ideal whenever it is not practical to

install door/window sensors on every opening. Identify areas where

an intruder is likely to walk through. Large areas in an open floor

plan, downstairs family rooms, and hallways are typical locations

for indoor motion sensors. For installations with pets, use the SAW

Pet Immune PIR (60-807).

Outdoor motion sensor

(60-639)

Use outdoor motion sensors to detect motion in a protected

outdoor area. Detected motion in this protected area can sound

chimes.

Freeze sensor

(60-742)

Freeze sensors detect low temperature conditions, which may

indicate a furnace failure. The sensor contains a bimetallic thermal

switch connected to the built-in transmitter. The sensor transmits

an alarm signal to the panel when the surrounding temperature

drops to about 41ºF (5ºC). When the temperature rises to 50ºF

(10ºC), the sensor transmits a restore signal.

Water sensor

(60-744)

Water sensors detect water leaks and rising water. The detector is

connected to the sensor by an 8-foot cable. Water that reaches

both detector contact points activates the sensor, causing it to

transmit an alarm signal.

Smoke sensor

(60-848-02-95, TX-6010-01-1)

Smoke sensors provide fire protection by causing an alarm to

sound throughout the house. You can add smoke sensors near

sleeping areas and on every floor of the house. Avoid areas that

could have some smoke or exhaust such as attics, kitchens, above

fireplaces, dusty locations, garages, and areas with temperature

extremes. In these areas, you may want to install rate-of-rise

sensors to detect extreme temperature changes. See the

instructions packaged with the smoke sensor for complete

placement information.

Carbon monoxide (CO) alarm

(TX-6310-01-1)

The learn mode CO alarm alerts you to hazardous levels of carbon

monoxide gas. If dangerous concentrations of gas are present, the

red indicator light comes on, the internal siren goes off, and an

alarm is transmitted to the panel. The panel sounds its own alarm

and reports to the central station.

2 Simon XT Installation Manual

Device Description

Key fob

(60-659)

The key fob (keychain touchpad) lets you turn the system on and off

from right outside the home or activate a panic alarm if there is an

emergency. If you have the appropriate light control modules, you

can use key fobs to turn all system controlled lights on and off.

ELM (encrypted learn mode)

key fob

(60-832)

The ELM 2-button key fob is an alkaline battery-powered, wireless

touchpad that allows you to arm and disarm the system and

activate a police or auxiliary alarm. Random encrypted signal

transmissions provide high security to help prevent signal copying.

Remote handheld touchpad

(60-671)

The remote handheld touchpad lets you turn the system on and off

while in the home, turn system-controlled lights on and off, or

activate a panic alarm if there is a nonmedical emergency.

Simon XT talking touchpad

(60-924-3-XT)

The 2-way talking touchpad is a wireless device that provides a

convenient option to: arm the system (doors, windows, and motion

sensors), arm the system with no entry delay, disarm the system,

activate a panic alarm to call the central monitoring station in a

nonmedical emergency, check system status, and turn system

controlled lights on or off (all or individual), all while providing voice

feedback.

Simon XT talking touch screen

(60-924-3-XT-2WTTS,

60-924-RF-TS, 60-924-RF-TS-N)

The 2-way talking touch screen is a wireless device that provides a

graphical user interface that allows you to: arm the system (doors,

windows, and motion sensors), disarm the system, activate a panic

alarm to call the central monitoring station in a nonmedical

emergency, check system status, and turn system controlled lights

on or off, all while providing voice feedback. The touch screen also

provides trouble beeps, entry/exit beeps, and alarm sounds (Fire,

Aux., Police).

Water-resistant personal help

button

(60-906-95)

The water-resistant personal help button is a wireless device used

for activating police or auxiliary alarms through your system. When

the help button is pressed, the light mounted under the cover will

blink and an alarm signal is transmitted.

Caution: Do not use outdoor motion sensors for intrusion protection.

Simon XT Installation Manual 3

Standard panel

Table 2 below describes the basic panel (out-of-box) hardware capabilities for the

Simon XT 600-1054-95R-11 and 600-1054-95R-11-CN.

Table 2: Panel hardware capabilities

Hardware Capability

Power Input for an AC step-down, plug-in style transformer.

One siren output, up to two zone

inputs

Terminals for connecting hardware sirens or normally closed (NC)

loop switch circuits.

Phone line connection Allows the panel to communicate with the central monitoring

station and/or remote phone.

4 Simon XT Installation Manual

Planning the installation

This section describes system capabilities to help you get familiar with your system.

The planning sheets contain tables that let you record the hardware and

programming configuration of your system. Complete all of the information ahead of

time to help prepare for system installation. See “Sensor names” on page 53 for

sensor name segments listed alphabetically and by index number.

Locate the panel where alarm sounds can be heard and where the panel will be

easily accessible for operation. Do not install the panel near a window or door where

it can be reached easily by an intruder.

Planning sensor types and locations

The first step to an easy and successful installation is to decide what areas or items

to protect, which lights to operate, and the best location for the panel, touchpad,

sensors, and sirens. Metal objects, mirrors, and metallic wallpaper can block signals

sent by the wireless sensors. Make sure there are no metal objects in the way when

installing the system.

Use Table 3 below and Table 4 on page 6 to determine the appropriate sensor type

for the sensors you will be adding, and Table 5 on page 8 to document the planned

sensor information. You will need to understand the application for each sensor.

Table 3: Recommended sensor groups

Device Recommended sensor group

Indoor motion sensor 17 (intrusion), 25 (chime)

Outdoor motion sensor 25 (chime only)

Entry/exit door 10

Interior door 14

Window sensor 13

Smoke sensor 26

Key fob 01, 03, 06, 07

ELM key fob 01, 03, 06, 07

Remote and Simon XT talking touchpads 01, 03, 06, 07

Simon XT talking touch screen 00, 01, 04, 05, 06, 07

CO alarm 34

Freeze sensor 29

Water sensor 38

Property/asset management 43

Personal help button 01, 03, 06, 07

Simon XT Installation Manual 5

Table 4: Sensor group characteristics

Type

Name/application

Siren type

Dela

Restoral

Supervised

Active in

arming

levels

00 Fixed panic: 24-hour audible fixed emergency button. Intrusion I N Y 01234

01 Portable panic: 24-hour audible portable emergency

button.

Intrusion I N N 01234

02 Fixed panic: 24-hour silent fixed emergency button.

Status light will not blink.

Silent I N Y 01234

03 Portable panic: 24-hour silent portable emergency

buttons. Status light will not blink.

Silent I N N 01234

04 Fixed auxiliary: 24-hour auxiliary sensor. Emergency I N Y 01234

05 Fixed auxiliary: 24-hour emergency button. Siren shut

off confirms CS report.

Emergency I N Y 01234

06 Portable auxiliary: 24-hour portable auxiliary alert

button.

Emergency I N N 01234

07 Portable auxiliary 24-hour portable auxiliary button.

Siren shut off confirms CS report.

Emergency I N N 01234

08 Special intrusion: Such as gun cabinets and wall safes. Intrusion I Y Y 1234

09 Special intrusion: Such as gun cabinets and wall safes. Intrusion S Y Y 1234

10 Entry/exit delay: A delay that requires a standard delay

time. Chime.

Intrusion S Y Y 24

13 Instant perimeter: Exterior doors and windows. Chime. Intrusion I Y Y 24

14 Instant interior: Interior door. Intrusion F Y Y 234

15 Instant interior: Interior PIR motion sensor. Intrusion F Y Y 234

16 Instant interior: Interior door. Intrusion F Y Y 34

17 Instant interior: PIR motion sensor and sound sensor. Intrusion F N Y 34

18 Instant interior: Cross-zone PIR motion sensor. Intrusion F N Y 34

19 Delayed interior: Interior doors that initiate a delay

before going into alarm.

Intrusion S Y Y 34

20 Delayed interior: PIR motion sensor that initiates a delay

before going into alarm.

Intrusion S N Y 34

21 Local instant interior: 24-hour local alarm zone

protecting anything that opens and closes. No report.

Intrusion I Y Y 1234

22 Local delayed interior: Same as group 21, plus

activation initiates a delay before going into alarm. No

report.

Intrusion S Y Y 1234

23 Local instant auxiliary: 24-hour local alarm zone

protecting anything that opens and closes. No report.

Emergency I Y Y 01234

6 Simon XT Installation Manual

Autres manuels pour SIMON XT

Table des matières

Autres manuels GE Système de sécurité

GE 50246 - Smart Home Door Stop Alarm Manuel utilisateur

GE 610 Manuel utilisateur

GE NX-108E - Security NetworX NX-4 System Manuel utilisateur

GE 60-806-95R-16Z - Security Concord Express System Control... Manuel utilisateur

GE 45255 Manuel utilisateur

GE 600-1064-95R b Manuel utilisateur

GE AL-1291 Point ID Manuel utilisateur

GE Concord express Manuel utilisateur

GE SuperBus 2000 Manuel utilisateur

GE GEC-4VDPC Instructions de montage

GE Deluxe 45117 Manuel utilisateur

GE Advent Manuel utilisateur

GE INT-22.5R1-24 Manuel utilisateur

GE 60-960-95 Manuel utilisateur

GE 45133 Manuel utilisateur

GE TX-7201-05-1 Manuel utilisateur

GE SIMON XT Manuel d'instructions

GE SmartHome Series Manuel utilisateur

GE 45411 Manuel utilisateur

GE 8RP Board Instructions de montage

GE Choice-Alert 45136 Manuel utilisateur

GE Concord 4 Series Manuel utilisateur

GE JSC1300 Manuel utilisateur

GE Concord 4 Manuel d'instructions

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur