GE Concord express Mode d’emploi

Troubleshooting

Trouble Beeps and Trouble Messages

Trouble beeps are a series of ve short beeps, once a minute. When your system detects a problem, it lets

you know by sounding trouble beeps from touchpads and sirens, and by trouble messages on touchpad

displays.

Silencing Trouble Beeps

If possible, correct the situation which is causing the trouble beeps. If this is not possible, call for service. If

the problem is not corrected, trouble beeps and messages start again 4 to 10 hours later.

To stop trouble beeps:

Perform a system status check by pressing *‚ on a touchpad, Change the arming level.

Frequently Asked Questions

Q. I can’t arm my system.

A. Try the following:

• If arming to Level 2—STAY or Level 3—AWAY, make sure all monitored perimeter doors and windows are

closed.

• Press ‚ for a system status and for clues to the problem.

• Call your security dealer.

Q. I cannot bypass a sensor: my alphanumeric touchpad displays“INVALID” and my xed display touchpad

sounds a single, long beep.

A. Possible explanations include:

• The sensor you’re trying to bypass may not be active in the current arming level. For example, an interior

motion detector will not be active in Level 2—STAY.

• Some sensors can be bypassed only in certain levels. For example, motion sensors in Level 3—AWAY.

• You may be trying to bypass a 24-hour sensor that cannot be bypassed, such as a smoke detector.

Q. I can’t arm my system to Level 3—AWAY.

A. If a delay door is open while you’re trying to arm the system to Level 3, the system will arm to Level 2

instead. Close the delay door, arm the system to Level 3, then exit through a delay door.

Autres manuels pour Concord express

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels GE Système de sécurité

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur