GE SIMON XT Manuel utilisateur

Simon XT User Manual

600-1054-95R-11 and 600-1054-95R-11-CN

P/N 466-2266-02 • REV B • ISS 13JAN11

Trademarks and patents The Simon XT name and logo are trademarks of UTC Fire & Security.

GE and the GE monogram are trademarks of the General Electric

Company and are under license to Interlogix, a UTC Fire & Security

Company, 9 Farm Springs Road, Farmington, CT 06034-4065, USA

Other trade names used in this document may be trademarks or

registered trademarks of the manufacturers or vendors of the respective

products.

Manufacturer UTC Fire & Security Americas Corporation, Inc.

1275 Red Fox Rd., Arden Hills, MN 55112-6943, USA.

FCC compliance This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC rules. These limits

are designed to provide reasonable protection against harmful

interference when the equipment is operated in a residential

environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications.

FCC Part 15 registration number: B4Z-910C-SIMON

IC: 1175C-910CSIMO

Part 68. This equipment complies with Part 68 of the FCC rules and the

requirements adopted by the ACTA.

FCC registration number: US: B4ZAK02B55910

Canada: 1175C-910CSIXT

Ringer Equivalence 0.2B

Load Number 0.2

Contact information

For contact information, see

www.interlogix.com

www.utcfireandsecurity.com.

Content

Introduction 1

Using the Simon XT security system 3

Panel controls 3

Simon XT features 5

Home security 6

Exit/entry delay 8

Bypassing sensors 9

Alarms 10

Chimes 11

Latchkey 11

System status 12

Using an offsite phone 12

Touchpads and key fobs 13

How your system communicates 14

Status beeps 14

Alarm sirens 15

Panel indicator lights 15

Trouble beeps 16

Programming 18

System menu 18

Code options 18

Menu navigation 19

Set clock 20

Set date 20

Chime 21

Special chime 21

System tests 21

Revision 22

Contrast 22

System programming 22

Testing 27

Sensor test 27

Communication test 28

System download 29

Simon XT User Manual i

Reference information 30

Alarm system limitations 30

Emergency planning 31

Sensor and module locations 32

Access codes 33

Delays 34

Simon XT system quick reference 34

ii Simon XT User Manual

Introduction

The Simon XT uses wireless technology to warn your family about intrusion, carbon

monoxide and fire. The system communicates with a central monitoring station and

sends voice messages to an offsite phone.

The security system uses sensors that communicate alarms to the control panel

using radio waves. The system is supervised, meaning that the panel checks the

status of each sensor to detect problems. If the panel detects trouble, it will notify you

with displayed and spoken messages, beeps, and indicator lights on the panel itself.

A Simon XT installation may include any of the devices listed in Table 1 below.

Table 1: Simon XT system components

Component Type Description

Control panel Operates and programs your security system. It communicates

to you through displayed and spoken messages. The panel can

communicate to a central monitoring station and send voice

messages to your offsite phone.

Remote handheld Controls the security system primarily from within the house.

Simon XT talking

touchpad a

Controls the security system primarily from within the house.

Simon XT talking

touch screen a

Controls the security system primarily from within the house.

Touchpads

Key fob aThis keychain touchpad controls the security system from

within or near the outside of your home.

Indoor motion Detects motion in protected indoor area. When motion is

detected, the panel may respond by sounding chimes or an

alarm.

Outdoor motion Detects motion in a protected outdoor area. When motion is

detected, the system may respond by sounding chimes or

turning on outside lights. These sensors are not used for

intrusion detection.

Door/window Detects the opening of a door or window.

Smoke Detects smoke or a significant rise in temperature. They have a

built-in siren that sounds when smoke or a significant rise in

temperature is detected.

Freeze aDetects furnace failure. If the inside temperature drops below

41ºF (5ºC), the sensor will notify the panel. The sensor will send

a restore signal to the panel when the temperature rises to

50ºF (10ºC).

Carbon monoxide aDetects carbon monoxide. They have a built-in siren that

sounds when carbon monoxide is detected.

Sensors

Personal help

button a

A wireless device used for activating police, fire, or auxiliary

alarms through your security system.

a. Not verified for use by UL.

Simon XT User Manual 1

You can send commands or instruct your security system through a series of key

presses on the panel, touchpads, or a remote telephone.

Table 2: System communication devices

Device Description

Control panel You can enter commands for your security system through simple key

presses on the panel. Depending on how your system is programmed,

you may need to enter an access code for certain commands. An access

code is a numeric code that allows authorization to operate your security

system.

Remote handheld

touchpad

This touchpad gives you the option to enter commands from any room in

your house. You can enter commands through simple key presses on the

touchpad.

Simon XT talking touchpad The two-way talking touchpad is a wireless device that provides a

convenient option to: arm the system (doors, windows, and motion

sensors), arm the system with no entry delay, disarm the system, activate

a panic alarm to call the central monitoring station in a nonmedical

emergency, check system status, and turn system controlled lights on or

off (all or individual), all while providing voice feedback.

Simon XT talking touch

screen

The two-way talking touch screen is a wireless device that provides a

graphical user interface that allows you to: arm the system (doors,

windows, and motion sensors), disarm the system, activate a panic alarm

to call the central monitoring station in a nonmedical emergency, check

system status, and turn system controlled lights on or off, all while

providing voice feedback. The touch screen also provides trouble beeps,

entry/exit beeps and alarm sounds (Fire, Aux, Police).

Key fob Key fobs are handy for simple arming and disarming control functions.

They are portable and can be carried offsite in a purse or pocket.

Telephone Touchtone telephones can be used to communicate with your system

while you are offsite. Ask your installer if you have this feature.

Note: The default master code is 1-2-3-4 when the security system is shipped from

the factory. You should change your code after your system is installed.

2 Simon XT User Manual

Using the Simon XT security system

You can operate the self-contained security system through several different

methods:

• Use the front panel buttons to arm/disarm the system when you enter or exit your

home and to determine which sensors are active and the system status.

• Use the three fast action keys to communicate with the central monitoring station

to report emergency (auxiliary), police, or fire alarms.

• Use a combination of the panel buttons and the display menu to program certain

user features. This method is used by your installer to establish your system

configuration. (See “Programming” on page 18.)

Panel controls

The self-contained panel provides the user interface for system operation and

programming system functions.

Figure 1: Simon XT controls

Simon XT

123

456

789

Table 3 on page 4 provides a description of the panel keys and display.

Simon XT User Manual 3

Table 3: Panel keys and features

Control Description

Piezo siren Provides alarm beeps and status beeps.

LCD display Provides a 2 x 16 character array that displays a variety of phrases

and icons.

Scroll up/scroll down arrows Press to scroll through lists of similar items.

OK Press to select a particular menu item or commit to panel memory a

menu item that has just been programmed.

Doors+Windows Press to arm perimeter sensors.

Motions Press to arm interior sensors.

Disarm Press to turn off intrusion/burglary protection for your system. Only

intrusion/burglary sensors are disarmed. Environmental sensors, such

as smoke and carbon monoxide detectors, stay active at all times.

Status Press to determine system status.

Silent Press to silence exit beeps when arming.

Bypass Press to bypass a sensor.

Emergency (cross)

Police (shield)

Fire (flame)

Press and hold for 2 seconds (or press twice quickly) to call the central

monitoring station and notify them of a nonmedical call for help.

Microphone Use to communicate with the central monitoring station after an

alarm.

Numeric keypad Press the keys (0 through 9, *, #) to enter access codes or other

numerical data.

* (light bulb) Press to turn lights on. (Contact UTC Fire & Security for required

equipment information.) Not verified for use by UL.

# (dark light bulb) Press to turn lights off. (Contact UTC Fire & Security for required

equipment information.) Not verified for use by UL.

Speaker Provides voice output and sounds key beeps.

Standard text display

While the panel is idle, the text displays:

Display line 1 Arming level

Display line 2 HH:MMx (Time) and status icons

4 Simon XT User Manual

Arming level text could be one of the following:

• Subdisarmed

• Disarmed

• Doors+Windows

• Motions

• Doors+Windows and Motions

The phrase “no delay” is appended to the arming level when no entry delay is active.

Possible status icons include:

• Chime (solid bell)

• Special chime (outlined bell)

• Latchkey on (key)

LEDs

Every key on the front keypad has an LED behind it, except for the scroll arrow keys.

There are four status LEDs behind the row of keys below the LCD display. These

status LEDs indicate the arming level. There is one status LED behind the OK button.

This status LED is lit when there are no open sensors in the system. All other LEDs are

controlled as a group and provide backlighting for the keypad for 30 seconds after a

key is pressed.

Simon XT features

The Simon XT features provide you with the ability to perform the following functions:

• Arm perimeter (doors and windows) and interior (motion) sensors to indicate

intruders.

• Use one button to send quick response alerts to the central monitoring station.

• Access the system from a key fob (similar to the one used for your car).

• Access the system from a remote telephone.

• Disable sensors so you can leave a window open while the system is armed.

• Get an audio alert when a protected door is opened while the system is disarmed.

• Have the system notify you if your children do not arrive at home by a

predetermined time.

• Get an audio alert if movement of a protected asset is detected (group 43).

Simon XT User Manual 5

Home security

The Simon XT allows you to control which sensors are active at any given time.

Table 4 below describes the arming levels that you can set from the control panel.

Table 4: Arming levels

Level Function Description

0 Subdisarm If your system includes 24-hour protection sensors, you must

subdisarm the panel before accessing these areas to avoid

causing an alarm. Environmental sensors (such as smoke or

carbon monoxide detectors) stay active at all times.

1 Disarm In this level, only 24-hour sensors are active. Environmental

sensors (such as smoke or carbon monoxide detectors) stay

active at all times.

2 Arm door and window

sensors (exterior)

This level arms the door and window sensors, while leaving the

interior motion sensors disarmed.

3 Arm motion sensors (interior) This level arms the interior motion sensors, while leaving the

exterior door and window sensors disarmed.

4 Arm doors/windows and

motion sensors

This level arms all sensors.

Arming/disarming

Arming a sensor makes it active and allows the panel to generate an alarm when a

door or window is opened or when an unauthorized person enters a specific area.

Disarming makes the sensor inactive in the system. The current arming level is shown

on the panel display and changes in arming level are announced on the speaker.

To subdisarm (level 0):

1. Enter the master code while the system is disarmed.

The panel displays and speaks Subdisarmed, the Disarm button blinks, and the

panel beeps once.

2. When you finish accessing the temporarily unprotected areas, press Disarm to

return to the disarmed level.

To disarm (level 1):

1. Press Disarm.

2. Enter your code when the display shows Enter Code.

The panel displays and speaks Disarmed, the Disarm button lights up, and the

panel beeps once.

6 Simon XT User Manual

Autres manuels pour SIMON XT

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels GE Système de sécurité

GE 1200 Series Manuel utilisateur

GE Wireless Color Digital Home Monitoring Kit Manuel utilisateur

GE 8RP Board Instructions de montage

GE Simon XTi Manuel utilisateur

GE Advent Manuel utilisateur

GE Security Pro 500 Manuel utilisateur

GE VT71230-R3 Guide d'installation

GE NX-108E - Security NetworX NX-4 System Manuel utilisateur

GE BA300 Manuel de formation

GE Choice-Alert 45136 Manuel utilisateur

GE 45236 Manuel utilisateur

GE SIMON XT Manuel utilisateur

GE JSC1300 Manuel utilisateur

GE Interlogix 60-875 Simon Manuel utilisateur

GE Concord 4 Manuel utilisateur

GE 60-362 Manuel utilisateur

GE GEC-4VDPC Instructions de montage

GE 45255 Manuel utilisateur

GE AS272 Manuel utilisateur

GE Interlogix 60-875 Simon Manuel utilisateur

GE CareGard Manuel utilisateur

GE ARITECH AS399 Manuel utilisateur

GE Silent Alert 45137 Manuel utilisateur

GE SIMON XT Manuel utilisateur

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur