Fujitsu ETERNUS DX60 Manuel utilisateur

Preparation

STEP

Refer to the "Package Contents" and check that there are no missing items.

The latest version of this document and the latest information about the ETERNUS DX60/DX80 is released in the following web-site. Access the following address if needed.

http://www.fujitsu.com/global/services/computing/storage/eternus/products/diskstorage/dx-entry/

The company names, product names and service names mentioned in this document are registered trademarks or trademarks of their respective companies.

This guide describes the workow required to proceed from installation to

operation of the (SAS model).

P3AM-3102-04EN

Setup Guide (SAS model)

Read and understand the "Safety Precautions"

before use.

"Safety Precautions"

Basic Setup

Monitoring Setup

Server Connection

Operation and Maintenance

Preparation

Installation

Cable Connection

Startup

Workow

Read this Setup Guide first

Disk storage system

Proceed to

next step

Check that the installation area meets the space requirements

of the rack in which the ETERNUS DX60/DX80 is to be installed.

Installation space

Installation requirements

Check that the installation area satises all the requirements

described in the "Instructions for installation" section of the

"Safety Precautions".

Temperature: 5 – 40°C, Humidity: 20 – 80%RH

Environmental conditions

Power outlets

Check that a sufficient number of suitable wall outlets are

available.

Installation and Connection Preparation

"5.1 Installation Preparation" in the "User Guide"

"6.1 Connection Preparation" in the "User Guide"

"Safety Precautions"

Setup Preparation

"7.1 Setup Preparation" in the "User Guide"

Package Contents Check

"Package Contents"

Prepare the following manuals:

Documentation CD

"Safety Precautions"

"Package Contents"

Other related manuals, for example, for a server or

networking equipment.

When ETERNUS SF Express is used, prepare the following

software and User's Guide:

ETERNUS SF Express Media Pack

"ETERNUS SF Express User's Guide"

ETERNUS DX60/DX80



Rack mount kit



Misc. documents



Misc. cables



Complete the following information in the Network Settings

label and attach it on the ETERNUS DX60/DX80.

IP address and subnet mask for the ETERNUS DX60/

DX80

IP address for maintenance work

Completing and attaching the Network Settings label

Setup Network Environment

IP address: 192.168.1.2

Subnet mask: 255.255.255.0

Set the Web browser

Proxy server and Cache : Disable

Java Script, style sheets, and cookies : Enable



Settings for the PC

(Front rack pillars)

(Rear rack pillars)

"R" is stamped on the inner

side of the right rack rail.

"L" is stamped on the inner

side of the left rack rail. Loosen the screws,

and adjust the rack rails to

the depth of the rack.

[Left]

[Right]

Adjust the rack rail (bracket)

size to t the rack.

STEP Installation

ETERNUS DX60/DX80

1st position

(M5 screws)

3rd position

(M5 screws)

1st position

(M5 screws)

3rd position

(M5 screws) 2U

[Screw location of the rack rail (bracket)]

Tighten the screws in the same locations on both the front and rear sides of the rack pillars

[Left] [Right]

Rack rail (bracket)

Base line of the

ETERNUS DX60/DX80

Make sure to install or remove the enclosure

to or from the rack by two or more people.

Multiple Drive Enclosures must be connected

to the controller enclosure following the order

of the "DE_No. label" numbers attached to

each Drive Enclosure. The position of the

labels are in the positions shown below.

●

IMPORTANT

Between the EXP#0 and

EXP#1 expanders at the rear

of the drive enclosure

DE_No. label

At the right side of the front of

the drive enclosure

STEP Cable Connection

When Drive Enclosures are installed, miniSAS cables are

used to connect between the SAS ports of the enclosures.

Connect the Controller Enclosure to Drive Enclosure 1, Drive

Enclosure 1 to Drive Enclosure 2, Drive Enclosure 2 to Drive

Enclosure 3, etc. The number of Drive Enclosure can be

checked with the "DE_No." label.

Various cables need to be connected to the rear of the

ETERNUS DX60/DX80.

Rear view

Controller

Enclosure

Cable

LAN Cables

MiniSAS Cables (for Drive Enclosures)

Use release ties to hold the power cords in place.

Power Cords

Rear view

Controller

Enclosure

Drive

Enclosure

Cord

Rear view

Controller

Enclosure

Drive

Enclosure

Drive

Enclosure

Cable

MiniSAS Cables (for Host Interface)

Rear view

Controller

Enclosure

Cable

The SAS (OUT) port is on the left side, and

SAS (IN) port is on the right side.

Insert the connector with a mark on its

underside in the SAS (OUT) port.

Insert the connector with a mark on its underside in the

SAS (IN) port.

To help with cable management and prevent

incorrect connection, attach labels to the cables

and make a note of connection origins and

destinations.

Point

The cables should never be bent, twisted or

pulled.

IMPORTANT

Underside of

the SAS (OUT) side plug

Underside of

the SAS (IN) side plug

The RMT port is on the left side, and MNT port

is on the right side.

The MNT port must always be connected. The

RMT port only needs to be connected when the remote

support connection is to be independent of the customer

network.

For each CM, the port numbers are (left to right)

0 and 1. Connect a miniSAS cable to each of

these ports.

Example for connection of miniSAS cable

(when two Drive Enclosures are installed)

The rack rail (bracket) needs to be attached to the rack and the ETERNUS DX60/DX80 mounted.

Attach the rack rails (brackets) to the rack. The size of the

ETERNUS DX60/DX80 is 2U.

Mount the ETERNUS DX60/DX80 in the rack.3.

Fasten the ETERNUS DX60/DX80 to the rack.4.

"5.2 Rack Installation" in the "User Guide"

"6.2 LAN Cable Connection (for Operation Management)" in the "User

Guide"

"6.5 MiniSAS Cable Connection (For SAS)" in the "User Guide"

"6.6 MiniSAS Cable Connection (For Drive Enclosures)" in the "User

Guide"

"6.7 Power Cord Connection" in the "User Guide"

Basic Setup

STEP

Set the necessary environment for operating the ETERNUS

DX60/DX80 with its initial setup.

The [Initial Setup] screen appears by clicking the [Initial

Setup] menu on the [Easy Setup] tab.

This screen is used to set the following items:

Set Date and Time

Set Storage System Name

Change Password

Set SAS Port Parameters

Setup Network Environment

Initial Setup

Startup

STEP

Perform the necessary settings to operate the ETERNUS

DX60/DX80 using the Conguration Wizard.

The [Configuration Wizard] screen appears by clicking the

[Conguration Wizard] button on the [Easy Setup] tab.

The [Assign Hot Spare] screen appears by clicking [Assign

Hot Spare] under the [RAID Group Management] menu on the

[Volume Settings] tab.

Configuration Wizard

Assigning Hot Spares

Create RAID Group nCongure Afnity Group

Create Volumen Dene LUN Mapping

Dene Host

Default R AID groups, volumes and af finity

groups are preset in the factory. Refer to "Web

GUI User Guide" if the preset values are to be

changed.

Point

The first time the power is turned on, volume

formatting may start according to the factory

default settings. This does not affect the setup

operation, which may be started immediately.

IMPORTANT

"7.1 Setup Preparation" in the "User Guide"

"7.2 Basic Setup" in the "User Guide"

Basic ETERNUS DX60/DX80 setup is performed by accessing

the "Initial Setup" and "Conguration Wizard" functions with a

Web browser.

Start the Web browser on the PC and enter either of the

following URLs in the address bar of the Web browser.

http://192.168.1.1/

https://192.168.1.1/

Enter the following user name and password, and click the

[Logon] button to logon to the ETERNUS DX60/DX80.

User name: root

Password: root (Default)

After logging on, the Storage System Status screen

appears.

After completing these settings with the Finish step, close

the web browser to end the setup session, then detach the

direct connection LAN cable (for operation management)

from the PC and connect it to the normal network. Then

try logging on again via the normal network, using the IP

address that has just been set.

"7.2.1 Initial Setup" in the "User Guide"

"7.2.2 Conguration Wizard" in the "User Guide"

"7.2.3 Hot Spare Registration" in the "User Guide"

Check the factory settings and register a hot

spare as required.

Point

Connect the PC to the ETERNUS DX60/DX80 with a LAN cable (for operation management), and turn on the ETERNUS DX60/

DX80.

Controller

Enclosure

Power switch

When ETERNUS SF Express is used, perform

the foll ow ing setup, and then r efer to the

"ETERNUS SF Express User's Guide" to install

the ETERNUS DX Disk storage system.

Initial Setup

Set Date and Time

Set Storage System Name

Change Password

Setup Network Environment

●

Point

Monitoring Setup

STEP

Server Connection

STEP

Operation and Maintenance

STEP

Remote support allows prompt detection and resolution of trouble.

Point

Various tasks need to be performed before the ETERNUS DX60/DX80 can be connected to the server. These include the

installation of the appropriate drivers.

Check which server OS, and/or SAS card are to be connected to before starting this step.

For details on the setting, refer to "ETERNUS DX Disk storage systems Server Connection Guide (SAS)"(*).

* : Download from the specied web-site in the Documentation CD.

All necessary settings are complete, and the ETERNUS DX60/DX80 is now ready for normal operation.

Status check

Data backup

Maintenance support period

The status of the ETERNUS DX60/DX80 should be regularly monitored by checking the LEDs and using the Web browser.

Important data should be regularly backed up to a tape drive or similar device as a precaution against system failures.

The maintenance support period for the ETERNUS DX60/DX80 is 5 years from the date of purchase.

This manual uses recycled paper.

ETERNUS DX60/DX80 Disk storage system Setup Guide

(SAS model)

P3AM-3102-04EN

Date of issuance: July 2010

Issuance responsibility: FUJITSU LIMITED

Printed in Japan

The contents of this manual may be updated without notice.

While the contents of this manual are the product of all due care and

diligence, no responsibility can be accepted for operational problems

arising from any errors or missing information, or other use of the

information contained in this manual.

Fujitsu assumes no liability for damages to third party copyrights or

other rights arising from the use of any information in this manual.

Contents of this manual are not to be reproduced without permission

from Fujitsu.

Manuals with missing or wrongly collated pages will be replaced free of

charge.

Perform the ETERNUS DX60/DX80 monitoring setup if required.

Notication of ETERNUS DX60/DX80 problems as they occur is possible if the event notication method and level have

been set.

For e-mail notication of ETERNUS DX60/DX80 problems, a destination e-mail address must be set.

If "ServerView" is used to monitor the server, the ETERNUS DX60/DX80 must be set to send an SNMP Trap to the server.

If remote support is required, the ETERNUS DX60/DX80 must be set to notify the remote support center of failures.

"7.4 Monitoring Setup" in the "User Guide"

"7.5 Server Connection Setup" in the "User Guide"

"ETERNUS DX Disk storage systems Server Connection Guide (SAS)"

for Windows® - for Linux

for Solaris™ Operating System - ETERNUS DX Disk Storage System Settings for ETERNUS DX60/DX80

for VMware® ESX

Autres manuels pour ETERNUS DX60

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Fujitsu Stockage

Fujitsu

Fujitsu ETERNUS DX Disk Manuel utilisateur

Fujitsu

Fujitsu ETERNUS DX8100 S3 Manuel technique

Fujitsu

Fujitsu Eternus DX80 S2 Manuel utilisateur

Fujitsu

Fujitsu ETERNUS LT160 Manuel utilisateur

Fujitsu

Fujitsu MHV2120BH Manuel utilisateur

Fujitsu

Fujitsu ETERNUS LT140 Manuel utilisateur

Fujitsu

Fujitsu ETERNUS DX60 Manuel utilisateur

Fujitsu

Fujitsu MHV2080BS Manuel utilisateur

Fujitsu

Fujitsu MHC2032AT Manuel utilisateur

Fujitsu

Fujitsu MAT3300NC Manuel utilisateur

Fujitsu

Fujitsu MHV2040AH - Mobile - Hard Drive Manuel utilisateur

Fujitsu

Fujitsu MHT2060BH - Mobile 60 GB Hard Drive Manuel utilisateur

Fujitsu

Fujitsu ETERNUS LT20 S2 Manuel utilisateur

Fujitsu

Fujitsu ETERNUS DX500 S4/DX600 S4 Mode d’emploi

Fujitsu

Fujitsu FibreCAT S80 Manuel utilisateur

Fujitsu

Fujitsu MAN3184MC - Enterprise 18.4 GB Hard Drive Manuel utilisateur

Fujitsu

Fujitsu Eternus DX80 S2 Manuel utilisateur

Fujitsu

Fujitsu ETERNUS DX100 S4 Instructions de montage

Fujitsu

Fujitsu MAP3147NC - Enterprise - Hard Drive Manuel utilisateur

Fujitsu

Fujitsu ETERNUS DX60 S2 Manuel utilisateur

Fujitsu

Fujitsu MAV2036RC - 36.7 GB Hard Drive Manuel utilisateur

Fujitsu

Fujitsu MHG2102AT - Mobile 10 GB Hard Drive Manuel utilisateur

Fujitsu

Fujitsu PG-HDH97A Manuel utilisateur

Fujitsu

Fujitsu ETERNUS2000 100 Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur