Fujitsu ETERNUS DX Disk Manuel utilisateur
FUJITSU Storage
ETERNUS DX, ETERNUS AF
Configuration Guide -Server Connection-
(iSCSI) for Oracle Solaris
P3AM-4042-18ENZ0
This page is intentionally left blank.
Preface
This manual briefly explains the operations that need to be performed by the user in order to connect an
ETERNUS DX/AF to a server running Solaris OS via an iSCSI interface.
This manual should be used in conjunction with any other applicable user manuals, such as those for the
ETERNUS DX/AF, server, OS, LAN cards, and drivers.
Refer to "Configuration Guide -Server Connection- Notations" for the notations used in this manual such as
product trademarks and product names. For storage systems that are supported by the OS, refer to the Server
Support Matrix of the ETERNUS DX/AF.
18th Edition
May 2017
The Contents and Structure of this Manual
This manual is composed of the following ten chapters.
•"Chapter 1 Workflow" (page 6)
This chapter describes how to connect the ETERNUS DX/AF to a server.
•"Chapter 2 Checking the Server Environment" (page 8)
This chapter describes which servers can be connected to ETERNUS DX/AF storage systems.
•"Chapter 3 Notes" (page 9)
This chapter describes issues that should be noted when connecting the ETERNUS DX/AF storage systems
and server.
•"Chapter 4 Checking the Server Information" (page 13)
This chapter describes how to check the server information registered in the ETERNUS DX/AF.
•"Chapter 5 Installing and Setting Up ETERNUSmgr" (page 14)
This chapter describes how to install ETERNUSmgr.
•"Chapter 6 Setting Up the ETERNUS DX/AF" (page 15)
This chapter describes how to use ETERNUS Web GUI or ETERNUSmgr to set up the ETERNUS DX/AF storage
systems.
•"Chapter 7 Installing the iSCSI Software Initiator and Setting Up the Server" (page 16)
This chapter describes how to install the iSCSI Software Initiator and set up the server.
•"Chapter 8 Checking Connections" (page 23)
This chapter describes how to check the connection status between the server and ETERNUS DX/AF.
•"Chapter 9 Setting the Multipaths" (page 24)
This chapter describes what to be set in order to create multipath environment.
•"Chapter 10 Setting a File System" (page 26)
This chapter describes how to create a file system.
3
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (iSCSI) for Oracle Solaris
Copyright 2017 FUJITSU LIMITED
P3AM-4042-18ENZ0
Table of Contents
Chapter 1 Workflow 6
Chapter 2 Checking the Server Environment 8
2.1 Hardware ....................................................................................................................................... 8
2.2 OS (Operating System)................................................................................................................... 8
2.3 Network Interface Card................................................................................................................... 8
2.4 Multipath Configuration................................................................................................................. 8
Chapter 3 Notes 9
3.1 LAN Environment Notes ................................................................................................................. 9
3.2 Server Startup and Power Supply Control Notes............................................................................ 12
3.3 Jumbo Frame Setting Notes.......................................................................................................... 12
3.4 Notes on Configuring an iSCSI Boot Environment......................................................................... 12
Chapter 4 Checking the Server Information 13
Chapter 5 Installing and Setting Up ETERNUSmgr 14
Chapter 6 Setting Up the ETERNUS DX/AF 15
Chapter 7 Installing the iSCSI Software Initiator and Setting Up the Server 16
7.1 Installing the iSCSI Software Initiator ........................................................................................... 16
7.2 Setting Up the Server.................................................................................................................... 16
7.2.1 Setting Up the Command Queue Depth ..............................................................................................................16
7.2.2 iSCSI Basic Settings .............................................................................................................................................18
7.2.3 Server Settings when CHAP Authentication is Used.............................................................................................19
7.2.4 Server Settings when Bidirectional CHAP Authentication is Used........................................................................21
Chapter 8 Checking Connections 23
8.1 Turning on the Devices................................................................................................................. 23
8.2 Setting Up the Server to Recognize the Logical Units ................................................................... 23
4
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (iSCSI) for Oracle Solaris
Copyright 2017 FUJITSU LIMITED
P3AM-4042-18ENZ0
Chapter 9 Setting the Multipaths 24
9.1 Enabling MPxIO............................................................................................................................ 24
9.2 Editing "/kernel/drv/scsi_vhci.conf" ............................................................................................... 24
9.3 Reconfiguring and Restarting the Server ...................................................................................... 25
Chapter 10 Setting a File System 26
Table of Contents
5
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (iSCSI) for Oracle Solaris
Copyright 2017 FUJITSU LIMITED
P3AM-4042-18ENZ0
Chapter 1
Workflow
Exactly which documents are required depends on the connection environment, see the "Workflow" section
that follows for details.
IPv4 is used for IP address examples in this manual.
Required Documents
•"Server Support Matrix"
•"Configuration Guide -Server Connection- Storage System Settings" that corresponds to the ETERNUS DX/AF
to be connected
•"ETERNUS Web GUI User's Guide"
•"ETERNUSmgr Install Guide"
•"ETERNUSmgr User Guide"
6
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (iSCSI) for Oracle Solaris
Copyright 2017 FUJITSU LIMITED
P3AM-4042-18ENZ0
Workflow
Installing ETERNUSmgr and Setting Up the ETERNUS DX/AF
If ETERNUSmgr is to be used, install it and set up the ETERNUS DX/AF.
•"Chapter 4 Checking the Server Information" (page 13)
•"Chapter 5 Installing and Setting Up ETERNUSmgr" (page 14)
•"Chapter 6 Setting Up the ETERNUS DX/AF" (page 15)
•Checking the setup and maintenance operations
-"ETERNUS Web GUI User's Guide"
-"ETERNUSmgr Install Guide"
-"ETERNUSmgr User Guide"
•Setting up the ETERNUS DX/AF
-"Configuration Guide -Server Connection- Storage System Settings" that corresponds to the ETER-
NUS DX/AF to be connected
Installing the iSCSI Software Initiator and Setting Up the Server
Set up the OS to connect to the ETERNUS DX/AF.
•"Chapter 7 Installing the iSCSI Software Initiator and Setting Up the Server" (page 16)
Setting Up the Server to Recognize the Logical Units
Set up the server so that it can recognize the LUNs (logical unit numbers) of the ETERNUS DX/AF.
•"8.2 Setting Up the Server to Recognize the Logical Units" (page 23)
Configuring the System
Set up the server as required by the system configuration.
•Setting the multipaths
-"9.1 Enabling MPxIO" (page 24)
•Setting a file system
-"Chapter 10 Setting a File System" (page 26)
Chapter 1 Workflow
7
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (iSCSI) for Oracle Solaris
Copyright 2017 FUJITSU LIMITED
P3AM-4042-18ENZ0
Chapter 2
Checking the Server Environment
Connection to servers is possible in the following environments.
Check the "Server Support Matrix" for server environment conditions.
2.1 Hardware
Refer to the "Server Support Matrix".
2.2 OS (Operating System)
Refer to the "Server Support Matrix".
2.3 Network Interface Card
Refer to the "Server Support Matrix".
2.4 Multipath Configuration
Refer to the "Server Support Matrix".
8
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (iSCSI) for Oracle Solaris
Copyright 2017 FUJITSU LIMITED
P3AM-4042-18ENZ0
Chapter 3
Notes
Note the following issues when connecting the ETERNUS DX/AF to a server.
3.1 LAN Environment Notes
•The ETERNUS DX/AF can be connected to a server via an existing LAN. However, a decrease in LAN perform-
ance may be observed by prior users of said LAN.
•For the iSCSI LAN (used to transfer data), do not set multipath configuration with IP Network Multipathing
(IPMP).
•Since an iSCSI LAN handles large amounts of data (traffic volumes) like an FC-SAN, the iSCSI LAN must have
its own switch and be a dedicated LAN that is separate from the business LANs.
•For IP network security, separate the iSCSI LAN from the management LAN (for administration).
•The iSCSI LAN must be configured as a dedicated LAN for each path from a server to the ETERNUS DX/AF.
•A configuration where multiple LAN ports of a single server are connected to the same network may be
restricted depending on the OS and/or driver specifications. For a multipath connection, connect each path
using different LAN segments by separating the VLAN and so on.
9
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (iSCSI) for Oracle Solaris
Copyright 2017 FUJITSU LIMITED
P3AM-4042-18ENZ0
Example of a LAN switch connection configuration
Business server A
LAN
Card#2
LAN
Card#1
Business server B
LAN
Card#2
LAN
Card#1
Business server C
LAN
Card#2
LAN
Card#1
LAN
Card#3
LAN switch
[Business LAN]
LAN switch
[Management LAN]
ETERNUS DX/AF
12
1 2 3
10 11 12
LUN1 LUN2
10
2 3
11
LAN
Card#3
LAN
Card#3
1
LUN3 Management
LAN port
LAN switches should not
be inter-connected (*1)
A separate LAN segment is used for each
Server/Storage grouping (*2).
Here, LAN ports 1, 2 and 10 comprise VLAN1,
while LAN ports 3 and 11 comprise VLAN2.
The iSCSI LAN and management LAN
segments are kept separate in the iSCSI
LAN switches, helping maintain the security
of each.
Similarly to FC-SAN,
a dedicated LAN is used for iSCSI,
not the business LAN.
Business LAN
iSCSI LAN
Management LAN
LAN switch #1
[iSCSI LAN]
LAN switch #2
[iSCSI LAN]
*1: In this system configuration, multipaths provide redundant connections between the servers and stor-
age system. LAN switches #1 and #2 provide physical separation of the network paths.
*2: A separate LAN segment is provided in the LAN switch (using the switch VLAN function) for each group-
ing of business servers and storage systems (equivalent to the FC zones).
Chapter 3 Notes
3.1 LAN Environment Notes
10
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (iSCSI) for Oracle Solaris
Copyright 2017 FUJITSU LIMITED
P3AM-4042-18ENZ0
Autres manuels pour ETERNUS DX Disk
10
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Fujitsu Stockage
Fujitsu
Fujitsu MAX3036RC SERIES Manuel utilisateur
Fujitsu
Fujitsu ETERNUS LT260 Manuel utilisateur
Fujitsu
Fujitsu MPF3204AH Manuel utilisateur
Fujitsu
Fujitsu DynaMO 640FE Manuel utilisateur
Fujitsu
Fujitsu MAU3036NC/NP Manuel utilisateur
Fujitsu
Fujitsu Eternus DX500 S3 Guide d'installation
Fujitsu
Fujitsu MHT2060BH - Mobile 60 GB Hard Drive Manuel utilisateur
Fujitsu
Fujitsu GP5-HDH96 Manuel utilisateur
Fujitsu
Fujitsu M2488 Manuel utilisateur
Fujitsu
Fujitsu ETERNUS DX60 Manuel utilisateur
Fujitsu
Fujitsu MHT2020AT Manuel utilisateur
Fujitsu
Fujitsu MPD3XXXAH Manuel utilisateur
Fujitsu
Fujitsu MPG3409AT Manuel utilisateur
Fujitsu
Fujitsu ETERNUS2000 200 Mode d’emploi
Fujitsu
Fujitsu MAN3735 SERIES Manuel utilisateur
Fujitsu
Fujitsu MAV2036RC - 36.7 GB Hard Drive Manuel utilisateur
Fujitsu
Fujitsu ETERNUS DX60 S3 Manuel technique
Fujitsu
Fujitsu ETERNUS LT140 Manuel utilisateur
Fujitsu
Fujitsu MPB3021AT Manuel utilisateur
Fujitsu
Fujitsu Eternus DX80 S2 Manuel utilisateur
Manuels Stockage populaires d'autres marques
Spectra Logic
Spectra Logic T-Series Spectra T50e Manuel utilisateur
Panasonic
Panasonic LKM-F931-1 Manuel utilisateur
Tabernus
Tabernus Enterprise Erase E2400 Manuel utilisateur
Rocstor
Rocstor COMMANDER 3F series Manuel utilisateur
HP
HP P9000 Manuel utilisateur
Western Digital
Western Digital Ultrastar Data60 Manuel utilisateur