Fujitsu PRIMERGY TX600 S2 Manuel utilisateur

PRIMERGY

PRIMERGY TX600 S2

Server System

Options Guide

Joachim Pichol

Fujitsu Siemens Computers GmbH Paderborn

33094 Paderborn

e-mail: email: [email protected]

Tel.: (05251) 14888-18

Fax: (++49) 700 / 372 00001

U41612-J-Z156-2-76

Sprachen: En

Edition November 2005

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Fax forms for sending us your comments are included in

the back of the manual.

There you will also find the addresses of the relevant

User Documentation Department.

Certified documentation

according to DIN EN ISO 9001:2000

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2000.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

U41612-J-Z156-2-76 Options Guide

Contents

1 Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.1 Documentation overview . . . . . . . . . . . . . . . . . . . . . 1

1.2 Extensions and conversions . . . . . . . . . . . . . . . . . . . . 3

1.3 Notational conventions . . . . . . . . . . . . . . . . . . . . . . 5

2 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

3 Important notes . . . . . . . . . . . . . . . . . . . . . . . . . 9

3.1 Notes on safety . . . . . . . . . . . . . . . . . . . . . . . . . . 9

3.2 Environmental Protection . . . . . . . . . . . . . . . . . . . . 15

4 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

4.1 Opening the server . . . . . . . . . . . . . . . . . . . . . . . 19

4.1.1 Opening the rack model . . . . . . . . . . . . . . . . . . . . . 19

4.1.2 Opening the floor-standing model . . . . . . . . . . . . . . . . 21

5 Main memory . . . . . . . . . . . . . . . . . . . . . . . . . . 23

5.1 Fitting rules . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

5.2 Upgrading / exchanging main memory . . . . . . . . . . . . . 24

6 Processors . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

6.1 Installing additional processors . . . . . . . . . . . . . . . . . 29

6.2 Exchanging the processor . . . . . . . . . . . . . . . . . . . . 39

6.3 Changing to dual-core processors . . . . . . . . . . . . . . . 42

6.3.1 Hardware requirements . . . . . . . . . . . . . . . . . . . . . 42

6.3.2 Software requirements . . . . . . . . . . . . . . . . . . . . . 42

6.3.3 Processor requirements . . . . . . . . . . . . . . . . . . . . . 43

6.3.4 Tasks to be performed . . . . . . . . . . . . . . . . . . . . . . 43

7 Accessible drives . . . . . . . . . . . . . . . . . . . . . . . 45

7.1 Installing a CD/DVD drive . . . . . . . . . . . . . . . . . . . . 45

7.2 Installing a tape drive . . . . . . . . . . . . . . . . . . . . . . 49

8 Controllers in non-hot-plug PCI slots . . . . . . . . . . . . 55

8.1 Installing controllers . . . . . . . . . . . . . . . . . . . . . . . 55

9 RemoteView components . . . . . . . . . . . . . . . . . . . 57

9.1 Installing the RemoteView Service Board S2 LP . . . . . . . . 57

10 External SCSI connection . . . . . . . . . . . . . . . . . . . 61

10.1 Installing an external SCSI connection . . . . . . . . . . . . . 62

Options Guide U41612-J-Z156-2-76

Contents

11 Battery for the RoMB controller . . . . . . . . . . . . . . . . 65

11.1 Installing the battery (BBU) . . . . . . . . . . . . . . . . . . . 65

12 Completion . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

12.1 Closing the server . . . . . . . . . . . . . . . . . . . . . . . . 69

Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Related publications . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

U41612-J-Z156-2-76 Options Guide 1

1 Preface

The PRIMERGY TX600 S2 server is an Intel-based server for mid-size and

large companies. It is suitable for use as a file server as well as an application,

information, or Internet server.

The PRIMERGY TX600 S2 server offers a high degree of reliability and avail-

ability through highly developed hardware and software components. These

include hard disk drive modules, system fans, power supply units, PCI slots and

memory boards (all the components listed are hot-pluggable), as well as

“Prefailure Detection and Analyzing” (PDA), “Automatic Server Reconfiguration

and Restart” (ASR&R) and the ServerView server management software.

The server offers a whole host of configuration options but only uses six height

units (HU) in the 19-inch rack. It is available both as a rack and a floor-standing

model.

1.1 Documentation overview

IPRIMERGY manuals are available in PDF format on the ServerBooks

DVD, which is part of the ServerView Suite package provided with each

server system.

These PDF files can also be downloaded from the Internet free of

charge: At http://manuals.fujitsu-siemens.com you will find an overview

page showing the online documentation available on the Internet.

You can go to the PRIMERGY Server documentation by clicking on

“Intel-based Servers”.

Concept and target groups

This Options Guide shows you how to expand and upgrade your server.

VCaution!

The activities described in this manual may only be performed by

specialist personnel with technical training.

IThe installation and removal of the hot-plug components is described in

the operating manual supplied with the server.

2 Options Guide U41612-J-Z156-2-76

Documentation overview Preface

Additional server documentation

The PRIMERGY TX600 S2 documentation comprises the following additional

manuals:

– The Service Supplement for PRIMERGY TX600 S2 (PDF file available on

the ServerBooks DVD supplied)

– The Operating Manual for PRIMERGY TX600 S2 (PDF file available on the

ServerBooks DVD supplied)

– The Technical Manual for the system board D1651 (PDF file available on the

ServerBooks DVD supplied)

– The “D1651 BIOS Setup Utility” manual (PDF file available on the

ServerBooks DVD supplied)

– The “ServerView Suite” manual (printed copy always supplied with the

server, and available as a PDF file on the ServerBooks DVD supplied)

– The “WebBIOS Configuration Utility” (PDF file available on the ServerBooks

DVD supplied)

– The “Security” manual (printed copy always supplied with the server, and

available as a PDF file on the ServerBooks DVD supplied)

– The “Guarantee” manual (printed copy always supplied with the server, and

available as a PDF file on the ServerBooks DVD supplied)

– The “Ergonomics” manual (PDF file available on the ServerBooks DVD

supplied)

IYou can order a supplementary ServerBooks DVD by sending an e-mail to

the following address, quoting your server data:

Reklamat-PC-LOG@fujitsu-siemens.com

Further sources of information:

– Technical Manual for the relevant rack

– Manual for the monitor

– Manual on ServerView Server Management

– Manual on the RemoteView Remote Test and Diagnostics System

– Documentation for boards and drives

– Documentation for your operating system

– Information files on your operating system

(see also chapter “Related publications” on page 79)

U41612-J-Z156-2-76 Options Guide 3

Preface Extensions and conversions

1.2 Extensions and conversions

Additional processors

The system board can be upgraded to include up to four processors. You may

only use processors of the same type on the system board. All processors must

have the same frequency and cache size.

The system board can also be upgraded to dual-core processors.

Extension of the main memory

The system board offers slots for four hot-plug memory boards, each of which

can accommodate up to four memory modules (in two memory banks) The slots

are suitable for DDR II/400 MHz DIMM modules with 1 GB, 2 GB and 4 GB

capacity. The board supports a maximum memory configuration of 64GB.

Additional accessible drives

In addition to the existing CD/DVD drive, two tape drives are available as acces-

sible drives. The drives are installed in the server using module frames. The

bays for the tape drives are designed for 5.25 x 1.6-inch devices.

Additional controllers in non-hot-plug PCI slots

The system board has seven PCI slots:

●Slots 1-5 are hot-plug PCI slots which can be fitted with hot-pluggable

controllers (the hot-plug PCI slots are described in the operating manual).

●Slots 6 and 7 are 100 MHz non-hot-plug PCI slots and can be fitted with

boards with a maximum length of 315mm.

Additional external SCSI interface

If you want to connect additional external SCSI devices, one channel of the

onboard controller can be made available for connecting storage subsystems

via the external SCSI interface.

Battery (BBU) for the RoMB controller

An optional battery (battery backup unit = BBU) is available for the internal

RoMB controller to protect its memory contents in the event of a power failure.

4 Options Guide U41612-J-Z156-2-76

Extensions and conversions Preface

RemoteView

RemoteView is the remote-management solution for Intel-based PRIMERGY

systems from Fujitsu Siemens Computers. RemoteView and the associated

hardware components integrated on the system board allow remote monitoring

and servicing and fast recovery of the system in the event of an error.

RemoteView Service Board S2 LP

The RemoteView Service Board S2 “low profile” (RSB S2 LP) is a PCI board with

a completely independent system, i.e. it has its own operating system with Web

server and SNMP agents and can optionally be equipped with an external

power supply.

The RSB S2 LP is installed in a (non-hot plug) standard PCI slot and connected

to the system board with a cable.

The RSB S2 LP permits remote diagnosis for system analysis, remote system

configuration and remote restart even in the event of operating system failure or

hardware faults. It has its own LAN port which ensures that all the functions are

available.

U41612-J-Z156-2-76 Options Guide 5

Preface Notational conventions

1.3 Notational conventions

The following notational conventions are used in this manual:

Italics indicate commands, menu items or software programs.

“quotation marks” indicate names of chapters and terms that need to be

emphasized.

Êindicates an activity that must be performed.

VATTENTION! indicates that, if you ignore the information given at this

point, your health, the correct functioning of your

system or the security of your data may be at risk.

Iindicates supplementary information, remarks and tips.

Table 1: Notational conventions

Table des matières

Autres manuels Fujitsu Serveur

Fujitsu

Fujitsu PRIMERGY BX620 S4 Manuel utilisateur

Fujitsu

Fujitsu SPARC Enterprise T5140 Guide d'installation

Fujitsu

Fujitsu PRIMERGY RX100 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY RX2540 M5 Manuel utilisateur

Fujitsu

Fujitsu SPARC Enterprise M4000 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY RX2510 M2 Manuel utilisateur

Fujitsu

Fujitsu SPARC M12-1 Manuel utilisateur

Fujitsu

Fujitsu SPARC Enterprise T5440 Server Instructions de montage

Fujitsu

Fujitsu SPARC ENTERPRISE T5220 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY TX120 S3 Manuel utilisateur

Fujitsu

Fujitsu HX2560 M1 Manuel utilisateur

Fujitsu

Fujitsu SPARC Enterprise M3000 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY RX600 S6 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY RX1330 M3 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY RX2520 M4 Manuel utilisateur

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Manuel de service

Fujitsu

Fujitsu SPARC Enterprise T5440 Server Guide d'installation

Fujitsu

Fujitsu SPARC Enterprise T5440 Server Manuel technique

Fujitsu

Fujitsu PRIMERGY TX150 S6 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY RX2530 M6 Manuel utilisateur

Fujitsu

Fujitsu SPARC Enterprise T5140 Manuel utilisateur

Fujitsu

Fujitsu Primergy TX120 Manuel utilisateur

Fujitsu

Fujitsu FW-S Series SERVIS Manuel utilisateur

Fujitsu

Fujitsu Primergy RX600 Mode d’emploi

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur