Fujitsu PRIMERGY RX600 S3 Manuel du propriétaire
PRIMERGY
PRIMERGY RX600 S3 SAS Server
Service Supplement
Joachim Pichol
Fujitsu Siemens Computers GmbH Paderborn
33094 Paderborn
Tel.: (05251) 148 88-18
Fax: 0 700 / 372 000 01
Sprachen: En
Edition February 2007
Comments…Suggestions…Corrections…
The User Documentation Department would like to
know your opinion of this manual. Your feedback helps
us optimize our documentation to suit your individual
needs.
Feel free to send us your comments by e-mail to
Certified documentation
according to DIN EN ISO 9001:2000
To ensure a consistently high quality standard and
user-friendliness, this documentation was created to
meet the regulations of a quality management system
which complies with the requirements of the standard
DIN EN ISO 9001:2000.
cognitas. Gesellschaft für Technik-Dokumentation mbH
www.cognitas.de
Copyright and Trademarks
© cognitas. Gesellschft für Technik-Dokumentation mbH 2007 Pfad: D:\Aktuelles_Projekt\PRIMERGY\RX600S3-SAS\Supplement\EN\RX600S3-SAS_suppl_us.vor
Copyright © 2007 Fujitsu Siemens Computers GmbH.
All rights reserved.
Delivery subject to availability; right of technical modifications reserved.
All hardware and software names used are trademarks of their respective manufacturers.
Service Supplement RX600 S3 SAS
Contents
1 Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.1 Documentation overview . . . . . . . . . . . . . . . . . . . . 5
1.2 Notational conventions . . . . . . . . . . . . . . . . . . . . . 7
2 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3 Important notes . . . . . . . . . . . . . . . . . . . . . . . . . 11
3.1 Notes on safety . . . . . . . . . . . . . . . . . . . . . . . . . 11
3.2 Environmental protection . . . . . . . . . . . . . . . . . . . 17
4 Replacement routines . . . . . . . . . . . . . . . . . . . . . 21
4.1 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
4.2 Opening/closing the server . . . . . . . . . . . . . . . . . . 22
4.3 Removing/inserting the processor cover . . . . . . . . . . . 24
4.4 Replacing the LocalView module . . . . . . . . . . . . . . . 27
4.5 Replacing the BMC board . . . . . . . . . . . . . . . . . . . 29
4.6 Replacing the control panel . . . . . . . . . . . . . . . . . . 31
4.7 Replacing the control panel board . . . . . . . . . . . . . . 32
4.8 Replacing the chassis ID module . . . . . . . . . . . . . . . 33
4.9 Replacing the SAS backplane . . . . . . . . . . . . . . . . . 35
4.10 Replacing RoMB components . . . . . . . . . . . . . . . . . 38
4.11 Replacing the system board . . . . . . . . . . . . . . . . . . 39
4.12 Replacing the power backplane . . . . . . . . . . . . . . . . 42
5 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
5.1 Control panel board . . . . . . . . . . . . . . . . . . . . . . 43
Service Supplement RX600 S3 SAS
Contents
© cognitas. Gesellschft für Technik-Dokumentation mbH 2007 Pfad: D:\Aktuelles_Projekt\PRIMERGY\RX600S3-SAS\Supplement\EN\RX600S3-SAS_suppl_us.ivz
5.2 Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . 44
5.3 BMC board . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
5.4 SAS backplane . . . . . . . . . . . . . . . . . . . . . . . . . . 46
5.5 Power backplane . . . . . . . . . . . . . . . . . . . . . . . . 48
6 Cable connections . . . . . . . . . . . . . . . . . . . . . . . . 49
6.1 Cable overview . . . . . . . . . . . . . . . . . . . . . . . . . . 49
6.2 Cable plans . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Service Supplement RX600 S3 SAS 5
1 Preface
The PRIMERGY RX600 S3 SAS server is an Intel-based server for mid-size
applications in server farms. It is suitable for front-end services as well as for use
as an application, e-mail, or Internet server.
The server is used exclusively as a rack model. It offers a whole host of config-
uration options but only uses four height units (HU) in the 19-inch rack.
1.1 Documentation overview
Concept and target groups
This Service Supplement supplements the information contained in the
Operating Manual, the Options Guide and the Technical Manual for the system
board.
VATTENTION!
The activities described in this manual should only be performed by
specialist personnel with technical training.
IThe installation and removal of the hot-plug components is described in
the Operating Manual supplied with the server.
Service DVD
A service DVD is available for service partners of Fujitsu Siemens Computers.
This DVD contains the following manuals in PDF format:
– the Operating Manual for PRIMERGY RX600 S3 SAS
– the Options Guide for PRIMERGY RX600 S3 SAS
– the Technical Manual for the system board D2630
– the “D2630 BIOS Setup Utility” manual
– the “Ergonomics” manual
– the “Safety notes and other important information” manual
IThese PDF files can also be downloaded from the Internet free of
charge: At http://manuals.fujitsu-siemens.com you will find an overview
page showing the online documentation available on the Internet. You
can go to the PRIMERGY Server documentation by clicking on industry
standard servers.
6 Service Supplement RX600 S3 SAS
Documentation overview Preface
© cognitas. Gesellschft für Technik-Dokumentation mbH 2007 Pfad: D:\Aktuelles_Projekt\PRIMERGY\RX600S3-SAS\Supplement\EN\RX600S3-SAS_suppl_us.k01
Information/Activity Manual
Features and technical data of the server Operating Manual
Installation and initial operation, such as:
– external connections to the server
– operation
– configuring the server
– installing the rack mounting kit
Troubleshooting
Installing/removing all hot-plug components:
– hot-plug power supply units
– hot-plug HDD modules
– hot-plug memory boards etc.
Extensions and conversions:
– expanding/replacing RAM modules
– installing additional processors/replacing
processors
– installing accessible drives
– installing controllers in non-hot-plug PCI
slots
– installing RemoteView components
Options Guide
Replacement routines:
– replacing the LocalView module
– replacing the BMC board
– replacing the control panel
– replacing the control panel board
– replacing a chassis ID board
– replacing the SAS backplane
– replacing RoMB components
– replacing the system board
– replacing the power backplane
Service Supplement
Settings
Cable connections
Table 1: Overview of the RX600 S3 SAS documentation (part 1 of 2)
Service Supplement RX600 S3 SAS 7
Preface Notational conventions
1.2 Notational conventions
The following notational conventions are used in this manual:
Information on the system board:
– features of the system board
– connector assignment
– jumper settings
– replacing the battery
Technical Manual
BIOS settings BIOS Setup Utility
Detailed safety information Manual “Safety notes and
other important information”
Italics indicate commands, menu items or software programs.
“quotation marks” indicate names of chapters and terms that need to be
emphasized.
Êindicates an activity that must be performed.
VATTENTION! indicates that, if you ignore the information given at this
point, your health, the correct functioning of your
system or the security of your data may be at risk.
Iindicates supplementary information, remarks and tips.
Table 2: Notational conventions
Information/Activity Manual
Table 1: Overview of the RX600 S3 SAS documentation (part 2 of 2)
© cognitas. Gesellschft für Technik-Dokumentation mbH 2007 Pfad: D:\Aktuelles_Projekt\PRIMERGY\RX600S3-SAS\Supplement\EN\RX600S3-SAS_suppl_us.k01
Service Supplement RX600 S3 SAS 9
2Procedure
VATTENTION!
The activities described in this manual should only be performed by
engineers, service personnel or technical specialists.
ÊFirst of all please familiarize yourself with the safety instructions in the
chapter “Important notes” on page 11ff.
ÊMake sure that all the manuals you need (see service DVD) are available,
printing out the PDF files if necessary. You will definitely need the Operating
Manual for the server, the Options Guide for the server, and the Technical
Manual for the system board.
ÊShut down the server correctly, switch it off, pull out the power plugs, and
open the server as described in the chapter “Replacement routines” on
page 21ff.
ÊReplace the defective component as described in the relevant chapter.
ÊClose the server.
ÊConnect the cables to the server.1
ÊConnect the server to the mains.1
ÊStart the operating system.1
ÊIf necessary, configure the operating system as required.1
1These procedures are described in the Operating Manual.
© cognitas. Gesellschft für Technik-Dokumentation mbH 2007 Pfad: D:\Aktuelles_Projekt\PRIMERGY\RX600S3-SAS\Supplement\EN\RX600S3-SAS_suppl_us.k02
Autres manuels pour PRIMERGY RX600 S3
5
Table des matières
Autres manuels Fujitsu Serveur
Fujitsu
Fujitsu PRIMERGY TX1330 M2 Manuel utilisateur
Fujitsu
Fujitsu PRIMERGY ServerView Suite Manuel utilisateur
Fujitsu
Fujitsu PRIMERGY TX200FT S2 Mode d’emploi
Fujitsu
Fujitsu FW-S Series SERVIS Manuel utilisateur
Fujitsu
Fujitsu 1FINITY L100 Manuel utilisateur
Fujitsu
Fujitsu SPARC Enterprise M5000 Guide d'installation
Fujitsu
Fujitsu PRIMERGY TX200 S2 Mode d’emploi
Fujitsu
Fujitsu 1PRIMERGY RX600 S4 Manuel utilisateur
Fujitsu
Fujitsu 2737 Manuel utilisateur
Fujitsu
Fujitsu SE310 Manuel utilisateur
Fujitsu
Fujitsu primergy h250 Manuel utilisateur
Fujitsu
Fujitsu BS2000 SE Series Manuel utilisateur
Fujitsu
Fujitsu PRIMERGY RX220 Manuel utilisateur
Fujitsu
Fujitsu PRIMERGY TX150 S3 Manuel utilisateur
Fujitsu
Fujitsu PRIMERGY BX900 S1 Manuel utilisateur
Fujitsu
Fujitsu PRIMERGY RX900 S2 Manuel utilisateur
Fujitsu
Fujitsu SPARC Enterprise T5120 Manuel de service
Fujitsu
Fujitsu SPARC M10-4 Manuel utilisateur
Fujitsu
Fujitsu PRIMERGY TX300 S3 Manuel utilisateur
Fujitsu
Fujitsu PRIMERGY RX600 S5 Manuel utilisateur
