Fujitsu PRIMERGY RX300 S6 Manuel utilisateur

Options Guide - English

PRIMERGY RX300 S6

Server

Options Guide

Edition October 2012

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Feel free to send us your comments by e-mail to

email: [email protected].

Certified documentation

according to DIN EN ISO 9001:2008

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2008.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

– The contents of this manual may be revised without prior notice.

– Fujitsu assumes no liability for damages to third party copyrights or other

rights arising from the use of any information in this manual.

– No part of this manual may be reproduced in any form without the prior written

permission of Fujitsu.

Microsoft, Windows, Windows Server, and Hyper V are trademarks or registered trademarks of

Microsoft Corporation in the USA and other countries.

Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries

in the USA and other countries.

RX300 S6 Options Guide

Before reading this manual

For your safety

This manual contains important information for safely and correctly using this

product.

Carefully read the manual before using this product. Pay particular attention to

the accompanying manual "Safety Notes and Regulations" and ensure these

safety notes are understood before using the product. Keep this manual and the

manual "Safety Notes and Regulations" in a safe place for easy reference while

using this product.

Radio interference

This product is a "Class A" ITE (Information Technology Equipment). In a

domestic environment this product may cause radio interference, in which case

the user may be required to take appropriate measures. VCCI-A

Aluminum electrolytic capacitors

The aluminum electrolytic capacitors used in the product's printed circuit board

assemblies and in the mouse and keyboard are limited-life components. Use of

these components beyond their operating life may result in electrolyte leakage

or depletion, potentially causing emission of foul odor or smoke.

As a guideline, in a normal office environment (25°C) operating life is not

expected to be reached within the maintenance support period (5 years).

However, operating life may be reached more quickly if, for example, the

product is used in a hot environment. The customer shall bear the cost of

replacing replaceable components which have exceeded their operating life.

Note that these are only guidelines, and do not constitute a guarantee of

trouble-free operation during the maintenance support period.

High safety use

This product has been designed and manufactured to be used in commercial

and/or industrial areas as a server.

When used as visual display workplace, it must not be placed in the direct field

of view to avoid incommoding reflections (applies only to TX server systems).

The device has not been designed or manufactured for uses which demand an

extremely high level of safety and carry a direct and serious risk of life or body

if such safety cannot be assured.

Options Guide RX300 S6

These uses include control of nuclear reactions in nuclear power plants,

automatic airplane flight control, air traffic control, traffic control in mass

transport systems, medical devices for life support, and missile guidance

control in weapons systems (hereafter, "high safety use"). Customers should

not use this product for high safety use unless measures are in place for

ensuring the level of safety demanded of such use. Please consult the sales

staff of Fujitsu if intending to use this product for high safety use.

Measures against momentary voltage drop

This product may be affected by a momentary voltage drop in the power supply

caused by lightning. To prevent a momentary voltage drop, use of an AC

uninterruptible power supply is recommended.

(This notice follows the guidelines of Voltage Dip Immunity of Personal

Computer issued by JEITA, the Japan Electronics and Information Technology

Industries Association.)

Technology controlled by the Foreign Exchange and Foreign Trade

Control Law of Japan

Documents produced by Fujitsu may contain technology controlled by the

Foreign Exchange and Foreign Trade Control Law of Japan. Documents which

contain such technology should not be exported from Japan or transferred to

non-residents of Japan without first obtaining authorization in accordance with

the above law.

Harmonic Current Standards

This product conforms to harmonic current standard JIS C 61000-3-2.

Only for the Japanese market:

About SATA hard disk drives

The SATA version of this server supports hard disk drives with SATA / BC-SATA

storage interfaces. Please note that the usage and operation conditions differ

depending on the type of hard disk drive used.

Please refer to the following internet address for further information on the

usage and operation conditions of each available type of hard disk drive:

http://primeserver.fujitsu.com/primergy/harddisk/

RX300 S6 Options Guide

Only for the Japanese market:

IAlthough described in this manual, some sections do not apply to the

Japanese market. These options and routines include:

– USB Flash Module (UFM)

– Trusted Platform Module (TPM)

Options Guide RX300 S6

RX300 S6 Options Guide

Content

1 Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

1.1 Concept and target groups . . . . . . . . . . . . . . . . . . 12

1.2 Documentation overview . . . . . . . . . . . . . . . . . . . 12

1.3 Expansions and conversions . . . . . . . . . . . . . . . . . 14

1.4 Notational conventions . . . . . . . . . . . . . . . . . . . . 16

2 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

3 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . 19

4 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

4.1 Removing the server from the rack . . . . . . . . . . . . . . 28

4.2 Opening the server . . . . . . . . . . . . . . . . . . . . . . . 29

4.3 Removing the air duct . . . . . . . . . . . . . . . . . . . . . 30

4.4 Removing the fan box . . . . . . . . . . . . . . . . . . . . . 31

4.5 Removing the power supply cage . . . . . . . . . . . . . . . 32

5 Main memory . . . . . . . . . . . . . . . . . . . . . . . . . . 35

5.1 Population rules . . . . . . . . . . . . . . . . . . . . . . . . 36

5.2 Expanding the main memory . . . . . . . . . . . . . . . . . 38

6 Processors . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

6.1 Installing a second processor . . . . . . . . . . . . . . . . . 42

6.2 Replacing the processor . . . . . . . . . . . . . . . . . . . . 49

6.3 Replacing the heat sink . . . . . . . . . . . . . . . . . . . . 52

Options Guide RX300 S6

Content

7 Accessible drives and LSP/LSD . . . . . . . . . . . . . . . . 55

7.1 Installing LSP or LSD . . . . . . . . . . . . . . . . . . . . . . 56

7.2 Installing an optical drive . . . . . . . . . . . . . . . . . . . . 61

7.3 USB tape drive/USB RDX drive . . . . . . . . . . . . . . . . . 66

7.3.1 Installing a USB drive in a 6x 3.5" variant . . . . . . . . . . . . . 66

7.3.1.1 Installing a USB drive in a drive cage . . . . . . . . . . . . . 66

7.3.1.2 Installing a USB drive . . . . . . . . . . . . . . . . . . . . . 69

7.3.2 Installing a USB drive in the 8x 2.5" variant . . . . . . . . . . . . 78

7.3.2.1 Installing a USB drive . . . . . . . . . . . . . . . . . . . . . 78

7.3.2.2 Connecting a USB drive . . . . . . . . . . . . . . . . . . . . 81

8 Expansion cards and BBU . . . . . . . . . . . . . . . . . . . 89

8.1 Installing expansion cards . . . . . . . . . . . . . . . . . . . 90

8.2 Upgrading a SAS/SATA RAID controller . . . . . . . . . . . . 91

8.3 Installing a BBU . . . . . . . . . . . . . . . . . . . . . . . . . 95

9 Further options . . . . . . . . . . . . . . . . . . . . . . . . 105

9.1 T-handles . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105

9.2 Front video connector (VGA) . . . . . . . . . . . . . . . . . 106

9.3 TPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

9.4 USB Flash Module (UFM) . . . . . . . . . . . . . . . . . . . 114

10 Completion . . . . . . . . . . . . . . . . . . . . . . . . . . . 117

10.1 Installing a fan box . . . . . . . . . . . . . . . . . . . . . . 117

10.2 Installing a power supply cage . . . . . . . . . . . . . . . . 118

10.3 Inserting the air duct . . . . . . . . . . . . . . . . . . . . . 120

10.4 Closing the server . . . . . . . . . . . . . . . . . . . . . . . 121

10.5 Installing the server in the rack . . . . . . . . . . . . . . . . 122

RX300 S6 Options Guide

Conten

11 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125

11.1 Cable list . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125

11.2 Cabling plans . . . . . . . . . . . . . . . . . . . . . . . . . . 127

11.3 Configuration schema . . . . . . . . . . . . . . . . . . . . . 132

Options Guide RX300 S6

Content

Autres manuels pour PRIMERGY RX300 S6

Table des matières

Autres manuels Fujitsu Serveur

Fujitsu

Fujitsu SPARC M10-4 Manuel utilisateur

Fujitsu

Fujitsu SPARC Enterprise M3000 Manuel de service

Fujitsu

Fujitsu PRIMERGY CX400 M4 Manuel utilisateur

Fujitsu

Fujitsu Primergy TX300 S4 Manuel utilisateur

Fujitsu

Fujitsu SPARC Enterprise M4000 Manuel utilisateur

Fujitsu

Fujitsu ETERNUS LT160 Manuel utilisateur

Fujitsu

Fujitsu PRIMEQUEST 580A Manuel technique

Fujitsu

Fujitsu PRIMERGY TX1310 M3 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY BX924 S3 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY BX900 S1 Manuel utilisateur

Fujitsu

Fujitsu T1323SC010IN Manuel utilisateur

Fujitsu

Fujitsu FUTRO S700 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY RX100 S7 Manuel utilisateur

Fujitsu

Fujitsu SPARC Enterprise M8000 Guide d'installation

Fujitsu

Fujitsu Primergy BX620 S2 Guide rapide

Fujitsu

Fujitsu SPARC Enterprise T5440 Server Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY RX800 S2 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY RX2530 M1 Manuel utilisateur

Fujitsu

Fujitsu FUTRO S450 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY RX200 S3 Mode d’emploi

Fujitsu

Fujitsu Primergy TX300 S4 Manuel utilisateur

Fujitsu

Fujitsu Primergy RX600 S2 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY CX122 S1 Manuel du propriétaire

Fujitsu

Fujitsu SPARC Enterprise M4000 Fiche technique

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur