Front Runner SSDR005 Manuel utilisateur

Universal Drawer

Medium SUV

SSDR005

ENG

Thank you for purchasing Front Runner Universal Drawers System.

Before you start, take a moment to familiarize yourself with the Fitting Instructions and the components received.

Refer to Page 2 for a list of all the components, quantities and tools required.

READ ME !

IMPORTANT WARNING!

IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD

RESULT IN AN AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT

RUNNER PRODUCTS TO YOUR VEHICLE, CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND

DAMAGE. THEREFORE, YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO

INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY

FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.

NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.

Please call us if you have any questions about the installation of this product.

TOOLS NEEDED

10MM 10MM

1 1 X Universal Drawer Medium SUV

2 X Set Of Keys

2 6 X Eye Nut

3 6 X M8 Nylon Washer

4 6 X Stud Plate

5 4 X Carabiner Hook 60mm

6 4 X M6 Wing Nut

7 4 X Turnbuckle

8 4 X M6 x 20 Hex Bolt

9 8 X M6 x 19 x 1SS Flat Washer

10 8 X M8 D-Ring

11 4 X M6 Nyloc Nut

12 4 X M8 x 16 x 1.6 Flat Washer

13 4 X M8 x 16 Hex Bolt

FIGURE 1.1

GET ORGANIZED

IN THE BOX

6.5MM

FIT AND SECURE

2.1

2.2

2.3

Assemble each of the 4

turnbuckles (Item 7) with a wing nut

(Item 6) as shown. The wing nut will be

used to lock the Turnbuckles after they

have been set.

Place the Drawer System in the vehicle

and center it. Make sure the Turnbuckles

will be pulling outward to the existing

mounting points in the vehicle to prevent

it from moving after it has been secured.

If your vehicle does not have Tie-Down

points you can use the D-Rings (Item 10)

supplied.

Position the D-Rings so that the

Turnbuckles will pull outward to prevent

the Drawer System from moving after it

has been secured.

Mark the position of the D-Rings and drill

6.5mm holes.

Secure the D-Rings using M6 x 20 Hex

Bolts, M6 x 19 x 1SS Flat Washers and M6

Nyloc Nuts (Items 8, 9 & 11)

10MM

6.5MM

FIT AND SECURE

2.4

2.5

Connect the 60mm Laser Cut Carabiner

(Item 5) onto the D-rings on the drawers

upright.

Connect the Turnbuckles (Item 6) on the

other side of the 60mm Laser Cut Carabiner

and hook it into the existing tie-downs that

are ﬁtted to the vehicle.

Secure the drawer by tensioning the

Turnbuckles until there is no more

movement on the drawer. Make sure the

drawer stays in position when doing this.

Lock the Turnbuckles with the wing nuts.

Do this by tightening the wing nuts up to

the turnbuckles.

Assemble the Eye-Nuts with a M6 Nylon

Washer and a Stud Plate

(Items 2, 3 & 4) and slide them into the

extrusion.

INSTALL OTHER VEHICLE AND RACK ACCESSORIES

Now's the time to visit your favorite Front Runner Dealer in person or Online.

Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.

Please call us if you have any questions about the installation of this product.

Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters #BornToRoam

Share your adventures on:

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Front Runner Accessoires automobiles

Front Runner

Front Runner LATF002 Manuel utilisateur

Front Runner

Front Runner RRAC210 Manuel utilisateur

Front Runner

Front Runner LASS026 Manuel utilisateur

Front Runner

Front Runner KRTT950T Manuel utilisateur

Front Runner

Front Runner PBTT002 Manuel utilisateur

Front Runner

Front Runner 200 Series Manuel utilisateur

Front Runner

Front Runner LALD004 Manuel utilisateur

Front Runner

Front Runner SLIMPRO KVXS006 Manuel

Front Runner

Front Runner KRTL015L Mode d’emploi

Front Runner

Front Runner GWTL101-2 Manuel utilisateur

Front Runner

Front Runner LADD007 Manuel utilisateur

Front Runner

Front Runner SSDS111 Manuel utilisateur

Front Runner

Front Runner PRO UNDER RACK TABLE bracket Manuel utilisateur

Front Runner

Front Runner LALD006 Manuel utilisateur

Front Runner

Front Runner SLIMLINE II TRAY Manuel utilisateur

Front Runner

Front Runner SSDR003 Manuel utilisateur

Front Runner

Front Runner SSDS110 Manuel utilisateur

Front Runner

Front Runner SlimSport KSFR002 Manuel utilisateur

Front Runner

Front Runner FSLI021 Manuel utilisateur

Front Runner

Front Runner FAJL002 Manuel utilisateur

Front Runner

Front Runner SLIMLINE II KRFE009T Manuel

Front Runner

Front Runner FATT002 Manuel utilisateur

Front Runner

Front Runner SLIMLINE II KRSO004T Manuel

Front Runner

Front Runner SSDS115 Manuel utilisateur

Manuels Accessoires automobiles populaires d'autres marques

James Baroud

James Baroud Odyssey Manuel utilisateur

Motorola

Motorola i50sx Manuel utilisateur

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manuel utilisateur

Feniex

Feniex T3 Manuel utilisateur

Renault

Renault 77 11 423 180 Manuel utilisateur

Kia

Kia E8300-4D000 Manuel utilisateur

Brink

Brink 756843 Manuel utilisateur

Whispbar

Whispbar K085W Manuel utilisateur

v.link

v.link CI-VL2-PC-HSD Manuel utilisateur

Viking

Viking Stack-Rack Guide de configuration rapide

Aries

Aries 203015 Manuel utilisateur

Choetech

Choetech AT0005 Manuel utilisateur

ZZ2

ZZ2 ZZAIR-PRO Manuel utilisateur

Holman

Holman 4A80L Manuel utilisateur

Thule

Thule 2075 Manuel utilisateur

Motorola

Motorola T325 Manuel utilisateur

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guide d'installation

DV8

DV8 FBJL-02 Manuel utilisateur