Front Runner Pro Water Tank with Strap Manuel utilisateur

WTAN063

ENG

Pro Water Tank with Strap

/42L -by Front Runner

Thank you for purchasing a Front Runner Pro Water Tank with Strap / 42L.

Before you start, take a moment to familiarize yourself with the Fitting Instructions and the components received.

Refer to Page 2 for a list of all the components, quantities and tools required.

READ ME !

IMPORTANT WARNING!

IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD

RESULT IN AN AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT

RUNNER PRODUCTS TO YOUR VEHICLE, CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND

DAMAGE. THEREFORE, YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO

INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY

FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.

NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.

Please call us if you have any questions about the installation of this product.

WTAN063_REV_A01

TOOLS NEEDED

13mm

24mm

1 1 X Pro Tank Strap Assembly

2 1 X Side Proﬁle Catch

3 1 X M8 x 20 Button head

4 4 X M8 Nyloc Nut

5 3 X M8 x 16 Hex Bolt

6 3 X M8 Nut Cap

7 1 X 550mm T-Slot Rubber

8 1 X Slat Catch

9 1 X 42L Tank

IN THE BOX

FIGURE 1.1

5mm

Craft Knife

Thread Tape

GET ORGANIZED

Torx

T30

WTAN063_REV_A01

FIT AND SECURE

Cut the T-Slot Rubber (Item 7) into two equal

lengths before inserting it into the slats

T-slot as shown.

2.1

2.2

2.3

Slide the M8 x 16 Hex Bolt (Item 5) into the

3rd slats machined slot as shown.

Choose where you would like to mount your

Pro Water Tank, on your Front Runner Rack.

Slide one M8 Nyloc Nut (Item 4) into the

chosen Combined Slats T-slot.

Loosely ﬁt the Catch (Item 2) using the

M8 Nyloc and a M8 x 20 Button Head Bolt

(Item 3) as shown.

SLII SIDE PROFILE FITMENT

5mm

WTAN063_REV_A01

FIT AND SECURE

If you are ﬁtting the tap apply thread tape to

the thread of the tap.

This will allow the Tap to be aligned to your

chosen position and have a water tight seal.

Sold Seperately

Tap - WTAN059

2.4

2.5

2.6

Open the Strap and place the Pro Water Tank

onto the rack. Close the Strap over the

Water Tank as shown.

Ensure that the Tank and the Strap are

aligned before fully tightening the M8 Nyloc

on the Strap and the M8 x 20

Button Head Bolt on the Catch (Item 2).

Once secured, place a M8 Nut Cap

(Item 6) over the Nyloc Nut.

Loosely ﬁt the Pro Tank Strap (Item 1) to the

rack using the M8 x 16 Hex Bolt From 2.2 and

M8 Nyloc Nut (Item 4) as shown.

24MM

13mm

SLII SIDE PROFILE FITMENT

WTAN063_REV_A01

FIT AND SECURE

Slide the M8 x 16 Hex Bolt (Item 5) into the

3rd slat as shown.

3.1

3.2

3.3

Choose where you would like to mount your

Pro Water Tank Bracket.

Remove the Self Forming Screws as shown,

lift the slat and slide two M8x20 Hex Bolts in

the bottom T-Slot. Assemble the Bracket as

shown using M8 Nyloc Nut.

Choose where you would like to mount your

Pro Water Tank Bracket.

Slide the M8 x 16 Hex Bolt (Item 5) into the

bottom of the slats machined slot and loosely

assembly the Slat Catch (Item 8) using M8

Nyloc Nuts(Items 4). assemble theSide Proﬁle

Catch onto the Slat Catch using a M8x20

Button Head and M8 Nyloc Nut

(Items 2, 3 & 4).

SLII SLAT FITMENT

SLIM SPORT RACK FITMENT

5mm

Torx

T30

13mm

5mm

WTAN063_REV_A01

FIT AND SECURE

Open the Strap and place the Pro Water Tank

onto the rack. Close the Strap over the

Water Tank as shown.

Ensure that the Tank and the Strap are

aligned before fully tightening the M8 Nyloc

on the Strap and the M8 x 20

Button Head Bolt on the Catch (Item 2).

Once secured, place a M8 Nut Cap

(Item 6) over the Nyloc Nut.

3.4

3.5

3.6

Loosely ﬁt the Pro Tank Strap (Item 1) to the

rack using the M8 x 16 Hex Bolt From 3.2 and

M8 Nyloc Nut (Item 4) as shown.

Cut the T-Slot Rubber (Item 7) into two equal

lengths before inserting it into the slats

T-slot as shown.

13MM

13mm

SLII SLAT FITMENT

INSTALL OTHER VEHICLE AND RACK ACCESSORIES

Now's the time to visit your favorite Front Runner Dealer in person or online.

Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters #BornToRoam

Share your adventures on:

FINISH

Congratulations! You did it. Take a step back and admire your work!

WTAN063_REV_A01

FIT AND SECURE (SLIMSPORT RACK)

3.7

If you are ﬁtting the tap apply thread tape to

the thread of the tap.

This will allow the Tap to be aligned to your

chosen position and have a water tight seal.

Sold Seperately

Tap - WTAN059

Pro Water Tank / 42L - WTAN062

24MM

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Front Runner Accessoires automobiles

Front Runner

Front Runner SSDS126 Manuel utilisateur

Front Runner

Front Runner SSDR002 Manuel utilisateur

Front Runner

Front Runner KRTT950T Manuel utilisateur

Front Runner

Front Runner LATF001 Manuel utilisateur

Front Runner

Front Runner TBMK011 Mode d’emploi

Front Runner

Front Runner BPTH007 Manuel utilisateur

Front Runner

Front Runner FSLI021 Manuel utilisateur

Front Runner

Front Runner KRJW021T Manuel utilisateur

Front Runner

Front Runner SSDS111 Manuel utilisateur

Front Runner

Front Runner LALD006 Manuel utilisateur

Front Runner

Front Runner TBRA039 Manuel utilisateur

Front Runner

Front Runner KSVT001 Manuel utilisateur

Front Runner

Front Runner Slimline II KRVA002T Manuel utilisateur

Front Runner

Front Runner RRAC105 Manuel utilisateur

Front Runner

Front Runner FAJK009 Manuel utilisateur

Front Runner

Front Runner SSDR012 Manuel utilisateur

Front Runner

Front Runner FAJK010 Manuel

Front Runner

Front Runner SHOWER ARM MKII Manuel utilisateur

Front Runner

Front Runner TRCA008 Manuel utilisateur

Front Runner

Front Runner FSLI023 Manuel utilisateur

Front Runner

Front Runner SSDR003 Manuel utilisateur

Front Runner

Front Runner KRTT001T Manuel utilisateur

Front Runner

Front Runner KRRK001T Mode d’emploi

Front Runner

Front Runner SSDR005 Manuel utilisateur

Manuels Accessoires automobiles populaires d'autres marques

James Baroud

James Baroud Odyssey Manuel utilisateur

Motorola

Motorola i50sx Manuel utilisateur

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manuel utilisateur

Feniex

Feniex T3 Manuel utilisateur

Renault

Renault 77 11 423 180 Manuel utilisateur

Kia

Kia E8300-4D000 Manuel utilisateur

Brink

Brink 756843 Manuel utilisateur

Whispbar

Whispbar K085W Manuel utilisateur

v.link

v.link CI-VL2-PC-HSD Manuel utilisateur

Viking

Viking Stack-Rack Guide de configuration rapide

Aries

Aries 203015 Manuel utilisateur

Choetech

Choetech AT0005 Manuel utilisateur

ZZ2

ZZ2 ZZAIR-PRO Manuel utilisateur

Holman

Holman 4A80L Manuel utilisateur

Thule

Thule 2075 Manuel utilisateur

Motorola

Motorola T325 Manuel utilisateur

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guide d'installation

DV8

DV8 FBJL-02 Manuel utilisateur