FLIR MR160 Manuel utilisateur

USER MANUAL

FLIR MODEL MR160

IMAGING MOISTURE METER with IGM™

FLIR MR160 USER MANUAL Document Identifier: MR160-en-US_AF

Table of Contents

1. DISCLAIMERS 4

1.1 Copyright 4

1.2 Quality Assurance 4

1.3 Documentation 4

1.4 Disposal of Electronic Waste 4

2. SAFETY 5

2.1 Safety Notes 5

2.2 Laser Safety 5

3. INTRODUCTION 6

3.1 Key Features 6

4. METER AND MENU ICON DESCRIPTIONS 7

4.1 Meter Parts 7

4.2 Control Buttons 8

4.3 Menu Map and Overview 9

5. OPERATION 10

5.1 Powering the Meter 10

5.1.1 Auto Power OFF (APO) 10

5.2 Moisture Measurements 10

5.2.1 Moisture Measurement Overview 10

5.2.2 Moisture Displays Overview 11

5.2.3 IMAGE Modes 12

5.2.4 MOISTURE Modes 13

5.2.5 Internal Moisture Sensor Measurements (Pinless) 13

5.2.6 External Pin Probe Moisture Measurements 14

5.2.7 Reference Mode Moisture Measurements 15

5.3 Thermal Imager (IR) 15

FLIR MR160 USER MANUAL Document Identifier: MR160-en-US_AF

5.4 Lock/Unlock Palette Auto-Scale Mode 17

5.5 Screen Capture and Hold 17

5.6 ‘Combination’ Feature 18

5.7 High Moisture Alarm 20

5.8 SETTINGS Menu 21

6. MAINTENANCE 22

6.1 Cleaning 22

6.2 Battery Charging 22

6.2.1 Disposal of Electronic Waste 22

6.3 Updating the MR160 firmware 23

7. SPECIFICATIONS 24

8. TECHNICAL SUPPORT 26

9. MATERIAL GROUPS 27

9.1 Common Names of Timbers (BS888/589:1973) with MR160 Group Nos. 27

9.2 Botanical names of timbers with MR160 program group numbers 29

9.3 %WME Table (% Wood Moisture Equivalent) 31

10. WARRANTY 32

10.1 FLIR 10-Year Limited Warranty 32

FLIR MR160 USER MANUAL Document Identifier: MR160-en-US_AF

1. Disclaimers

1.1 Copyright

code may be reproduced, transmitted, transcribed or translated into any language or computer

language in any form or by any means, electronic, magnetic, optical, manual or otherwise, without

the prior written permission of FLIR Systems.

The documentation must not, in whole or part, be copied, photocopied, reproduced, translated or

transmitted to any electronic medium or machine-readable form without prior consent, in writing,

from FLIR Systems.

Names and marks appearing on the products herein are either registered trademarks or

trademarks of FLIR Systems and/or its subsidiaries. All other trademarks, trade names or company

names referenced herein are used for identification only and are the property of their respective

owners.

1.2 Quality Assurance

The Quality Management System under which these products are developed and manufactured

has been certified in accordance with the ISO 9001 standard.

FLIR Systems is committed to a policy of continuous development; therefore, we reserve the right

to make changes and improvements on any of the products without prior notice.

1.3 Documentation

To access the user manuals, warranty registration, firmware updates, and notifications go to the

Download tab at: https://support.flir.com. In the download area you will also find the latest

releases of manuals for our other products, as well as manuals for our historical and obsolete

products.

1.4 Disposal of Electronic Waste

As with most electronic products, this equipment must be disposed of in an

environmentally friendly way, and in accordance with existing regulations for

electronic waste.

Please contact your FLIR Systems representative for more details.

FLIR MR160 USER MANUAL Document Identifier: MR160-en-US_AF

2. Safety

2.1 Safety Notes

•Before operating the device, you must read, understand, and follow all instructions, dangers,

warnings, cautions, and notes.

•FLIR Systems reserves the right to discontinue models, parts or accessories, and other items,

or to change specifications at any time without prior notice.

2.2 Laser Safety

Warning Statement

•Do not look directly into the laser beam. The laser beam can cause eye irritation.

FLIR MR160 USER MANUAL Document Identifier: MR160-en-US_AF

3. Introduction

Thank you for selecting the FLIR MR160 Imaging Moisture Meter. The MR160 integrates high

quality thermal imaging technology with the best in class moisture detection and measurement.

The MR160 includes an integrated non-invasive pinless moisture sensor, and an external pin

moisture probe (MR02).

Featuring Infrared Guided Measurement (IGMTM) technology, the MR160 helps to quickly scan and

target moisture issues; visually guiding the user to the spot where measurements can be

confidently made and where readings can be easily analyzed. The MR160 can save measurements

and images for later transfer to a PC; reports can be generated with FLIR Tools PC software. Please

see www.flir.com/test for additional accessories available for this device. This device is shipped

fully tested and calibrated and, with proper use, will provide years of reliable service.

3.1 Key Features

•FLIR Lepton® microbolometer Focal Plane Array (FPA) with integrated shutter delivers best in

class thermal imaging

•Quickly scan for moisture using the integrated non-invasive pinless moisture sensor

•External pin probe (included) for resistive moisture content measurements

•IGM Moisture mode displays both the thermal image and moisture readings on one screen

•Moisture mode shows Pin or Pinless moisture readings with large digits and color bargraph

•Scale Lock adds precision to thermal image scanning

•Capture, view, & delete thermal images and measurements

•Nine (9) material group selections for pin‐based readings

•Programmable high moisture alarm with audible and color visual alerts

•Laser pointer and display crosshairs for targeting of anomalies found on thermal image

•Easy to read, color display with intuitive graphical interface and tool tips in local languages

•File management, image review, & report generation with free FLIR Tools PC software via USB

•Internal rechargeable battery with USB based international charger

FLIR MR160 USER MANUAL Document Identifier: MR160-en-US_AF

4. Meter and Menu Icon Descriptions

4.1 Meter Parts

1. Color Graphical Display

2. Screen Capture button

3. Four (4) Navigation buttons (ring)

4. Select button (center)

5. Back button

6. Laser Pointer / Crosshairs button

7. Power button

8. USB, External Probe jack, and charge LED

9. Laser pointer lens (back)

10. Thermal imaging lens (back)

11. Internal Pinless Moisture sensor (back)

12. Micro USB Port (bottom)

13. External Probe Jack (bottom)

14. Battery Charging LED status lamp (bottom)

Fig. 4-1 Meter Description

FLIR MR160 USER MANUAL Document Identifier: MR160-en-US_AF

4.2 Control Buttons

Image Capture button: Press to save a ‘screen-shot’. Refer to

section 5.5 Screen Capture and Hold for full details.

Back button. Press to back up or return from a menu screen.

Press to activate laser pointer/crosshairs in thermal imaging

modes.

Press to power the meter ON. Press and hold to power the meter

OFF.

Press the Select button (center) to access the Main Menu. Use this

button to select items from within the menu structure.

Use the four outer navigation (rim) buttons to move up-down-left-

right.

FLIR MR160 USER MANUAL Document Identifier: MR160-en-US_AF

4.3 Menu Map and Overview

The Menu structure is outlined below and covered thoroughly in subsequent sections of this

User Manual. The center Select button and the four (4) Navigation buttons are used to access

and program the modes of operation available from the menus. Refer to Fig. 4-2.

Icons 1 through 5 in Fig. 4-2 make up the Main Menu. Press the Select button to open the Main

Menu:

1. Image Review: view and delete IR Thermal Images

2. Image modes (items 10~14): IR, IR + IGM Moisture, Moisture only

3. Moisture modes: Material Groups, Pin Mode, Pinless Mode, Set Reference

4. Lock/Unlock Palette Auto-Scale: Select Lock to adjust the color palette range to suit a

given application (see Section 5.4 Lock/Unlock Palette Auto-Scale Mode for more detail).

Unlock for normal auto-scaling operation.

5. Settings utility: Language, Palette, High Alarm, Auto Power OFF, Date & Time, Help

contact screen, and Meter Information screen.

Icons 6 through 9 in Fig. 4-2 are available in the Moisture Mode Menu. Press icon 3 to view

these Moisture modes. A blue dot is shown to the left of the pin icon (7) or the pinless icon (8),

depending on which is selected.

6. Material Group: Select the material under test (Groups 1~9); For Pin Mode only. See

Section 9 for Wood and Material Group listings.

7. Pin mode: Select this mode when using external pin moisture probe.

8. Pinless mode: Select this mode when using the internal (rear) moisture sensor.

9. Set Reference: Select this mode to store the current reading as a reference value. For

pinless mode only.

Icons 10 through 12 in Fig. 4-2 are available in the Image Mode Menu. Press icon 2 to view the

Image Mode menu.

10. IR (View Thermal Image only)

11. IR + IGM Moisture (View Thermal Image +

Moisture readings)

12. Moisture only

Fig. 4-2 Menu Icons

FLIR MR160 USER MANUAL Document Identifier: MR160-en-US_AF

5. Operation

Important Note: Please charge the meter’s battery before first use. Instructions for battery

charging are provided in Section 6.2.

5.1 Powering the Meter

1. Press the Power button momentarily to switch the meter ON.

2. Press and hold the Power button for > 1 second to switch the meter OFF.

3. If the battery status indicator shows that the battery voltage is low, or if the meter does not

power on, charge the battery. See section 6.2 Battery Charging. The battery status indicator

is visible in the Main Menu (press the center Select button to access the Main Menu).

4. Please fully charge the battery before use.

5.1.1 Auto Power OFF (APO)

The meter switches OFF automatically after a programmed period of inactivity. Press any

button to reset the APO timer. To disable APO, or to change the APO time-out value, use the

Settings mode, accessible from the Main Menu. The default time-out is 20 minutes.

5.2 Moisture Measurements

5.2.1 Moisture Measurement Overview

Moisture measurements can be performed using either the internal pinless moisture sensor

(rear) or by connecting an external probe. A standard external pin probe is included which

connects to the MR160 via the jack at the bottom of the meter. Other external probes are

available; please visit www.flir.com/test for details.

NOTE: Objects near the internal pinless moisture sensor (located on the rear of the unit) will

affect the reading on the display; Keep hands and fingers clear of the sensor when taking

measurements.

The internal moisture sensor detects moisture to a depth of approximately 19mm (0.75”). The

actual depth will vary depending upon the amount of moisture, the material under test, surface

roughness, and other factors.

Moisture readings are shown on the display (digitally and with bar graph) in the Moisture-only

mode or in small digits (upper left-hand corner) in the IR + IGM Moisture mode. See Fig. 5-1.

Pinless measurement readings are ‘relative’scaled (0~100). Pin-based readings are represented

in terms of %MC (moisture content) for wood and %WME (wood moisture equivalent) for non-

wood materials; additional information is provided in Section 5.2.6 External Pin Probe Moisture

Measurements and in the specifications.

Moisture measurements are covered in detail in the following sections. Be sure to select Pin

Mode or Pinless Mode in the Moisture Menu to match the measurement type.

Autres manuels pour MR160

Table des matières

Autres manuels FLIR Instrument de mesure

FLIR

FLIR MR60 Manuel utilisateur

FLIR

FLIR Extech HDV-TX2 Manuel utilisateur

FLIR

FLIR Extech Instruments RH520A-240 Manuel utilisateur

FLIR

FLIR MR77 Manuel utilisateur

FLIR

FLIR EXTECH HDV-WTX2 Manuel utilisateur

FLIR

FLIR MR04 Manuel utilisateur

FLIR

FLIR MR160 Manuel utilisateur

FLIR

FLIR MR277 Manuel utilisateur

FLIR

FLIR Extech Instruments PQ34-2 Manuel utilisateur

FLIR

FLIR CM174 C Manuel utilisateur

FLIR

FLIR CM55 Manuel utilisateur

FLIR

FLIR VS80C10-25RM Manuel utilisateur

FLIR

FLIR CM42 Manuel utilisateur

FLIR

FLIR Extech PQ3450-30 Manuel utilisateur

FLIR

FLIR EXTECH RH520 Manuel utilisateur

FLIR

FLIR CM85 Manuel utilisateur

FLIR

FLIR CM72 Manuel utilisateur

FLIR

FLIR Extech 380926 Manuel utilisateur

FLIR

FLIR MR59 Manuel de l'opérateur

FLIR

FLIR VS80 KIT Manuel utilisateur

FLIR

FLIR MR55 Manuel utilisateur

FLIR

FLIR MR59 Manuel utilisateur

FLIR

FLIR Extech Instruments 380193 Manuel utilisateur

FLIR

FLIR Extech Instruments 480823 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur