FLIR EXTECH HDV-WTX2 Dimensions

Product sheet



Model HDV-WTX2

Wireless Articulating Semi-Rigid Probe

For use with the HDV600 Borescope only

Thank you for purchasing this professional camera probe. This sheet covers the warning and

specifications for the probe only. Instructions regarding the usage of the HDV600 Borescope are

provided in the Borescope User Guide.

Note: The camera LEDs become warm when set to maximum intensity

CAUTION: For the Articulating Probe, do not operate the articulation knob with the

probe in a coiled configuration. This will damage the articulation controls!

CAUTION: Always return the articulation and tension knobs to the neutral position

before removing the probe from the inspection area.

The label on the probe provides the Serial Number and Part Number in the format

shown below. Please do not remove this label; otherwise the warranty will be invalid.

Part No.TX1 F/M/R (flex/macro/rigid) Serial No: HDV110001

Warnings

•Do not bend to a smaller diameter than 10cm (4”)

•Warranty is invalid if stickers, tags, or labels are removed

Articulating Probe Description

1. Articulation knob

2. Articulation tension knob

3. Articulating camera

4. Light intensity buttons

5. Power button

6. AC Adaptor and extension cable sockets

7. Carrying strap

12 345

www.ponpe.com

contact:

[email protected]

Articulation Setup and Orientation

The articulation direction and orientation may change if the probe is twisted and coiled during use or

when stored. To re-orient the probe:

1. Place the extended probe on a flat surface

2. Set the tension “F” knob to the left or released position.

3. Set the articulation knob to the center position with the R Δand ΔL labels

in the horizontal position.

4. Manually adjust the probe and camera to the zero degree position.

5. Rotate the articulation knob clockwise for a 90° bend.

6. If necessary, manually adjust the probe so that the camera lays flat on the

surface with a 90° articulation

7. Rotate the articulation knob counter-clockwise and confirm proper

orientation.

Charging the Battery

The AC charger port and charging status LED are located in the bottom access compartment.

Connect the charger to the probe and observe the color of the LED. Red indicates the battery is

charging. Green indicates the battery is fully charged.

Note: The rechargeable battery is not user replaceable.

Specifications

Resolution 640 x 480 pixels

Length 2m (6.6’)

Outer diameter (O.D.) 6mm (0.02”)

Battery 3.7V rechargeable Li-Polymer

Focus distance 2 to 6cm (0.79 to 2.36”)

Housing Stainless Steel

Field of View 60º

Number of LEDs 4

Lamp Output 3500 Lux at 20mm

Operating Temperature -20 to 70°C (-4 to 158°F)

Storage Temperature -20 to 70°C (-4 to 158°F)

Warranty 1 year

www.extech.com

Revision 2.1 2/12

RΔ ΔL

www.ponpe.com

contact:

[email protected]

Table des matières

Autres manuels FLIR Instrument de mesure

FLIR

FLIR CM55 Manuel utilisateur

FLIR

FLIR Extech 380926 Manuel utilisateur

FLIR

FLIR ME13552 Manuel utilisateur

FLIR

FLIR Extech Instruments MA150 Manuel utilisateur

FLIR

FLIR CM72 Manuel utilisateur

FLIR

FLIR EXTECH INSTRUMENTS PQ3450 Manuel utilisateur

FLIR

FLIR CM174 C Manuel utilisateur

FLIR

FLIR EXTECH MA620 Manuel utilisateur

FLIR

FLIR Extech Instruments 380193 Manuel utilisateur

FLIR

FLIR VS80C10-25RM Manuel utilisateur

FLIR

FLIR MR176 Manuel utilisateur

FLIR

FLIR CM55 Manuel utilisateur

FLIR

FLIR CM85 Manuel utilisateur

FLIR

FLIR DM284 Manuel utilisateur

FLIR

FLIR Extech Instruments MA410 Manuel utilisateur

FLIR

FLIR IGM CM275 Manuel utilisateur

FLIR

FLIR DM284 Manuel utilisateur

FLIR

FLIR SV87-KIT Manuel utilisateur

FLIR

FLIR VS80A4-60-2RM Manuel utilisateur

FLIR

FLIR Imaging Moisture Meter Plus IGM MR176 Manuel utilisateur

FLIR

FLIR CM174 Manuel utilisateur

FLIR

FLIR EXTECH INSTRUMENTS PQ34-12 Manuel utilisateur

FLIR

FLIR Extech Instruments EX840 Manuel utilisateur

FLIR

FLIR VS80A2-45-1RM Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur