Fitbit Zip FLEX 2 Manuel utilisateur

There is an option to reset it, to make sure it is not a software related issue:

1. Plug the charging cable into the USB port on your computer or any UL-certified USB wall

charger.

2. Hold the other end of the charging cable near the port on the back of the tracker until it

attaches magnetically. The pins on the charging cable must connect securely with the port.

3. Press and hold the button on your tracker for 5 seconds.

4. Release the button. When you see a smile icon and the tracker vibrates, the tracker restarted.

Your tracker should now work normally. If your tracker still doesn't work after a restart, contact

How do I restart my Fitbit device?

If you experience any of the following issues, restart your device:

Won't sync

Won't respond to button presses, taps, or swipes

Charged but doesn't turn on

Won't track your steps or other stats

Restarting your device turns it off and on without deleting any activity data.

Some Fitbit devices have small holes for sensors such as the microphone or altimeter. Don’t attempt to restart your device by inserting any items, such as

paper clips, into these holes as you can damage your Fitbit device.

Ace & Alta series

1. Plug your charging cable into a USB port on your computer or any UL-certified USB

wall charger.

2. Clip the other end of the charging cable to the port on the back of the tracker. The pins on

the charging cable must lock securely with the port. You’ll know the connection is secure

when the tracker vibrates and you see a battery icon on your tracker’s display. Your

tracker will begin charging.

3. Press the button on your charging cable 3 times within a few seconds, briefly pausing

between presses. The button is on the end of the charging cable that is plugged into your

computer. When you see the Fitbit logo and the tracker vibrates, this means the tracker

has restarted.

4. Unplug your tracker from the charging cable.

Your tracker should now work normally. If your tracker still doesn't work after a restart, contact

Customer Support.

Ace 2 & Inspire series

1. Plug the charging cable into the USB port on your computer or any UL-certified USB

wall charger.

2. Hold the other end of the charging cable near the port on the back of the tracker until it

attaches magnetically. The pins on the charging cable must connect securely with the

port.

3. Press and hold the button on your tracker for 5 seconds.

4. Release the button. When you see a smile icon and the tracker vibrates, the tracker

restarted.

Your tracker should now work normally. If your tracker still doesn't work after a restart, contact

Customer Support.

Blaze, Ionic & Versa series

1. For Fitbit Blaze, Fitbit Versa, and Fitbit Ionic, press and hold the back and bottom

buttons until you see the Fitbit logo on the screen. For Fitbit Versa Lite Edition and Fitbit

Versa 2, hold the back button for 10 seconds.

2. Let go of the buttons.

3. If you still have issues with your device, turn it off and turn it back on. For more

information, see How do I turn off my Fitbit device?

If you need additional help, contact Customer Support.

Charge series

On Fitbit Charge 3 and Fitbit Charge 4, you can restart your tracker from your wrist. Open the

Settings app and tap About > Reboot Device.

If your Charge series tracker is unresponsive: .

1. Plug the charging cable into the USB port on your computer or any UL-certified USB

wall charger.

2. Clip the other end of the charging cable to the port on the back of the tracker. The pins on

the charging cable must lock securely with the port.

3. Make sure the button on your tracker is aligned with the button opening on the charging

cable. You’ll know the connection is secure when the tracker vibrates and you see a

battery icon on your tracker’s display.

4. Press and hold the button to restart your tracker:

1. Charge 2—press and hold the button on your tracker for 4 seconds. When you see

the Fitbit logo and the tracker vibrates, the tracker restarted.

2. Charge 3 & Charge 4—press and hold the button on your tracker for 8 seconds.

Release the button. When you see a smile icon and the tracker vibrates, the tracker

restarted.

5. Disconnect your tracker from the charging cable.

Your tracker should now work normally. If your tracker still doesn't work after a restart, contact

Customer Support.

Flex 2

These steps explain how to restart a Flex 2.

1. Plug the charging cable into the USB port on your computer or a UL-certified USB wall

charger.

2. Remove the pebble from the band and press it into the compartment on the charging

cable. The pins on the charging cable must align with the corresponding pins on the back

of the pebble to lock securely in place.

You’ll know the connection is secure when the pebble vibrates and you see the indicator

lights blinking.

3. Find the button on the charging cable below the tracker compartment.

4. Press it three times within five seconds. The tracker vibrates each time you press the

button. A few seconds after the third press, all the lights will flash simultaneously. This

means the pebble has restarted. If you miss the light flash but notice the pebble has 
resumed charging, that too is confirmation that the restart was successful. 
5. Remove the pebble from the charging cable and insert it back into the band. 
 
If Flex 2 still doesn't work after a restart, contact Customer Support. 
One 
1. Plug your charging cable into your computer. 
2. Plug your Fitbit One tracker into the charging cable, making sure that the gold contacts 
on your tracker align with the gold contacts in the inside of the charger. 
3. Hold down your tracker's button for 10-12 seconds. 
4. Remove your tracker from the charging cable and press its button until the screen turns 
on. 
Your tracker should now work normally. If your tracker still doesn't work after a restart, contact 
Customer Support. 
Zip 
1. Open the battery door using the battery door tool and remove the battery. 
2. Wait 10 seconds. 
3. Place the battery back into the tracker with the "+" side facing up, and close the door. 
Your Fitbit Zip is now restarted. You will see your tracker's version number, followed by a series 
of Fitbit Smilies. When you tap your tracker, it should work normally. If your tracker still doesn't 
work after a restart, contact Customer Support. 
Other devices 

Charge & Charge HR

1. Plug your charging cable into the USB port on your computer or any UL-certified USB

wall charger.

2. Insert the other end into the port on the back of your Fitbit Charge or Fitbit Charge HR.

Your tracker will begin charging.

3. Press and hold the button for 10 to 12 seconds until you see the Fitbit icon and a version

number (e.g. "V30").

4. Let go of the button.

5. Unplug your tracker from the charging cable.

Your tracker should now work normally. If your tracker still doesn't work after a restart, contact

Customer Support.

Flex

1. Plug your charging cable into a USB port on your computer or any UL-certified USB

wall charger.

2. Remove the pebble from the band and insert it into the charging cable.

3. Insert a paperclip into the small pinhole on the back of the charger.

4. Press on the pinhole for 3-4 seconds.

5. Take your tracker out of the charger and insert it back into the band.

Your tracker should now work normally. If your tracker still doesn't work after a restart, contact

Customer Support.

Surge

1. Press and hold the Home and Select buttons (left and bottom right) on your Fitbit Surge

for 10 to 15 seconds, until you see the screen flash or start to dim.

2. Let go of the buttons.

3. After your screen turns completely off, wait 10 seconds and press the Home button to

turn your Surge back on.

Your tracker should now work normally. If your tracker still doesn't work after a restart, contact

Customer Support.

Autres manuels pour FLEX 2

Table des matières

Autres manuels Fitbit Zip Suivi de forme physique

Fitbit Zip

Fitbit Zip Inspire Manuel utilisateur

Fitbit Zip

Fitbit Zip Inspire 2 Manuel utilisateur

Fitbit Zip

Fitbit Zip Alta Manuel utilisateur

Fitbit Zip

Fitbit Zip Charge 3 Manuel utilisateur

Fitbit Zip

Fitbit Zip Flex Manuel utilisateur

Fitbit Zip

Fitbit Zip Flex Instructions d'installation et d'entretien

Fitbit Zip

Fitbit Zip Charge Manuel utilisateur

Fitbit Zip

Fitbit Zip Sense Manuel utilisateur

Fitbit Zip

Fitbit Zip 10K-A-Day Manuel utilisateur

Fitbit Zip

Fitbit Zip FB417BK Manuel utilisateur

Fitbit Zip

Fitbit Zip inspire HR Manuel utilisateur

Fitbit Zip

Fitbit Zip Charge 3 Guide d'installation

Fitbit Zip

Fitbit Zip Charge HR Manuel utilisateur

Fitbit Zip

Fitbit Zip Zip Guide d'installation

Fitbit Zip

Fitbit Zip ace 2 Manuel utilisateur

Fitbit Zip

Fitbit Zip Charge Manuel utilisateur

Fitbit Zip

Fitbit Zip FB412 Manuel utilisateur

Fitbit Zip

Fitbit Zip Inspire Manuel utilisateur

Fitbit Zip

Fitbit Zip Charge HR 101 Manuel utilisateur

Fitbit Zip

Fitbit Zip Versa Manuel utilisateur

Fitbit Zip

Fitbit Zip FB512 Manuel utilisateur

Fitbit Zip

Fitbit Zip Charge 2 Manuel utilisateur

Fitbit Zip

Fitbit Zip Charge 4 Manuel utilisateur

Fitbit Zip

Fitbit Zip Inspire Manuel utilisateur

Manuels Suivi de forme physique populaires d'autres marques

Brigmton

Brigmton BSPORT-B2-N-A-R Manuel utilisateur

Marea Smart

Marea Smart B57004 Manuel utilisateur

Misfit

Misfit SHINE Manuel utilisateur

Yamaha

Yamaha BODIBEAT Manuel utilisateur

Seaver

Seaver CEEFIT Manuel utilisateur

Garmin

Garmin vívosmart HR Manuel d'instructions

Sky

Sky HEALTHBAND Manuel utilisateur

iHealth

iHealth Edge Manuel utilisateur

Holux

Holux Impulse 8050 Manuel utilisateur

Garmin

Garmin Vivosport Manuel utilisateur

Xiaomi

Xiaomi Mi Smart Band 6 NFC Manuel utilisateur

Microsoft

Microsoft Band Manuel utilisateur

HTC

HTC UA Band Manuel utilisateur

FitBand

FitBand F1 Manuel utilisateur

Huawei

Huawei Band 4 Manuel utilisateur

Nuband

Nuband HR63 Manuel utilisateur

GanRiver

GanRiver SW308 Manuel utilisateur

Valore

Valore VHA-18 Manuel utilisateur