Feelworld F970 Feuille d'instructions

5.5″ High Bright Monitor

F970 Install and Power Kit

User Manual

Foreword

Thank you for purchasing our 5.5-inch high bright touch screen monitor.

Please read this manual carefully before using the unit. Have a great

experience!

Caution

● Please avoid the heavy impact and drop onto the ground when move the

product.

● The screen of this product is made of glass. Please do not drop the screen

towards the ground. Keep away from injury if the screen is broken.

● Keep the product away from the heat source, and avoid the prolonged

exposures to the sun as the LCD screen will be damaged.

● To avoid damaging the product, please do not take apart or repair the unit by

yourself without the adjustable components in the unit.

● In order to better maintain the LCD screen and protect the cover, please

follow the following ways to avoid damages.

1. Please refrain from using the hard objects to hit the screen.

2. Please do not force to wipe the screen.

3. Please do not use the chemical solutions to clean the screen.

4. Please do not spray any detergent on the screen.

5. Please do not write on the screen directly.

6. Please do not stick on the screen.

7. Please simply wipe with a clean soft cloth and make sure no water on the

screen.

Key Features

5.5-inch 1920x1080 full HD IPS screen

Touch screen and intuitive button operation, meet different

needs.

High Brightness 1600nits, visible in sunlight

Supports 3D LUT Log to REC.709 and user 3D LUT upload (up

to 32).

Sony F970 external install and power kit design can be used to

install and supply power to external equipment, easy to install and

disassemble, simplify your photography equipment.

With Waveform, Vector scope, RGB Histogram, Focus Assist,

Monochrome etc. functions, can help you accurately exposure

and focus every shot.

Multiple power supply modes, DC IN 12V, Type-C 5V and NP-F

battery slot.

Stereo Earphone output

DC 8.4V power out to power your DSLR camera or mirrorless

camera.

CONTENTS

1. Product Description ----------------------------------------- 4

1.1 Front Panel Instruction -------------------------------------- 4

1.2 Rear Panel Instruction --------------------------------------- 4

1.3 Top Button Instruction --------------------------------------- 5

1.4 Bottom Port Instruction -------------------------------------- 6

1.5 Left Port Instruction ------------------------------------------ 6

1.6 Power Supply Way ------------------------------------------- 7

1.7 Sony F970 Install and Power Kit ------------------------- 10

1.8 Mount Points -------------------------------------------------- 10

1. 9 Sunshade ----------------------------------------------------- 12

2. Menu Operation Instruction ------------------------------ 13

3. Menu UI Interface Instruction ---------------------------- 14

4. Menu Function Instruction -------------------------------- 15

5. How to Load LUT --------------------------------------------- 21

6. Technical Parameters --------------------------------------- 22

7. Trouble Shooting --------------------------------------------- 23

1. Product Description

1.1 Front Panel Instruction

Indicator: After connecting the power, the indicator light is on (red).

Long Press button to turn on the monitor, it turns yellow.

After the signal is connected, it turns green.

1.2 Rear Panel Instruction

Battery Lock: The PUSH lock will lock after the battery installed,

please press PUSH firstly before remove the battery.

NP-F Battery Slot: It is applicable to install NP-F series of

batteries.

F970 Install and Power Kit: Installing the external equipment, like

wireless transmitter, LED light, video converter and others which can

be powered by Sony F970 battery. (The details see: 1.7 Sony F970

Install and Power Kit)

1.3 Top Button Instruction

Button

Function when OSD is not

displayed

Function when OSD is

displayed

Custom button F1

Custom button F2

Custom button F3

TOUCH

Turn ON/OFF touch function

Display OSD Main menu

Return to previous OSD menu

∨

Decrease the volume or

backlight

Select next menu item;

Decrease or adjust value of

selected parameter

∧

Increase the volume or

Select previous menu item;

backlight

Increase or adjust value of

selected parameter

Power On/Off button; Return/Exit Menu

1.4 Bottom Port Instruction

DC OUT 8.4V: DC power output interface, polarity as the output

power Barrel output for powering your camera with a

separately available DC coupler via adaptor (NP-FW50 Sony &

LP-E6 Canon&DMW-BLF19 Panasonic). More adapters coming

soon.

:3.5mm earphone port output

DC IN 5V (Type-C): Type-C power input. It is recommended to be

used for local power supply only. It is not recommended to connect

other devices to provide loop-out power.

1.5 Left Port Instruction (Left)

HDMI IN: V1.4, HDMI signal input, up to 4K@30Hz.

HDMI OUT: V1.4, HDMI signal output, up to 4K@30Hz.

DC IN 12V: DC power input, polarity as the input power

1.6 Power Supply Way

(1) The rear cover of the monitor is equipped with a F970 battery plate,

which is applicable to F970 series of batteries.

● Sony F970 battery plate for battery of Sony DV:

Sony F970 F960 F950 F930 F770 F750 F730 F570 F550 F530

series.

It is recommended to use standard original F970 battery.

When using battery power supply: two power output interfaces (DC OUT

8.4V interface and external install and power kit) can be connected to other

device. When powering other device, it is recommended to choose a

battery with a larger capacity, so the longer the use time.

Remark: Please take off the battery from the monitor if you

don’t use the monitor in a long time.

(2) The left side of the monitor has a DC 12V input power port

(5.5mm outer, 2.1mm inner) and supports 7 ~ 24V wide voltage.

The DC power adapter needs to be purchased separately.

When using external adapter input: two power output interfaces (DC OUT

8.4V interface and external install and power kit) can be connected to

other devices. When powering other equipment, it is recommended to

equip at least 3A power adapter.

(3) The bottom of the monitor has a Type-C 5V input power port.

This port can be connected to the power bank for power supply and is not

used for data transmission; it is recommended to be used only for local

power supply, and it is not recommended to connect other devices to

provide loop-out power.

1.7 Sony F970 Install and Power Kit

A Sony F970 external install and power kit design is added to the back

of the monitor. The external kit can be used to install and install the

external equipment, like wireless transmitter, LED light, video

converter and others which can be powered by Sony F970 battery.

The kit has two cross grooves, you can adjust the position of the external

device by loosening 2 screws up and down / left or right, or install the kit

upside down. When you don't need the kit, you can loosen the screws and

remove the kit.

Note: Before disassembling the kit, make sure that the monitor is

turned off, and then remove the battery or power adapter.

(1) Just move the kit: Loosen 2 screws, and then adjust up / down / left / right.

(2) Remove the external device: After the plug-in device is installed on the kit, if

your plug-in device has a locking button, and it is more difficult to press it to

remove it by hand, then you can use our assisting tool to disassemble.

(3) Steps to remove the kit:

①. Loosen the 2 screws.

②. Use both hands to move the kit up.

③. Move the round holes to the corresponding 2 screws.

(You can also install the kit upside down.)

Autres manuels pour F970

Table des matières

Autres manuels Feelworld Moniteur

Feelworld

Feelworld Master MA7 Manuel utilisateur

Feelworld

Feelworld FPV821 Manuel utilisateur

Feelworld

Feelworld FW759 Manuel utilisateur

Feelworld

Feelworld F970 Manuel utilisateur

Feelworld

Feelworld FW678 HD Manuel utilisateur

Feelworld

Feelworld FW619AHT Mode d’emploi

Feelworld

Feelworld FW689 Manuel utilisateur

Feelworld

Feelworld FW568 Manuel utilisateur

Feelworld

Feelworld Master MA7U Manuel utilisateur

Feelworld

Feelworld F570 Manuel utilisateur

Feelworld

Feelworld FVP215-9HSD Manuel utilisateur

Feelworld

Feelworld FW5D-TRM Manuel du propriétaire

Feelworld

Feelworld Master MA6 Manuel utilisateur

Feelworld

Feelworld Master MA6F Manuel utilisateur

Feelworld

Feelworld Master MA6P Manuel utilisateur

Feelworld

Feelworld F5Pro Manuel utilisateur

Feelworld

Feelworld FPV1032 Manuel utilisateur

Feelworld

Feelworld FW7D-DRM Manuel du propriétaire

Feelworld

Feelworld fpv121dt Manuel utilisateur

Feelworld

Feelworld Master MA7S Manuel utilisateur

Feelworld

Feelworld PVR733 Manuel utilisateur

Feelworld

Feelworld FW1018SPV1 Manuel utilisateur

Feelworld

Feelworld A737 Manuel utilisateur

Feelworld

Feelworld FW279 Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation