EPOX EP-V370Y Manuel utilisateur

TRADEMARK

All products and company names are trademarks or

registered trademarks of their respective holders.

These specifications are subject to change without

notice.

Manual Revision 1.0

February 2, 1999

EP-V370YEP-V370Y

EP-V370Y

A MendocinoA Mendocino

A Mendocino®SocSoc

SocSoc

Sockk

ket 370et 370

et 370et 370

et 370

Processor based AGPProcessor based AGP

Processor based AGP

mainboard (100/66MHz)mainboard (100/66MHz)

mainboard (100/66MHz)

EP-V370Y

Technical Support Services

If you need additional information, help during installation or normal use of this

product, please contact your retailer. If your retailer can not help, you may E-Mail us

with any questions at the following address [email protected]

Record your serial number before installing your EP-V370Y mainboard. (the serial

number is located near the ISA slots at the edge of the board)

EPoX EP-V370Y serial number:

__________________________

BIOS Upgrades

Please use either our Web Site for current BIOS Upgrades.

Internet Access

http://www.epox.com

[email protected]

Thank you for using EPoX mainboards!

EP-V370Y

User Notice

No part of this product, including the product and software may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language

in any form by any means without the express written permission of EPoX Computer

Company (hereinafter referred to as EPoX) except documentation kept by the

purchaser for backup purposes.

EPoX provides this manual “as is” without warranty of any kind, either express or

implied, including but not limited to the implied warranties or conditions of merchant-

ability or fitness for a particular purpose. In no event shall EPoX be liable for any

loss or profits, loss of business, loss of use or data, interruption of business or for

indirect, special incidental, or consequential damages of any kind, even if EPoX has

been advised of the possibility of such damages arising from any defect or error in

the manual or product. EPoX may review this manual from time to time without

notice. For updated BIOS, drivers, or product release information you may visit

EPoX’s home page at: http://www.epox.com

Products mentioned in this manual are mentioned for identification purposes only.

Product names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies.

The product name and revision number are both printed on the mainboard

itself.

Handling Procedures

Static electricity can severely damage your equipment. Handle the EP-V370Y

and any other device in your system with care and avoid unneccessary contact with

system components on the mainboard.

Always work on an antistatic surface to avoid possible damage to the motherboard

from static discharge.

We assume no responsibility for any damage to the EP-V370Y mainboard that

results from failure to follow installation instructions or failure to observe safety

precautions. CAUTION

TheEP-V370Ymainboardissubjectto

damagebystaticelectricity. Always

observethehandlingprocedures.

EP-V370Y

Table of Contents

Section 1 Introduction

ComponentsChecklist .................................... 1-1

Overview

EP-V370Y Form-Factor ................................ 1-2

I/OShieldConnector...................................... 1-3

Power-On/Off(Remote)................................. 1-3

SystemBlockDiagram ................................... 1-4

Section 2 Features

EP-V370Y Features....................................... 2-1

Section 3 Installation

EP-V370YDetailedLayout............................ 3-2

Easy Installation Procedure

ConfigureJumpers .......................................... 3-3

SystemMemoryConfiguration ........................ 3-4

DeviceConnectors ......................................... 3-7

ExternalModemRing-in Power ONand

Keyboard Power ON Function (KBPO) ........ 3-9

Section 4 Award BIOS Setup

BIOSInstructions ........................................... 4-1

Standard CMOS Setup .................................. 4-2

BIOS Features Setup ..................................... 4-3

ChipsetFeatures Setup ................................... 4-8

PowerManagement Setup .............................. 4-12

PNP/PCIConfiguration .................................. 4-16

LoadSetupDefaults ....................................... 4-18

IntegratedPeripherals ..................................... 4-18

Change Supervisor or User Password ............. 4-23

Page

EP-V370Y

IDEHDDAutoDetection............................... 4-24

HDDLowLevelFormat................................. 4-26

Save& Exit Setup .......................................... 4-26

ExitWithoutSaving......................................... 4-26

Section 5 PCI Sound

DriverInstallation............................................ 5-1

Section 6 Appendix

Appendix A

MemoryMap ................................................. A-1

I/O Map......................................................... A-1

Timer&DMAChannelsMap......................... A-2

InterruptMap ................................................. A-2

RTC & CMOS RAM Map ............................ A-3

Appendix B

POST Codes ................................................. A-5

UnexpectedErrors ......................................... A-8

Appendix C

LoadSetupDefaults ....................................... A-9

Appendix D

CPU Clock Frequency Selection In BIOS

Setting ............................................................ A-10

IntroductionEP-V370Y

Page 1-1

Section 1

INTRODUCTION

Components Checklist

üü

üA. (1) EP-V370Y mainboard

üü

üB. (1) EP-V370Y user’s manual

üü

üC. (1) Floppy ribbon cable

üü

üD. (1) Hard drive ribbon cables

E. (1) PS/2 to AT keyboard connector adapter (optional)

üü

üF (1) Bus master drivers

(1) USDM

(1) PCI Sound drivers

USERS

MANUAL

EP-V370Y

Introduction EP-V370Y

Page 1-2

EP-V370Y Form-Factor

The EP-V370Y is designed with MicroATX form factor - the new industry standard

of chassis. The MicroATX form factor is essentially a Baby-AT baseboard rotated

90 degrees within the chassis enclosure and a new mounting configuration for the

power supply. With these changes the processor is relocated away from the expan-

sion slots, allowing them all to hold full length add-in cards. MicroATX defines a

double height aperture to the rear of the chassis which can be used to host a wide

range of onboard I/O. Only the size and position of this aperture is defined, allowing

PC manufacturers to add new I/O features (e.g.; TV input, TV output, joystick,

modem, LAN, etc.) to systems. This will help systems integrators differentiate their

products in the marketplace, and better meet your needs.

•Smaller size promotes a smaller system size.

•I/O shield does not need to be retooled in an ATX 2.01 or later. Mainboard could

be used in an ATX 2.01-compliant.

•A smaller power supply cam be used. High integration on mainboard reduces the

system costs.

Fulllength

slots

Expandable I/O

5 1/4"

Bay

3 1/2"

Bay

Figure 2: Summary of MicroATX/ATX chassis features

CPU located near

Power Supply

Single chassis

fan for

system

Micro

ATX/

ATX

Power

Supply MicroATX/ATX

power connector

Floppy / IDE

connectors

close to

peripheral

bays

IntroductionEP-V370Y

Page 1-3

I/O Shield Connector

The EP-V370Y is equipped with an I/O back panel. Please use the appropriate I/O

shield (figure 3).

MicroATX

POWERSUPPLY

EP-V370Y Board

Power-On/Off (Remote)

The EP-V370Y has a single 20-pin connector for MicroATX power supplies. For

MicroATX/ATX power supplies that support the Remote On/Off feature, this should

be connected to the systems front panel for system Power On/Off button. The

systems power On/Off button should be a momentary button that is normally open.

The EP-V370Y has been designed with “Soft Off" functions. You can turn Off the

system from one of two sources: The first is the front panel Power On/Off the

button, and the other is the "Soft Off" function (coming from the EP-V370Y’s

onboard circuit controller) that can be controlled by the operating system. Windows

95/98 will control this when the user clicks that they are ready to Shutdown the

system.

Case (chassis) Power

ON/OFF button

Figure 4: Simple MicroATX/ATX Power

ON/OFF Controller

PS/2 Mouse

PS/2

KEYBOARD

USB port

COM1 COM2

parallel port

Speaker

Line_in

MIC

Figure 3: I/O back panel layout

Joystick/Midi port

Introduction EP-V370Y

Page 1-4

Figure 5: System Block Diagram

System Block Diagram

PAC

PCI Bridge

and memory

controller

VT82C693

VT82C596A

I/O Bridge

100/66MHz

66MHz

PCI

Sound AC

Mendocino

socket 370

Processor

Table des matières

Autres manuels EPOX Carte mère

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manuel utilisateur