Emerson Rosemount 2240S Manuel utilisateur
Quick Start Guide
00825-0100-2240, Rev AA
February2023
Rosemount™ 2240S Multi-input
Temperature Transmitter
Contents
About this guide...........................................................................................................................3
Overview....................................................................................................................................... 6
General information.................................................................................................................... 8
Sensor installation....................................................................................................................... 9
Rosemount 2240S Installation................................................................................................. 17
Configuration and operation....................................................................................................39
Quick Start Guide February2023
2 Emerson.com/Rosemount
1 About this guide
This Quick Start Guide provides basic guidelines for installation
and configuration of the Rosemount 2240S Multi-input Temperature
Transmitter.
NOTICE
Read this manual before working with the product. For personal and
system safety, and for optimum product performance, ensure you
thoroughly understand the contents before installing, using, or
maintaining this product.
For equipment service or support needs, contact your local Emerson
Automation Solutions/Rosemount Tank Gauging representative.
Spare Parts
Any substitution of non-recognized spare parts may jeopardize
safety. Repair, e.g. substitution of components etc, may also
jeopardize safety and is under no circumstances allowed.
Rosemount Tank Radar AB will not take any responsibility for faults,
accidents, etc caused by non-recognized spare parts or any repair
which is not made by Rosemount Tank Radar AB.
CAUTION
The products described in this document are NOT designed for
nuclear-qualified applications. Using non-nuclear qualified products
in applications that require nuclear-qualified hardware or products
may cause inaccurate readings. For information on Rosemount
nuclear-qualified products, contact your local Emerson Sales
Representative.
WARNING
WARNING - Substitution of components may impair Intrinsic Safety.
WARNING - To prevent ignition of flammable or combustible
atmospheres, disconnect power before servicing.
AVERTISSEMENT - La substitution de composants peut compromettre
la sécurité intrinsèque.
AVERTISSEMENT - Ne pas ouvrir en cas de presence d'atmosphere
explosive.
February2023 Quick Start Guide
Quick Start Guide 3
WARNING
Failure to follow safe installation and servicing guidelines could
result in death or serious injury.
Ensure only qualified personnel perform the installation.
Use the equipment only as specified in this manual. Failure to do so
may impair the protection provided by the equipment.
Do not perform any service other than those contained in this
manual unless you are qualified.
To prevent ignition of flammable or combustible atmospheres,
disconnect power before servicing.
Substitution of components may impair Intrinsic Safety.
WARNING
Explosions could result in death or serious injury
Verify that the operating atmosphere of the transmitter is consistent
with the appropriate hazardous locations certifications.
Before connecting a handheld communicator in an explosive
atmosphere, ensure the instruments are installed in accordance with
intrinsically safe or non-incendive field wiring practices.
Do not remove the gauge cover in explosive atmospheres when the
circuit is alive.
WARNING
High voltage that may be present on leads could cause electrical
shock.
Avoid contact with the leads and terminals.
Ensure the mains power to the device is off and the lines to any other
external power source are disconnected or not powered while wiring
the device.
WARNING
Electrical shock could cause death or serious injury.
Use extreme caution when making contact with the leads and
terminals.
Quick Start Guide February2023
4 Emerson.com/Rosemount
WARNING
Physical access
Unauthorized personnel may potentially cause significant damage to
and/or misconfiguration of end users’ equipment. This could be
intentional or unintentional and needs to be protected against.
Physical security is an important part of any security program and
fundamental to protecting your system. Restrict physical access by
unauthorized personnel to protect end users’ assets. This is true for
all systems used within the facility.
February2023 Quick Start Guide
Quick Start Guide 5
2 Overview
2.1 Components
Figure 2-1: Rosemount 2240S Components
A
B
E
D
F
C
A. Cover.
B. Entries (x 3) of type ½ - 14 NPT.
C. Lock nut for connection of Multi Spot Temperature sensor and
Water Level Sensors.
D. Cover screws (x 4).
E. External ground screw.
F. M32 Cable gland (option for remote mounting).
Quick Start Guide February2023
6 Emerson.com/Rosemount
2.2 Getting started
2.2.1 Start up a Rosemount Tank Gauging system
To start up a Rosemount Tank Gauging system do the following:
Procedure
1. Install the TankMaster software on the control room PC.
2. Prepare the start-up by recording the information that will be
needed for configuration of the various devices as described in
the Rosemount Tank Gauging System Configuration Manual.
3. Connect the Rosemount 2460 System Hub to the TankMaster
PC. The system hub may be connected via Modbus TCP, a
Rosemount 2180 Field Bus Modem, or directly via RS232 or
RS485 interface.
4. Connect the Rosemount 2410 Tank Hub to the Rosemount
2460 System Hub.
5. Connect the field devices, such as a Rosemount 5900S Radar
Level Gauge and a Rosemount 2240S Multi-input Temperature
Transmitter, to the Rosemount 2410 Tank Hub via the
Tankbus.
6. Configure the Rosemount 2460 System Hub (if included in
the system) by using the TankMaster WinSetup configuration
software.
7. Configure the Rosemount 2410 Tank Hub by using the
TankMaster WinSetup configuration software.
8. Configure field devices, such as the Rosemount 5900S and
the Rosemount 2240S, by using the TankMaster WinSetup
configuration software.
February2023 Quick Start Guide
Quick Start Guide 7
3 General information
3.1 Service support
For service support contact the nearest Emerson Automation
Solutions /Rosemount Tank Gauging representative. Contact
information can be found on the web site www.Emerson.com.
3.2 Product certifications
See the Rosemount 2240S Product Certifications document for
detailed information on the existing approvals and certifications.
3.3 Product recycling/disposal
Recycling of equipment and packaging should be taken into
consideration and disposed of in accordance with local and national
legislation/regulations.
Quick Start Guide February2023
8 Emerson.com/Rosemount
4 Sensor installation
4.1 Installation considerations
A Multiple Spot Temperature sensor (MST) and Water Level Sensor
(WLS), such as Rosemount 565, 566, or 765, must be installed on the
tank before installing the Rosemount 2240S Multi-input Temperature
Transmitter.
The sensor is normally anchored to the bottom of the tank by
attaching a weight at the end of the tube. A tank expands when it is
filled or warmed up, causing the roof to move slightly upwards. The
weight has a shackle which allows the tube to follow the expansion.
Multiple Spot Temperature sensor
•Be careful with the flexible protection tube
•Temperature and Water Level Sensors should be located as far
away as possible from heating coils and mixers.
•In case the flexible tube is damaged, please contact Emerson
Automation Solutions/Rosemount Tank Gauging.
•Do not attempt to fix or rebuild the temperature sensor since this
may cause serious malfunctions
Water Level Sensor
•Handle the Water Level Sensor carefully
•Leave the sensor protection on until the final positioning in the
tank
4.2 Multiple Spot Temperature sensor
A Multiple Spot Temperature sensor (MST) typically measures the
temperature with a number of Pt100 elements placed at different
heights to provide a temperature profile and average temperature of
the product. The spot elements are placed in a flexible gas tight tube
made of stainless steel which can be anchored to the tank bottom.
Up to 16 Pt100 temperature elements can be connected to a
Rosemount 2240S Multi-input Temperature Transmitter.
February2023 Quick Start Guide
Quick Start Guide 9
4.2.1 Installation on fixed roof tanks
On fixed roof tanks the MST is attached to a flange mounted on a
suitable nozzle.
Figure 4-1: Installation of Multiple Spot Temperature Elements
on Fixed Roof Tanks
A
B
D
E
F
H
C
G
A. Maximum product level
B. Recommended: 0.5 to 1 m (1.6 to 3.3 ft) below maximum filling
level
C. Upper spot element
D. First spot element
E. Minimum 1 m (3.3 ft)
F. Anchor weight
G. 2-15 kg (4.4-33 lbs)
H. 150-350 mm (5.9-13.8 in.)
Quick Start Guide February2023
10 Emerson.com/Rosemount
Autres manuels pour Rosemount 2240S
1
Table des matières
Autres manuels Emerson Émetteur
Emerson
Emerson Rosemount 3051 Manuel utilisateur
Emerson
Emerson Micro Motion 5700 Guide rapide
Emerson
Emerson Rosemount 702 Manuel utilisateur
Emerson
Emerson Micro Motion 3700 Manuel utilisateur
Emerson
Emerson Rosemount 3408 Manuel utilisateur
Emerson
Emerson Rosemount Analytical HART 5081-A-HT Manuel utilisateur
Emerson
Emerson Fisher C1 Manuel utilisateur
Emerson
Emerson Rosemount 3051 Manuel utilisateur
Emerson
Emerson Rosemount 3095 Manuel utilisateur
Emerson
Emerson MICRO MOTION 1500 Guide rapide
Emerson
Emerson Rosemount 2051 Manuel utilisateur
Emerson
Emerson Rosemount 1066 Manuel utilisateur
Emerson
Emerson Rosemount 5408 Manuel utilisateur
Emerson
Emerson Rosemount 520 Manuel utilisateur
Emerson
Emerson Rosemount 3300 Series Manuel utilisateur
Emerson
Emerson MICRO MOTION 2700 Manuel du propriétaire
Emerson
Emerson Rosemount Oxymitter 4000 Manuel utilisateur
Emerson
Emerson Rosemount 5408 Manuel utilisateur
Emerson
Emerson Rosemount Wireless Permasense WT210 Manuel utilisateur
Emerson
Emerson Rosemount 2088 Manuel utilisateur
Manuels Émetteur populaires d'autres marques
Dejero
Dejero EnGo 3x Manuel utilisateur
Rosemount
Rosemount 4600 Manuel utilisateur
Speaka Professional
Speaka Professional 2342740 Manuel utilisateur
trubomat
trubomat GAB 1000 Manuel utilisateur
Teledyne Analytical Instruments
Teledyne Analytical Instruments LXT-380 Manuel utilisateur
Rondish
Rondish UT-11 Manuel utilisateur
