Edelbrock 3628 Manuel utilisateur

Brochure #63-3628

Catalog #3628

Rev. 4/08 - AJ/mc

ALUMINUM FUEL RAIL KIT

For 1986 - 1995 Ford 5.0L EFI engines

Catalog #3628

INSTALLATION INSTRUCTIONS

PLEASE study these instructions carefully before beginning this installation. Most installations can be accomplished with

common tools and procedures. However, you should be familiar with and comfortable working on your vehicle. If you do

not feel comfortable performing this installation, it is recommended to have the installation completed by a mechanic. If

you have any questions, please call our Technical Hotline at: 1-800-416-8628, 7:00 am - 5:00 pm, Pacific Standard

Time, Monday through Friday or e-mail us at [email protected].

•DESCRIPTION: Aluminum Fuel Rail Kit #3628 is designed for 1986-1995 Ford Mustangs with the 5.0L V8 engine. This

fuel rail was designed to fit stock manifolds as well as Edelbrock Performer (3821), Performer RPM (7123), and Victor

Manifolds (2945). Spacers and/or grinding will be necessary for fuel rails to clear Edelbrock manifolds. It will be

necessary for the customer to supply their own fuel crossover and fuel pressure regulator, such as Edelbrock PN 1728.

It is designed to be used with stock or standard height injectors with a 2.50” o-ring to o-ring spacing such as our

Edelbrock MotoTron injectors. See our catalog under

“EFI Replacement Parts”

for details.

•FUEL RAIL KIT: Install fuel rail kit and your injectors using the included 1/4”-20 bolts. Apply an o-ring assembly lube

to the injector o-rings before installing them into the manifold and fuel rails. Brake system assembly lube works well.

Make sure that the o-rings of the injectors create a complete seal with the fuel rail and the intake manifold to prevent

any air or fuel leaks.

Kit includes the following:

❑

2 - Machined fuel rail extrusions (fuel rail ends tapped for 3/8" pipe)

❑

4 - Fuel Rail Bracket

❑

4 - ¼”-20 x 1” Socket Cap Bolt

❑

4 - ¼”-20 Hex Nut

❑

8 - 10-32 x 1/2” Hex Cap Screws

❑

4 - ¼” .300” Spacers

❑

4 - ¼” Washers

❑

1 - 3/8” NPT Plug

•FINAL CHECKS: After finishing assembly, check the following:

❑Check the fit of each injector. They should be able to rotate freely. The O-rings should be fully inside their

respective bores.

❑Activate the fuel pump and fully check the system for any leaks prior to starting the engine.

Edelbrock Corporation • 2700 California St. • Torrance, CA 90503

Tech-Line: 800-416-8628 • E-Mail: [email protected]

IMPORTANT NOTE:

Proper installation is the responsibility of the installer. Improper installation will void warranty and may

result in poor performance and engine or vehicle damage.

Table des matières

Autres manuels Edelbrock Pièce automobile

Edelbrock

Edelbrock 66332 Manuel utilisateur

Edelbrock

Edelbrock 71920 Manuel utilisateur

Edelbrock

Edelbrock 2925 Manuel utilisateur

Edelbrock

Edelbrock 70401 Manuel utilisateur

Edelbrock

Edelbrock 68812 Manuel utilisateur

Edelbrock

Edelbrock 2980 Manuel utilisateur

Edelbrock

Edelbrock 2281 Manuel utilisateur

Edelbrock

Edelbrock 63-0081 Manuel utilisateur

Edelbrock

Edelbrock Performer 1602 Manuel utilisateur

Edelbrock

Edelbrock 1711 Manuel utilisateur

Edelbrock

Edelbrock Intake Manifolds Guide d'application

Edelbrock

Edelbrock 3881 Manuel utilisateur

Edelbrock

Edelbrock 70405 Manuel utilisateur

Edelbrock

Edelbrock Kawasaki KFX400 Manuel utilisateur

Edelbrock

Edelbrock 67452 Manuel utilisateur

Edelbrock

Edelbrock Honda TRX300EX Manuel du propriétaire

Edelbrock

Edelbrock 1403-1413 Manuel utilisateur

Edelbrock

Edelbrock Honda/Acura B-Series 4730 Manuel utilisateur

Edelbrock

Edelbrock 66112 Manuel utilisateur

Edelbrock

Edelbrock 3867 Manuel utilisateur

Edelbrock

Edelbrock Torker-Plus 265-400 Manuel utilisateur

Edelbrock

Edelbrock 72961 Manuel utilisateur

Edelbrock

Edelbrock 25-4066 Manuel utilisateur

Edelbrock

Edelbrock 47522 Manuel utilisateur

Manuels Pièce automobile populaires d'autres marques

Dakota Digital

Dakota Digital 650277 Manuel utilisateur

bosal

bosal 037031 Manuel utilisateur

Vintage Air

Vintage Air 571063 Manuel utilisateur

GFB

GFB EX38 Manuel utilisateur

bosal

bosal 028091 Manuel utilisateur

Dodge

Dodge 8W-43 Guide de démarrage rapide

ICI

ICI Magnum FBM10DGN Manuel utilisateur

Volant Perfomance

Volant Perfomance 19435 Manuel utilisateur

BENDIX

BENDIX GEN 4 GEN 5 ABS Manuel utilisateur

Vintage Air

Vintage Air 571065 Manuel utilisateur

Rugged Ridge

Rugged Ridge 11503.13 Manuel utilisateur

BENDIX

BENDIX CYCLONE DURADRAIN TRAILER WATER Manuel utilisateur

Porsche

Porsche 968 - ASSEMBLY INSPECTION PROCEDURE AND MAINTENANCE... Mode d’emploi

Sumitomo

Sumitomo FINE CYCLO FC-A 15 G Manuel utilisateur

Toshiba

Toshiba 48-1250 A Manuel utilisateur

aldes

aldes EHT2 Manuel utilisateur

Go Rhino

Go Rhino 24371T Manuel utilisateur

BBK

BBK 18950 Manuel utilisateur