Edelbrock 65063 Manuel utilisateur

Brochure #63-65063

Catalog #65063, #65073, #65083, #65123

Rev. 4/08 - AJ/mc Page 1 of 2

EDELBROCK RETRO-FIT HEADER SYSTEM

For GM Bodies: A ‘64-’67, ‘68-’72; F ‘70-’81; and X ‘75-’79

Catalog #65063, 65073, 65083, 65123

INSTALLATION INSTRUCTIONS

Please study these instructions carefully before installing your new Edelbrock Retro-Fit LS1 Header System. If you have any

questions, please contact our Technical Hotline at: 1-800-416-8628 , 7am - 5pm, Monday-Friday, Pacific Standard Time or e-mail

us at [email protected].

DESCRIPTION: These header systems are designed to improve the exhaust efficiency of either the Vortec style head equipped

Small Block Chevrolet engine or the LS series engine as it is used in the A, F, or X-body chassis. It is highly recommended to use

the Edelbrock Engine Mounting Adapter Plates # 6701 for the LS series engine headers #65063 or #65073. These headers are

designed to work with the corresponding Edelbrock Header-Back for the appropriate chassis style.

Suggested Tools for Installation:

❑SAE and metric sockets, ratchets, and wrenches ❑Floor jack and load rated jackstands

APPLICATIONS: HEADER COMPONENTS:

IMPORTANT NOTE:

Proper installation is the responsibility of the installer. Improper installation will void

warranty and may result in poor performance and engine or vehicle damage.

KIT CONTENTS (#65063 & #65073): KIT CONTENTS (#65083 & #65123):

Part #: Year Range: Body Style: Engine Family:

65063 1964 - 1967 ALS1

65073 1968 - 1972 ALS1

65073 1970 - 1981 FLS1

65073 1975 - 1979 XLS1

65083 1964 - 1972 AVortec

65123 1970 - 1981 FVortec

65123 1975 - 1979 XVortec

Part #: Quantity: Component #: Description

65063 1 25-9825 Left Header

65063 1 25-9826 Right Header

65073 1 25-9810 Left Header

65073 1 25-9811 Right Header

65083 1 25-9821 Left Header

65083 1 25-9822 Right Header

Quantity: Component #: Description:

254-8200 3” Donut Gaskets

254-6600 LS series Port Flange Gaskets

12 68-0350 8mm - 1.25 x 30mm Bolts

12 82-4620 8mm Lock Washers

12 82-8721 8mm Hardened Washers

468-8565 3/8” - 16 x 2-1/2” Hex Bolts

482-5240 3/8” Flat Washers

482-5590 3/8” Lock Washers

460-9185 3/8” - 16 Hex Nut

252-9710 O2Sensor Bungs

223-4113 Collector Flange

279-9027 Collector Ext. (Stub Tube)

Quantity: Component #: Description:

254-8200 3” Donut Gaskets

254-6590 Port Flange Gaskets

12 36-0716 3/8” - 16 x 1” Header Bolts

482-7231 3/8” Hardened Washers

468-8565 3/8” - 16 x 2-1/2” Hex Bolts

482-5240 3/8” Flat Washers

16 82-5590 3/8” Lock Washers

460-9185 3/8” - 16 Hex Nut

223-4113 Collector Flange

279-9027 Collector Ext. (Stub Tube)

Brochure #63-65063

Catalog #65063, #65073, #65083, #65123

Rev. 4/08 - AJ/mc Page 2 of 2

WARNING!!!

Exhaust gas contains carbon monoxide, a deadly invisible gas. Correct any leaks before driving!

Edelbrock Corporation, 2700 California St., Torrance, CA 90503

Tech Line: (800) 416-8628 Office: (310) 781-2222

E-Mail: [email protected]

1. Raise and support vehicle at least 16” off of the ground.

2. Remove any existing exhaust manifold and or pipes that will interfere with the installation of the headers.

3. On some vehicles, it may be necessary to remove the steering shaft. Mark its orientation to the connector at the steering box,

remove clamp bolt, and slide shaft off of the steering box input shaft.

4. Install the headers on to the engine using the supplied gaskets, bolts, and washers. Install all the header bolts in the header

before tightening them. Removal of the starter will make header installation easier in some applications.

5. If the steering shaft was removed, install the shaft on to the steering box making sure to align the marks made in step 3.

6. Install supplied donut on to the collector outlet of the header.

7. O2 sensor bungs are supplied in systems #65063 & #65073. They should be placed according to the recommendations of the

EFI system or AFR metering device you are using, but are not generally required for carbureted applications.

Note: Edelbrock Header-Back Exhaust Systems are designed to bolt directly to the collector of these headers.

INSTALLATION PROCEDURE

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Edelbrock Pièce automobile

Edelbrock

Edelbrock 5782 Manuel utilisateur

Edelbrock

Edelbrock 68812 Manuel utilisateur

Edelbrock

Edelbrock Honda 4743 Manuel utilisateur

Edelbrock

Edelbrock 66182 Manuel utilisateur

Edelbrock

Edelbrock 65022 Manuel utilisateur

Edelbrock

Edelbrock 17932 Manuel utilisateur

Edelbrock

Edelbrock 68952 Manuel utilisateur

Edelbrock

Edelbrock 1565 Manuel utilisateur

Edelbrock

Edelbrock 68982 Manuel utilisateur

Edelbrock

Edelbrock 8123 Manuel utilisateur

Edelbrock

Edelbrock 5652 Manuel utilisateur

Edelbrock

Edelbrock Harley Nitrous Systems 63-0052 Manuel utilisateur

Edelbrock

Edelbrock Predator Carburetor Manuel du propriétaire

Edelbrock

Edelbrock Performer Series 8059 Manuel utilisateur

Edelbrock

Edelbrock 6571 Manuel utilisateur

Edelbrock

Edelbrock 5734 Manuel utilisateur

Edelbrock

Edelbrock 65252 Manuel utilisateur

Edelbrock

Edelbrock 68712 Manuel utilisateur

Edelbrock

Edelbrock 5682 Manuel utilisateur

Edelbrock

Edelbrock 29085 Manuel utilisateur

Edelbrock

Edelbrock 2121 Manuel utilisateur

Edelbrock

Edelbrock 5253 Manuel utilisateur

Edelbrock

Edelbrock 5291 Manuel utilisateur

Edelbrock

Edelbrock 5056 Manuel utilisateur

Manuels Pièce automobile populaires d'autres marques

Dakota Digital

Dakota Digital 650277 Manuel utilisateur

bosal

bosal 037031 Manuel utilisateur

Vintage Air

Vintage Air 571063 Manuel utilisateur

GFB

GFB EX38 Manuel utilisateur

bosal

bosal 028091 Manuel utilisateur

Dodge

Dodge 8W-43 Guide de démarrage rapide

ICI

ICI Magnum FBM10DGN Manuel utilisateur

Volant Perfomance

Volant Perfomance 19435 Manuel utilisateur

BENDIX

BENDIX GEN 4 GEN 5 ABS Manuel utilisateur

Vintage Air

Vintage Air 571065 Manuel utilisateur

Rugged Ridge

Rugged Ridge 11503.13 Manuel utilisateur

BENDIX

BENDIX CYCLONE DURADRAIN TRAILER WATER Manuel utilisateur

Porsche

Porsche 968 - ASSEMBLY INSPECTION PROCEDURE AND MAINTENANCE... Mode d’emploi

Sumitomo

Sumitomo FINE CYCLO FC-A 15 G Manuel utilisateur

Toshiba

Toshiba 48-1250 A Manuel utilisateur

aldes

aldes EHT2 Manuel utilisateur

Go Rhino

Go Rhino 24371T Manuel utilisateur

BBK

BBK 18950 Manuel utilisateur