Edelbrock 5645 Manuel utilisateur

Brochure #63-5645 Page 1 of 2

Catalog #5645

Rev. 9/06 - DA/mc

EDELBROCK CAT-BACK EXHAUST SYSTEM

Vehicle Applications: See Below

Catalog #5645, #5646, #5647, & #5649

INSTALLATION INSTRUCTIONS

Vehicle Applications:

Catalog #5645 - 1987-1993 Ford Mustang GT with 5.0L V8 engine

Catalog #5646 - 1986-1993 Ford Mustang LX &

1986 Mustang GT with 5.0L V8 engine

Catalog #5647 - 1994-1997 Ford Mustang GT with 4.6L / 5.0L V8 engine

Catalog #5649 - 1999-2004 Ford Mustang GT with 4.6L V8 engine

Suggested Tools for Installation:

❑3/8” rachet set and 15mm socket ❑9/16” and 15mm wrenches

❑Jackstands ❑Liquid penetrant

Disassembly

1. Raise vehicle and support with the proper jackstands,

leaving the rear suspension hanging.

2. Use caution around hot exhaust systems to avoid

burns.

3. Use penetrating oil on all nuts, bolts and rubber

hangers.

4. If you are using a lift or jackstands, the old system can

be removed in one piece by removing the lower shock

bolts and the upper arm bolts to let the rear end hang

down as far as possible. Remove the nuts to the

catalytic converter pipes and remove the old muffler

assembly.

5. If you do not have access to a lift, it will be necessary

to cut off the tail pipes behind the mufflers, then

remove old mufflers.

Please study these instructions carefully before installing your new Cat-Back Exhaust System. If you have any questions,

please contact our Technical Hotline at: 1-800-416-8628, 7:00 am to 5:00 pm, Monday through Friday, Pacific

Standard Time or e-mail us at [email protected].

WARNING: Exhaust gas contains carbon monoxide, a deadly invisible gas. Correct any leaks before driving!

Assembly

1. Install the left and right muffler assembly to the

catalytic pipes. Refer to parts list to identify left and

right muffler. Using O.E.M. nuts, snug mufflers only

hand tight at this time.

2. Install the 2-1/2” band clamps onto the mufler outlets.

Install the tail pipes into the mufflers, and the brackets

into the stock rubber isolators.

3. Align the system to clear the chassis and suspension

and tighten all fasteners. It is important to tighten

catalytic pipe flanges evenly for proper leak free seal.

Check and correct, if needed. NOTE: Bumper height

may vary by as much as 1/2” on different vehicles, so

you may need to bend the rear hangers to adjust for

your application.

IMPORTANT NOTE:

Proper installation is the responsibility of the installer. Improper installation will void warranty and may

result in poor performance and engine or vehicle damage.

INSTALLATION INSTRUCTIONS

WARNING: Support your vehicle with proper

jackstands rated for the total vehicle weight.

Place stands so that the rear axle is allowed to

hang free for easy system removal.

WARNING: These cat-back systems are

engineered to fit stock catalytic converters or

equivalent replacements. If you original system has

been modified, Edelbrock will not warranty fit or

performance.

Brochure #63-5645

Catalog #s 5645, 5646, 5647, 5649

Rev. 9/06 - DA/mc

Page 2 of 2

Qty. PN Description

❑ 1 25-3031 SDT Muffler Assembly, Right,

#5645, #5646, #5647

❑ 1 25-3080 SDT Muffler Assembly, Right,

#5649 only

❑ 1 25-3032 SDT Muffler Assembly, Left,

#5645, #5646 only

❑ 1 25-3037 SDT Muffler Assembly, Left,

#5647 only

❑ 1 25-3081 SDT Muffler Assembly, Left,

#5649 only

❑ 1 25-3033 Right Tailpipe (#5645 only)

❑ 1 25-3035 Right Tailpipe (#5646, #5647,

#5649)

❑ 1 25-3034 Left Tailpipe (#5645 only)

❑ 1 25-3036 Left Tailpipe (#5646, #5649)

❑ 1 25-3038 Left Tailpipe (#5647 only)

❑ 1 25-3187 Right Tailpipe Assembly (#5649)

❑ 1 25-3188 Left Tailpipe Assembly (#5649)

❑ 1 25-3172 Right Muffler Assembly (#5649)

❑ 1 25-3173 Left Muffler Assembly (#5649)

❑ 2 - 2-1/2” Band Clamps (Not Shown)

KIT CONTENTS

Cat-Back Exhaust System

Muffler Assembly (Right)

Muffler Assembly (Left)

Right Tailpipe Assembly

Left Tailpipe Assembly

Cat-Back Exhaust System #5645

Muffler Assembly (Right)

Muffler Assembly (Left)

Right Tailpipe Assembly

Left Tailpipe Assembly

Cat-Back Exhaust System #5646, #5647, & #5649

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Edelbrock Pièce automobile

Edelbrock

Edelbrock 16211-MBN-640 Manuel du propriétaire

Edelbrock

Edelbrock 17934 Manuel utilisateur

Edelbrock

Edelbrock 71850 Manuel utilisateur

Edelbrock

Edelbrock 29085 Manuel utilisateur

Edelbrock

Edelbrock Edelbrock Headers 65632 Manuel utilisateur

Edelbrock

Edelbrock THUNDER SERIES AVS 1803 Manuel utilisateur

Edelbrock

Edelbrock 29565 Manuel utilisateur

Edelbrock

Edelbrock 5680 Manuel utilisateur

Edelbrock

Edelbrock 2828 Manuel utilisateur

Edelbrock

Edelbrock 6566 Manuel utilisateur

Edelbrock

Edelbrock 1803 Manuel utilisateur

Edelbrock

Edelbrock Russell 651107 Manuel utilisateur

Edelbrock

Edelbrock 65102 Manuel utilisateur

Edelbrock

Edelbrock 70024 Manuel utilisateur

Edelbrock

Edelbrock 70003 Manuel utilisateur

Edelbrock

Edelbrock 2917 Nstallation Manuel utilisateur

Edelbrock

Edelbrock 5253 Manuel utilisateur

Edelbrock

Edelbrock 7107 Manuel utilisateur

Edelbrock

Edelbrock 4803 Manuel utilisateur

Edelbrock

Edelbrock 5213 Manuel utilisateur

Edelbrock

Edelbrock Victor X 4760 Manuel utilisateur

Edelbrock

Edelbrock Square-Bore Carb 2696 Manuel utilisateur

Edelbrock

Edelbrock PERFORMER-PLUS 2167 Manuel utilisateur

Edelbrock

Edelbrock 90 V6 200 Manuel utilisateur

Manuels Pièce automobile populaires d'autres marques

Dakota Digital

Dakota Digital 650277 Manuel utilisateur

bosal

bosal 037031 Manuel utilisateur

Vintage Air

Vintage Air 571063 Manuel utilisateur

GFB

GFB EX38 Manuel utilisateur

bosal

bosal 028091 Manuel utilisateur

Dodge

Dodge 8W-43 Guide de démarrage rapide

ICI

ICI Magnum FBM10DGN Manuel utilisateur

Volant Perfomance

Volant Perfomance 19435 Manuel utilisateur

BENDIX

BENDIX GEN 4 GEN 5 ABS Manuel utilisateur

Vintage Air

Vintage Air 571065 Manuel utilisateur

Rugged Ridge

Rugged Ridge 11503.13 Manuel utilisateur

BENDIX

BENDIX CYCLONE DURADRAIN TRAILER WATER Manuel utilisateur

Porsche

Porsche 968 - ASSEMBLY INSPECTION PROCEDURE AND MAINTENANCE... Mode d’emploi

Sumitomo

Sumitomo FINE CYCLO FC-A 15 G Manuel utilisateur

Toshiba

Toshiba 48-1250 A Manuel utilisateur

aldes

aldes EHT2 Manuel utilisateur

Go Rhino

Go Rhino 24371T Manuel utilisateur

BBK

BBK 18950 Manuel utilisateur