DMP Electronics 734N Series Guide d'installation

INSTALLATION AND PROGRAMMING GUIDE

734N Series Wiegand

Interface Modules

About the 734N Series .............................. 1

Power Supply......................................................... 1

Zone Terminals ...................................................... 1

Annunciators.......................................................... 1

Indicator LEDs ...................................................... 2

Form C Relay......................................................... 2

Programming Connection................................ 2

PCB Features...............................................3

Install the 734N Series Module.................4

Mount the 734N ................................................... 4

Wire the Electronic Lock.................................. 5

Isolation Relay (optional) ................................. 8

Install the 333Suppressor ............................... 9

Wire the Zone Terminals..................................10

Connect a Card Reader....................................12

Network Connection.........................................15

Set the 734N Address.......................................16

Connect the Power Supply.............................18

TABLE OF CONTENTS

Program the 734N Series Module.......... 19

Version Display...................................................20

Zone Status Display..........................................20

Diagnostic: Menu ...............................................20

Connect Status....................................................21

Programming Menu..........................................22

Initialization Options........................................ 22

Initialization: Communication.......................22

Initialize Conﬁrm Option ................................22

Initialization: Access.........................................23

Initialize Conﬁrm Option ................................23

Communication Menu......................................23

734N Device Number .....................................23

734N DHCP..........................................................24

734N IP Address................................................24

Subnet Mask........................................................24

Gateway Address ..............................................24

Panel IP Address................................................24

Panel IP Port........................................................25

734N Passphrase ...............................................25

Access Options ..................................................25

Activate Zone 2Bypass..................................26

Zone 2Bypass Time......................................... 27

Relock on Zone 2Change.............................. 27

Activate Zone 3Request to Exit .................28

Zone 3 REX Strike Time..................................29

Activate Onboard Speaker............................29

Card Formats ......................................................29

Custom Card Deﬁnitions ........................ 30

Card Format Number...................................... 30

Format Name.......................................................31

Wiegand Code Length.....................................31

Site Code Position and Length ....................32

User Code Position and Length...................32

Require Site Code .............................................33

Site Code ..............................................................33

Number of User Code Digits.........................34

No Communication with Panel ....................35

Stop .......................................................................36

Public Card Formats ................................37

734N Series Network Speciﬁcations .....38

Compliance Listing Speciﬁcations ....... 40

UL Access Control............................................ 40

ULC Commercial Burglary

(XR150/XR550Series Panels)......................42

Certiﬁcations............................................ 43

Underwriters Laboratory (UL Listed)........43

Product Speciﬁcations ........................... 44

Readers and Credentials ........................ 46

Digital Monitoring Products, Inc. | 734N Series Installation and Programming Guide 1

Zone Terminals

Four input zones are provided to allow

connection of nearby burglary devices.

Annunciators

An onboard programmable piezo provides

local annunciation at the module. You can

also connect a variety of switched ground

annunciators to the module for remote

annunciation.

The 734N, and 734N‑POE Wiegand Interface Modules allow you to add IP network

access control capability to XR150/XR550Series panels using proximity, credential, or

mag‑stripe card readers. The modules also allow you to use the powerful built‑in access

control capability of DMP Panels.

Power Supply

734N Series modules operate at

12/24VDC from the power supply

supporting a door’s magnetic lock or

door‑strike. The 734N‑POE can also be

powered from POE.

Warning: To avoid the risk of

equipment damage, do not exceed

750mA total output current for zones

connected to the module.

ABOUT THE 734N SERIES

2 734N Series Installation and Programming Guide | Digital Monitoring Products, Inc.

Indicator LEDs

734N Series modules provide three indicator LEDs. The red LED turns on for the same

duration as the door strike relay. The yellow LED turns on for one second to indicate

receipt of a valid Wiegand input. The green LED indicates that data is being sent to the

panel.

Form C Relay

The 10Amp Form C relay draws up to 35mA of current. See NC/C/NO (Dry Contact

Relay) and Isolation Relay for more information.

Programming Connection

The modules also provide a keypad programming connection for use with a standard

DMP LCD keypad for initial setup. Programming can be completed using a keypad

connected to the module or from XR150/XR550panels.

Digital Monitoring Products, Inc. | 734N Series Installation and Programming Guide 3

PCB FEATURES

Input

Wiegand

Inputs Zones

Piezo

Indicator

LEDs

Door Relay

Network

Connection

Figure1: PCB Features

Keypad

Programming

Header

Status

Indicator

Outputs

Output 1

Reset Header

Output 2

4 734N Series Installation and Programming Guide | Digital Monitoring Products, Inc.

INSTALL THE 734N SERIES MODULE

Mount the 734N

The module comes in a high‑impact plastic housing that you can mount directly to a

wall, backboard, or other ﬂat surface.

For easy installation, the back and ends of the 734N housing have wire entrances. The

back also contains multiple mounting holes that allow you to mount the module on

a single‑gang switch box. DMP recommends mounting the 734N near the protected

door. See Figure2for mounting hole locations on the housing base.

1. Remove the PCB from the

plastic housing by loosening

the clips on one side and gently

lifting it out of the housing base.

2. Insert the included screws in the

desired mounting hole locations

and tighten them to secure the

housing to the surface.

3. Reinstall the PCB in the housing

base.

Mounting Holes

Figure2: Mounting Hole Locations

Digital Monitoring Products, Inc. | 734N Series Installation and Programming Guide 5

Wire the Electronic Lock

The module provides a Form C (SPDT) relay for controlling locks and other

electronically‑controlled barriers. The three relay terminals marked NO C NC allow

you to connect the device wiring to the relay for module control.

When the 734N Series module is powered with a 12/24V power supply, the device

can power an electric strike, up to 750mA. See Figures 3and 4for typical magnetic

lock and door strike wiring. The 734N‑POE can also be powered with POE. See

Figure5for POE door strike wiring.

The Form C relay draws up to 35mA of current and contacts are rated for 10Amps

(resistive) at 12/24VDC. When connecting multiple locks to the Form C relay, the

total current for all locks cannot exceed 10Amps. If the total current for all locks

exceeds 10Amps, problems may arise and an isolation relay may be needed. See

Isolation Relay for more information.

6 734N Series Installation and Programming Guide | Digital Monitoring Products, Inc.

PROG

RED RED

KYPD IN

DATA

XMT LED

WIEGAND

READ LED

RELAY

NCCNO

GRNYELRED

Model 333

Suppressor

Normally Closed

–

Magnetic Door Lock

12/24 VDC

Power Supply

PROG

RED

DATA

XMT LED

WIEGAND

READ LED

RELAY

NCCNO

GRNYELRED

Model 333

Suppressor

Normally Open

–+

DC Door Strike

12/24 VDC

Power Supply

Figure4: Typical Door Strike WiringFigure 3: Typical Magnetic Lock Wiring

Autres manuels pour 734N Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels DMP Electronics Unité de contrôle

DMP Electronics

DMP Electronics 867 W LX-BUS Manuel utilisateur

DMP Electronics

DMP Electronics 263EXT Manuel utilisateur

DMP Electronics

DMP Electronics 780 Guide d'installation

DMP Electronics

DMP Electronics 400 Instructions d'utilisation et d'entretien

DMP Electronics

DMP Electronics RoBoard RM-G146 Manuel utilisateur

DMP Electronics

DMP Electronics 734INT Guide d'installation

DMP Electronics

DMP Electronics 400 Manuel utilisateur

DMP Electronics

DMP Electronics 1134 Guide d'installation

DMP Electronics

DMP Electronics 861 Manuel utilisateur

DMP Electronics

DMP Electronics RoBoard RM-G211 Manuel utilisateur

DMP Electronics

DMP Electronics 734 Manuel utilisateur

DMP Electronics

DMP Electronics 708 Manuel utilisateur

DMP Electronics

DMP Electronics 711S Manuel utilisateur

DMP Electronics

DMP Electronics 714N-POE Guide d'installation

DMP Electronics

DMP Electronics 893A Manuel utilisateur

DMP Electronics

DMP Electronics 734B Guide d'installation

DMP Electronics

DMP Electronics 738ZplusINT Manuel utilisateur

DMP Electronics

DMP Electronics 736P Radionics Manuel utilisateur

DMP Electronics

DMP Electronics 734N Series Guide d'installation

DMP Electronics

DMP Electronics ITI 738I Guide d'installation

DMP Electronics

DMP Electronics 1134 Guide d'installation

DMP Electronics

DMP Electronics 712-8 Manuel utilisateur

DMP Electronics

DMP Electronics Wiegand 734N Manuel utilisateur

DMP Electronics

DMP Electronics 734 Guide d'installation

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur