Danfoss Living connect Manuel utilisateur

MAKING MODERN LIVING POSSIBLE

Danfoss Heating Solutions

living connect®

Installation and User Guide

living connect®

Danfoss Heating Solutions 3

Thank you for buying a Danfoss product UK

Zahvaljujemo se vam za nakup izdelka Danfoss

Bir Danfoss ürünü satın aldığınız için teşekkür ederiz

Hvala vam na kupnji proizvoda tvrtke Danfoss

living connect®

1. System overview................................................................ 5

2. Overview of display and control buttons ................. 5

3. Installation - step by step................................................ 6

3.1 Preparation................................................................ 6

3.2 Installation of living connect®............................. 6

3.3 Conﬁguring Danfoss LinkTM CC .......................... 7

3.4 Connecting to Danfoss LinkTM CC...................... 9

4. Technical settings..............................................................10

4.1 Reinstallation mode............................................. 10

4.2 Testing the connection.......................................10

4.3 Adjustments for over/undersized radiators 11

4.4 Reset to factory settings ....................................11

4.5 Technical data ........................................................ 12

5. Safety precautions............................................................13

6. Removing living connect®..............................................13

7. Disposal................................................................................ 13

User Guide ............................................................................... 14

Contents

Danfoss Heating Solutions 5

1. System overview

living connect® is an electronic radiator thermostat

for homes. It is controlled by a central device called a

Danfoss LinkTM CC.

Danfoss LinkTM CC can also control ﬂoor heating and

on/oﬀ switches in the building.

Please refer to the separate Danfoss LinkTM CC and

room sensor Danfoss LinkTM RS manuals for more

information.

living connect®uses Z-Wave wireless

technology. More information is

available at www.danfoss.com/living

2. Overview of display and control buttons

See page 15.

Danfoss LinkTM CC Danfoss LinkTM RS

living connect®

3. Installation - step by step

3.1 Preparation

living connect® is supplied with adapters for Danfoss

RA valves and valves with M30X1.5 (K) connections

(014G0002), two alkaline AA batteries and a 2 mm

Allen key.

Inserting the batteries

Remove the battery cover and insert

the two batteries.

Ensure that the batteries are correctly

inserted. Mmust ﬂash on the display before

installation, if this is not the case, see reinstallation

mode page 10.

3.2 Installation of living connect®

RA K

1. Start by mounting the the adapter.

2. Tighten the RA adapter using the

Allen key.

Tighten the K adapter by hand

(max. 5 Nm).

3. Screw the thermostat onto the

adapter and hand-tighten (max.

5 Nm).

4. Press and hold for approx. 3 seconds to ﬁx the thermostat.

2mm

Key

Danfoss Heating Solutions 7

3. Installation - step by step

3.3 Conﬁguring Danfoss LinkTM CC

For practical reasons, it is recommended that the

Danfoss LinkTM CC is connected to a battery pack

(014G0262).This makes the device mobile, and it can

then easily be positioned at a distance of up to 1.5 m

from each radiator thermostat that is to be added to

the system.

Remove the front cover from the Danfoss LinkTM CC

by carefully levering it oﬀ, starting with the bottom

corners. Press and hold down the setup button using

a ballpoint pen for approximately three seconds to

start the installation menu (the start-up phase may

take several minutes).

For Help, press ?in the lower right corner.

For installation without a battery pack, please see

www.danfoss.com/living.

living connect®

3. Installation - step by step

1. Conﬁgure the rooms

in which the radiator

thermostats have been

installed.

2. Add a new room.

3. Edit or enter the

room name.

Press to conﬁrm.

Note – a list of common room names

can be found using this button

Danfoss Heating Solutions 9

3. Installation - step by step

3.4 Connecting to Danfoss LinkTM CC

Each thermostat must be connected to the Danfoss

LinkTM CC. This is best done by standing beside each

thermostat with the Danfoss LinkTM CC (connected to

the recommended 014G0262 battery

pack).

1. The“Conﬁgure room”

menu is displayed.

Select “Room devices”.

2. Select “Add a device”.

3. Press Begin Registration,

and then press and release

on the thermostat.

4. Repeat for each device.

5. Once all devices have been

registered and the Danfoss LinkTM CC

is placed in its ﬁnal position, perform

a network test (see separate Danfoss

LinkTM CC manual).

living connect®

4. Technical settings

4.1 Reinstallation mode

If the thermostat has been removed from the radiator

and needs to be reinstalled (after being used), it is

necessary to activate installation mode to prevent

damage to the thermostat.

To enter installation mode:

Press until Mis displayed.

Press to withdraw the spindle.

Mﬂashes.

Reinstall the thermostat on the valve.

Press for approx. 3 seconds to exit.

Please also refer to section 6 regarding removal of the thermostat from the

radiator valve.

4.2 Testing the connection

Press for at least 3 seconds until Mis

displayed.

Press until LI is displayed.

Press to make the connection.

LI disappears when the connection is made.

If no connection can be made, the alarm

and antenna symbols ﬂash together.

Refer to“Troubleshooting”at

www.danfoss.com/living

Autres manuels pour living connect

Table des matières

Langues :

Autres manuels Danfoss Thermostat

Danfoss

Danfoss Link FT Manuel utilisateur

Danfoss

Danfoss CP10C Manuel utilisateur

Danfoss

Danfoss DEVIreg Opti Manuel utilisateur

Danfoss

Danfoss ECL Comfort 210 Manuel utilisateur

Danfoss

Danfoss RT52 Manuel utilisateur

Danfoss

Danfoss GET B-RF Mode d’emploi

Danfoss

Danfoss MBC 8000 Manuel utilisateur

Danfoss

Danfoss Eco Manuel utilisateur

Danfoss

Danfoss ECL Comfort 210 Manuel utilisateur

Danfoss

Danfoss TP7001 series Manuel utilisateur

Danfoss

Danfoss RAS-C2 Combi Manuel utilisateur

Danfoss

Danfoss TP5000 RF Si Manuel utilisateur

Danfoss

Danfoss FH-CWD Manuel utilisateur

Danfoss

Danfoss RET1001M Manuel utilisateur

Danfoss

Danfoss RET1000 MD Manuel utilisateur

Danfoss

Danfoss Icon Master Manuel utilisateur

Danfoss

Danfoss TP5001M Manuel utilisateur

Danfoss

Danfoss ECtemp 531 Manuel utilisateur

Danfoss

Danfoss FHV-R Manuel utilisateur

Danfoss

Danfoss REPI Series Manuel utilisateur

Danfoss

Danfoss ECL Comfort 310 Manuel utilisateur

Danfoss

Danfoss DEVI DEVIreg 530 Manuel utilisateur

Danfoss

Danfoss BasicPlus2 WT-DM Manuel utilisateur

Danfoss

Danfoss MTD Instructions de montage

Manuels Thermostat populaires d'autres marques

EWELLY

EWELLY EW-181 Manuel utilisateur

Prolon

Prolon T1100 Instructions d'installation

Computherm

Computherm Q20 Manuel utilisateur

Heatmiser

Heatmiser neoStat Manuel utilisateur

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manuel utilisateur

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manuel utilisateur

Saswell

Saswell SAS920XWHB-7-S-RF Mode d’emploi

Aircalo

Aircalo TFP1-ET85P2 Manuel utilisateur

Honeywell

Honeywell CM721 Manuel utilisateur

Carrier

Carrier DEBONAIR 33CS Manuel utilisateur

Lennox

Lennox iHarmony Zone Thermostat Instructions de montage

Gemtech

Gemtech GT7000 Mode d’emploi

Rollei

Rollei Smartes 45000 Manuel utilisateur

Sinope

Sinope TH1300RF Manuel utilisateur

Honeywell

Honeywell RLV4305 Manuel utilisateur

Honeywell

Honeywell Prestige 2.0 THX9421 Manuel utilisateur

NuTone

NuTone NTBZ48 Instructions d'utilisation d'origine

Stelpro

Stelpro MAESTRO ASMT402AD Manuel utilisateur

Danfoss living connect Manuel utilisateur

Manuels Thermostat populaires d'autres marques