Danfoss RET1000 MD Manuel utilisateur

Table des matières

Autres manuels Danfoss Thermostat

Danfoss

Danfoss TP9000 Mode d’emploi

Danfoss

Danfoss WP75-RF Manuel utilisateur

Danfoss

Danfoss FH-CWT Manuel utilisateur

Danfoss

Danfoss RET2000B-RF Manuel utilisateur

Danfoss

Danfoss Icon Master Manuel utilisateur

Danfoss

Danfoss Type CFR Manuel utilisateur

Danfoss

Danfoss ECL Comfort 210 Manuel utilisateur

Danfoss

Danfoss TP7000-RF Schéma de câblage

Danfoss

Danfoss EFET 160 Manuel utilisateur

Danfoss

Danfoss ECtemp 535 Manuel utilisateur

Danfoss

Danfoss TP5001RF Manuel utilisateur

Danfoss

Danfoss TP7000 Series Manuel utilisateur

Danfoss

Danfoss REP24CO Manuel utilisateur

Danfoss

Danfoss CF-RF Manuel utilisateur

Danfoss

Danfoss RAS-D2 Combi Manuel utilisateur

Danfoss

Danfoss DEVIreg Room 140F1161 Manuel utilisateur

Danfoss

Danfoss CFZ Manuel utilisateur

Danfoss

Danfoss HC75-3 Manuel d'utilisation

Danfoss

Danfoss TP9 Manuel utilisateur

Danfoss

Danfoss BasicPlus2 WT-T Manuel utilisateur

Danfoss

Danfoss ECL Comfort 210 Manuel utilisateur

Danfoss

Danfoss HC6000 Manuel utilisateur

Danfoss

Danfoss TP5000 RF Si Manuel utilisateur

Danfoss

Danfoss RET2001RF Manuel utilisateur

Manuels Thermostat populaires d'autres marques

EWELLY

EWELLY EW-181 Manuel utilisateur

Prolon

Prolon T1100 Instructions d'installation

Computherm

Computherm Q20 Manuel utilisateur

Heatmiser

Heatmiser neoStat Manuel utilisateur

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manuel utilisateur

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manuel utilisateur

Saswell

Saswell SAS920XWHB-7-S-RF Mode d’emploi

Aircalo

Aircalo TFP1-ET85P2 Manuel utilisateur

Honeywell

Honeywell CM721 Manuel utilisateur

Carrier

Carrier DEBONAIR 33CS Manuel utilisateur

Lennox

Lennox iHarmony Zone Thermostat Instructions de montage

Gemtech

Gemtech GT7000 Mode d’emploi

Rollei

Rollei Smartes 45000 Manuel utilisateur

Sinope

Sinope TH1300RF Manuel utilisateur

Honeywell

Honeywell RLV4305 Manuel utilisateur

Honeywell

Honeywell Prestige 2.0 THX9421 Manuel utilisateur

NuTone

NuTone NTBZ48 Instructions d'utilisation d'origine

Stelpro

Stelpro MAESTRO ASMT402AD Manuel utilisateur

RET1000 MD

Electronic dial setting thermostat, delayed start

User Guide

Danfoss Heating

RET1000 MD

2

For a large print version of these instructions

please call Marketing on 0845 121 7400.

Danfoss can accept no responsibility for possible errors in catalogues, brochures, and other

printed material. All trademarks in this material are property of the respective companies.

Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

Danfoss Heating 3

GB

Thank you for buying a Danfoss product GB

RET1000 MD

4

GBGB

What is a room thermostat?

... an explanation for householders. A room thermostat simply switches

the heating system on and o as necessary. It works by sensing the

air temperature, switching on the heating when the air temperature

falls below the thermostat setting, and switching it o once this set

temperature has been reached.

Turning a room thermostat to a higher setting will not make the

room heat up any faster. How quickly the room heats up depends on

the design of the heating system, for example, the size of boiler and

radiators.

Neither does the setting aect how quickly the room cools down.

Turning a room thermostat to a lower setting will result in the room

being controlled at a lower temperature, and saves energy.

Danfoss Heating 5

GBGB

The heating system will not work if a timeswitch or programmer has

switched it o.

The way to set and use your room thermostat is to nd the lowest

temperature setting that you are comfortable with, and then leave it

alone to do its job.The best way to do this is to set the room thermostat

to a low temperature – say 18°C – and then turn it up by one degree

each day until you are comfortable with the temperature. You won’t

have to adjust the thermostat further. Any adjustment above this

setting will waste energy and cost you more money.

If your heating system is a boiler with radiators, there will usually

be only one room thermostat to control the whole house. But you

can have dierent temperatures in individual rooms by installing

thermostatic radiator valves (TRVs) on individual radiators. If you don’t

have TRVs, you should choose a temperature that is reasonable for the

whole house. If you do have TRVs, you can choose a slightly higher

setting to make sure that even the coldest room is comfortable, then

prevent any overheating in other rooms by adjusting the TRVs.

Room thermostats need a free ow of air to sense the temperature,

so they must not be covered by curtains or blocked by furniture.

Nearby electric res, televisions, wall or table lamps may prevent the

thermostat from working properly.

RET1000 MD

6

GBGB

LED Indicators

Power On – Green (bottom right)

Thermostat output on – Red (top left)

Delayed Start active - Green ﬂashing (bottom right)

Delayed Start

An energy saving feature which automatically delays the heating

start time, depending on how close to set-point the ambient

room temperature already is. If the green LED ashes once every

3 seconds the delayed start function is in operation. Delayed

start can be cancelled by turning the setting dial. Delayed start

will operate again on timer control next ON time.

Danfoss Heating 7

GBGB

Turn setting dial to required temperature.

For best comfort control initially set the dial to a lower

temperature than desired, say 18°C. Then turn it up by one

degree each day until a comfortable temperature is reached.

Setting the temperature

Part No 45043v01 04/15

Danfoss Ltd

Ampthill Road

Bedford MK42 9ER

Tel: 01234 364621

Fax: 01234 219705

Email: ukheating@danfoss.com

Website: www.heating.danfoss.co.uk

VUJTD102