Danfoss Icon Master Manuel utilisateur

VUMBB102 © Danfoss | FHH | 2016.09 | 1

User Guide

Danfoss Icon™Display

Room Thermostat, 230 V

Danfoss Icon™ Display is a room thermostat especially designed for ﬂoor heating systems. It comes in

four diﬀerent designs to suit markets worldwide.

Danfoss Icon™ Display is very intuitive and easy to use. Just set your desired comfort temperature, and

the thermostat will control the room temperature in accordance with your setting.

Introduction

Wake up

the thermostat

Touch the screen to wake up Danfoss Icon™ Display.

The actual room temperature is displayed. The Heating icon is dis-

played, if the thermostat has turned on the heat.

Touch to return to the previous screen.

The screen turns oﬀ after 10 seconds without any action.

Set the temperature Wake up the thermostat

Touch or to set the desired room temperature.

The temperature ﬂashes to indicate setting is in progress.

Conﬁrm your setting by touching .

Reset to default

factory settings

Press and simultaneously for at least 3 seconds to reset Danfoss Icon™ Display to the default

factory settings.

The display toggles between and .

Conﬁrm by touching .

2 | © Danfoss | FHH | 2016.09 VUMBB102

Danfoss A/S

Floor Heating Hydronics • Ulvehavevej 61 • DK-7100 Vejle • Denmark • Phone: +45 7488 8500 • Fax: +45 7488 8501

heating@danfoss.com • www.ﬂoorheating.danfoss.com

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products

already on order provided that such alterations can be made without subsequential changes being necessary in speciﬁcations already agreed.

Wake up the thermostat.

Press for 3 seconds to open the User menus and .

Toggle the menus with or .

Choose menu with .

(To open the Installer menus and , press again for 3 seconds).

Temperature limitation

and toggles with the temperature on the screen. Set highest temperature with or .

and toggles with the temperature on the screen. Set lowest temperature with or .

Conﬁrm your choice with .

Default temperature range: 5 to 35° C.

Product ID

Production code.

Menu 3 and 4 are only relevant for the installer

Set actuator type

Choose between Normally Closed or Normally Open with or .

Conﬁrm with .

Set heat emission characteristics of the ﬂoor

Choose Fast , Medium or Slow heat emission characteristics with or .

Conﬁrm with .

Menus

Autres manuels pour Icon Master

Table des matières

Autres manuels Danfoss Thermostat

Danfoss

Danfoss living connect Z Manuel utilisateur

Danfoss

Danfoss RMT-24 Manuel utilisateur

Danfoss

Danfoss FP975 Manuel utilisateur

Danfoss

Danfoss ECL Comfort 310 Manuel utilisateur

Danfoss

Danfoss RT 115 Manuel utilisateur

Danfoss

Danfoss Type CFR Manuel utilisateur

Danfoss

Danfoss SET 3E Manuel utilisateur

Danfoss

Danfoss ECtemp 531 Manuel utilisateur

Danfoss

Danfoss HC75-1 Manuel d'utilisation

Danfoss

Danfoss CET B-RF Mode d'emploi

Danfoss

Danfoss TP75 Manuel d'utilisation

Danfoss

Danfoss living connect Manuel utilisateur

Danfoss

Danfoss TP4 Instructions de montage

Danfoss

Danfoss ECtemp 330 Manuel utilisateur

Danfoss

Danfoss ECL Comfort 310, A302 Manuel utilisateur

Danfoss

Danfoss RAS-D2 Combi Manuel utilisateur

Danfoss

Danfoss HCT-3 Manuel utilisateur

Danfoss

Danfoss Icon Master Manuel utilisateur

Danfoss

Danfoss RET 230 HC-1 Manuel utilisateur

Danfoss

Danfoss FH-CWP Manuel utilisateur

Danfoss

Danfoss ECtemp 610 Manuel utilisateur

Danfoss

Danfoss ECtemp Next Plus Manuel utilisateur

Danfoss

Danfoss TP5001 series Manuel utilisateur

Danfoss

Danfoss TP5000 si range Manuel utilisateur

Manuels Thermostat populaires d'autres marques

EWELLY

EWELLY EW-181 Manuel utilisateur

Prolon

Prolon T1100 Instructions d'installation

Computherm

Computherm Q20 Manuel utilisateur

Heatmiser

Heatmiser neoStat Manuel utilisateur

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manuel utilisateur

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manuel utilisateur

Saswell

Saswell SAS920XWHB-7-S-RF Mode d’emploi

Aircalo

Aircalo TFP1-ET85P2 Manuel utilisateur

Honeywell

Honeywell CM721 Manuel utilisateur

Carrier

Carrier DEBONAIR 33CS Manuel utilisateur

Lennox

Lennox iHarmony Zone Thermostat Instructions de montage

Gemtech

Gemtech GT7000 Mode d’emploi

Rollei

Rollei Smartes 45000 Manuel utilisateur

Sinope

Sinope TH1300RF Manuel utilisateur

Honeywell

Honeywell RLV4305 Manuel utilisateur

Honeywell

Honeywell Prestige 2.0 THX9421 Manuel utilisateur

NuTone

NuTone NTBZ48 Instructions d'utilisation d'origine

Stelpro

Stelpro MAESTRO ASMT402AD Manuel utilisateur