Danfoss RAS-D2 Combi Manuel utilisateur

INSTRUCTION

Radiator Thermostat RAS-D2Combi

BI-DIRECTIONAL VALVE WITH FLOW-SELECTABLE FEATURE

Close all radiator valves by turning

the valve cover cap clockwise.

Leave system to cool.

Start boiler/heating.

Open one valve and determine

flow direction. Which pipe heats

first?

Remove cap and turn setting ring

according to the drawings - the

setting ring is turned by hand only.

Repeat step 3 and 4 until all valves have

been set correctly. Sensor may now be

fitted or the valve cap temporarily refitted.

Setting ring

013R9399

Installation of valve

The valve is a bi-directional valve * and can be

installed horizontally or vertically in either the flow or

return pipe.

A built in flow direction selection feature can be used

to eliminate the risk of water hammer.

We recommend using a flat faced adjustable

spanner and a soft cloth to protect the chrome

surfaces when tightening up the connections.

Troubleshooting

In the unlikely event of water hammer being encoun-

tered turn the setting ring (see diagram 4) to the

other setting.

Alternatively if commissioning the whole system,

establish the flow direction through each valve using

the diagrams below.

If the flow direction needs to be changed there is no

need to remove the valve, simply turn the setting ring.

* Maximum pressure drop should not exceed 0.45 bar Danfoss DKCD 03/2005VIAQA102

Removing the Sensor

Loosen the Allen screw (3).

The sensor can now be separated from the valve.

Setting the desired room temperatures

The desired room temperature is set by turning

the head. The temperatures obtained are ap-

proximately:

Installation Guide User Guide

Do not cover the thermostat

The thermostat opens and closes as determined

by the temperature around it. Therefore the sen-

sor must never be hidden behind thick curtains,

furniture, etc. Alternatively a thermostat with

remote sensor should be used.

Lockshield valve RLV-D is included

in codes: Code no’s 013G6016 and 013G6017

Removal of

protective cap

Balancing

Positive SHUT-OFF feature:

The head can be turned past the setting (a

slight resistance will be felt) to setting "0" at which

point the water flow is shut off completely. After

also shutting the lockshield valve the radiator may

be drained and removed for maintenance and

decoration purposes.

This package contains

Sensor Chrome: 013G6170 or - Chrome/RAL 9016: 013G6176

and valve RA-FS - Chrome: 013G6282

Fitting the Sensor

1. Remove cap

from valve and

turn sensor to

2. Press the sensor

firmly onto the valve.

Sensor horizontal:

ensuring that the

scale pointer is

at top.

Sensor vertical:

ensuring that

the scale pointer is

at the front.

3. Whilst holding the

sensor firmly on the

valve secure

connection by tightening

the Allen screw using the

enclosed key.

4. Set desired room temperature.

Table des matières

Autres manuels Danfoss Thermostat

Danfoss

Danfoss RET2000 B Manuel utilisateur

Danfoss

Danfoss TP75M Manuel utilisateur

Danfoss

Danfoss 088U0215 Manuel utilisateur

Danfoss

Danfoss DEVIreg Opti Manuel utilisateur

Danfoss

Danfoss TP7001 series Manuel utilisateur

Danfoss

Danfoss 088U0212 Manuel utilisateur

Danfoss

Danfoss TPONE-RF Manuel utilisateur

Danfoss

Danfoss TP5000 RF Si Manuel utilisateur

Danfoss

Danfoss Icon Master Manuel utilisateur

Danfoss

Danfoss DEVIreg Smart Manuel utilisateur

Danfoss

Danfoss Icon Master Controller 24 V Manuel utilisateur

Danfoss

Danfoss TP9000 Manuel utilisateur

Danfoss

Danfoss ECtemp 530 Manuel utilisateur

Danfoss

Danfoss CP10C Manuel utilisateur

Danfoss

Danfoss ECL Comfort 210 Manuel utilisateur

Danfoss

Danfoss HCS6101-3 Instructions d'utilisation

Danfoss

Danfoss BasicPlus2 WT-DM Manuel utilisateur

Danfoss

Danfoss FP715Si Manuel utilisateur

Danfoss

Danfoss REP24CO1 Manuel utilisateur

Danfoss

Danfoss ECtemp Next Plus HW Manuel utilisateur

Danfoss

Danfoss FP715Si Manuel utilisateur

Danfoss

Danfoss GreenCon RC-T2 Manuel utilisateur

Danfoss

Danfoss TP9000 Manuel utilisateur

Danfoss

Danfoss RET2000B-RF + RX1-S Manuel utilisateur

Manuels Thermostat populaires d'autres marques

EWELLY

EWELLY EW-181 Manuel utilisateur

Prolon

Prolon T1100 Instructions d'installation

Computherm

Computherm Q20 Manuel utilisateur

Heatmiser

Heatmiser neoStat Manuel utilisateur

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manuel utilisateur

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manuel utilisateur

Saswell

Saswell SAS920XWHB-7-S-RF Mode d’emploi

Aircalo

Aircalo TFP1-ET85P2 Manuel utilisateur

Honeywell

Honeywell CM721 Manuel utilisateur

Carrier

Carrier DEBONAIR 33CS Manuel utilisateur

Lennox

Lennox iHarmony Zone Thermostat Instructions de montage

Gemtech

Gemtech GT7000 Mode d’emploi

Rollei

Rollei Smartes 45000 Manuel utilisateur

Sinope

Sinope TH1300RF Manuel utilisateur

Honeywell

Honeywell RLV4305 Manuel utilisateur

Honeywell

Honeywell Prestige 2.0 THX9421 Manuel utilisateur

NuTone

NuTone NTBZ48 Instructions d'utilisation d'origine

Stelpro

Stelpro MAESTRO ASMT402AD Manuel utilisateur