Danfoss 140F1143 Manuel utilisateur
www.DEVI.com
Installation Guide
DEVIreg™ Smart
Intelligent Electronic Timer Thermostat or Timer
Switch with Wi-Fi connectivity and App control
DEVIreg™ Smart
Installation Guide2
1 Introduction
DEVIreg™ Smart is an electronic programmable timer
thermostat used for controlling electrical oor heating
elements. The thermostat is designed for xed installation
only and can be used for both direct heating of the entire
room and for comfort heating of the oor. Among others,
the thermostat has the following features:
• A touchscreen display with light.
• An easy-to-follow menu-driven programming and
operation (requires an app).
1 Introduction . . . . . . . . . . . . . . . . . . . . . . 2
2 Technical Specications . . . . . . . . . . . . . . . 4
3 Safety Instructions . . . . . . . . . . . . . . . . . . 6
4 Mounting Instructions . . . . . . . . . . . . . . . . 8
5 Display Symbols . . . . . . . . . . . . . . . . . . . 13
6 Configuring . . . . . . . . . . . . . . . . . . . . . . 19
7 Settings . . . . . . . . . . . . . . . . . . . . . . . . 20
8 Warranty. . . . . . . . . . . . . . . . . . . . . . . . 23
9 Radio Equipment Directive . . . . . . . . . . . . 26
10 Disposal Instruction . . . . . . . . . . . . . . . . 27
Table of Contents
DEVIreg™ Smart
3Installation Guide
• An installation wizard with room/oor type-specic
setup (requires an app).
• Support for multiple frame systems.
• Compatible with several 3rd party NTC sensors.
• Thermostat settings can be specied before instal-
lation and imported to the thermostat using a web-
generated code (For DEVIreg™ Touch), or copied
from a thermostat in a similar installation. This
includes DEVIreg™ Touch thermostats.
• Smart access via app to thermostat settings after
installation, for easy access, setup or remote trou-
bleshooting. Thermostat/timer will continuously be
updated with newest version of software.
• DEVIreg™ Smart can be used as a switch for On/O
systems
Regarding Connectivity:
• 10 smart devices (like Smartphone or Tablet) can be
connected to 1 thermostat/switch.
• 2 smart devices can be in contact with the thermo-
stat/switch at the same time.
DEVIREG™ SMART REQUIRES WORKING Wi-Fi
TO FUNCTION .
DEVIreg™ Smart
Installation Guide4
More information on this product can also be found at:
devismart.com
2 Technical Specications
Operation voltage 220–240 V~, 50/60 Hz
Standby power
consumption
Max. 0,40 W
Relay:
Resistive load
Inductive load
Max. 16 A / 3680 W @ 230 V
Max. 1 A cos φ= 0,3
Sensing units* NTC 6,8 kOhm at 25°C
NTC 10 kOhm at 25°C
NTC 12 kOhm at 25°C
NTC 15 kOhm at 25°C (Default)
NTC 33 kOhm at 25°C
NTC 47 kOhm at 25°C
Sensing values*:
(Default NTC 15 K)
0 °C
20 °C
50 °C
42 kOhm
18 kOhm
6 kOhm
Control* PWM (Pulse Wide Modulation)
Ambient temperature 0°C to 30°C
Frost protection
temperature*
5°C to 9°C (default 5°C)
DEVIreg™ Smart
5Installation Guide
Temperature range* Room temperature: 5°C to 35°C.
Floor temperature: 5°C to 45°C.
Max. oor: 20°C to 35°C (if unrecover-
able seal is broken then up to 45°C).
Min. oor: 10°C to 35°C, only with
combination of room and oor sensor.
Sensor failure monitoring* The thermostat has a built-in
monitoring circuit, which will switch
o the heating if the sensor is
disconnected or short-circuited.
Timer functions 2 periods per day for DEVIweb™.
5 periods per day for DEVIsmart App.
All clock/date/schedule settings are
updated from the cloud.
Set-point resolution of timer is
30minutes.
Cable specication max. 1x4 mm2
Ball pressure test tem-
perature
75°C
Pollution degree 2 (domestic use)
Controller type 1C
Software class A
Storage temperature -20°C to +65°C
IP class 21
Protection class Class II -
DEVIreg™ Smart
Installation Guide6
Dimensions 85 x 85 x 20-24 mm
(in-wall depth: 22 mm)
Weight 127 g
* not relevant for switch function
Electrical safety and Electro-Magnetic Compatibility
for this product is covered by the compliance with the
EN/IECStandard“Automatic electrical controls for house-
hold and similar use”:
• EN/IEC 60730-1 (general)
• EN/IEC 60730-2-7 (timer)
• EN/IEC 60730-2-9 (thermostat)
3 Safety Instructions
Make sure the mains supply to the thermostat/switch is
turned o before installation.
Important: When the thermostat is used to control a
oor heating element in connection with a wooden oor
or similar material, always use a oor sensor and never set
the maximum oor temperature to more than 35°C.
Please also note the following:
• The installation of the thermostat
/switch
must be done
by an authorized and qualied installer according to
local regulations.
DEVIreg™ Smart
7Installation Guide
• The thermostat
/switch
must be connected to a power
supply via an all-pole disconnection switch.
• Always connect the thermostat
/switch
to continuous
power supply.
• Do not expose the thermostat
/switch
to moisture,
water, dust, and excessive heat.
• This thermostat
/switch
can be used by children aged
from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of expe-
rience and knowledge, if they have been given supervi-
sion or instruction concerning use of the appliance in
a safe way and understand the hazards involved, by a
person responsible for their safety.
• DEVIreg™ Smart can modied to work as a timer on/
o switch by downloading new software with new
functionality.
• Children should be supervised to ensure that they do
not play with the thermostat
/switch
.
• Switch is designed for permanent operation.
• Not for uorescent lamps and lament lamps.
• Cleaning and user maintenance shall not be made by
children without supervision.
• Updating to timer switch function may take up to
1hour. Same time should be expected if function is to
be rolled back to thermostat functionality.
DEVIreg™ Smart
Installation Guide8
4 Mounting Instructions
Please observe the following placement guidelines:
Place the thermostat at a suitable height on the wall
(typically 80–170 cm). Switch can be placed on free
area on the wall.
The thermostat/switch should not be placed in wet
rooms. Thermostat/switch must be placed outside
zone 2. Place it in an adjacent room and use oor
sensor only. Always place the thermostat/switch
according to local regulation on IP classes.
Do not place the thermostat on the inner side of a
poorly insulated exterior wall.
Always install the thermostat at least 50 cm from
windows and doors, due to draft, when using regulation
in: oor and room mode or room alone mode.
Do not place the thermostat in a way that it will be
exposed to direct sunlight.
DEVIreg™ Smart
9Installation Guide
Note for thermostat: A oor sensor is recommend-
ed in all oor heating applications and mandatory
to thin mats and under wooden oors to reduce the
risk of over-heating the oor.
• Place the oor sensor in a protecting plastic conduit
in the oor construction in an appropriate place,
where the oor is not exposed to sunlight or draft
from door openings.
12
≥
• Equally distant and
>2 cm from the
heating cables on
both sides.
• The conduit should
be ush with the
oor surface, coun-
tersink the conduit
if necessary and
possible.
• Route the conduit to the connection box.
• The bending radius of the conduit must be min 50 mm.
DEVIreg™ Smart
Installation Guide10
Follow the steps below to mount the thermostat/switch:
1. Unpack thermostat/switch.
2.1. Connect the thermostat according to the connection
diagram.
IP21
T30
Mains
220-240V~
50-60 Hz
Maximum
Load 16 (1) A
Sensor
NTC
Danfoss A/S
Nordborgvej 81
6430 Nordborg
Denmark
NLL
L
O
A
DN
L
O
A
D
Standby maximum 0.4 Watt
The screen of the heating
cable must be connected to
the earth conductor of the
power supply cable by using
a separate connector.
Note: Always install the oor sensor in a conduit in
the oor.
IP21
T30
Mains
220-240V~
50-60 Hz
Maximum
Load 16 (1) A
NTC
Danfoss A/S
Nordborgvej 81
6430 Nordborg
Denmark
NLL
L
O
A
DN
L
O
A
D
Standby maximum 0.4 Watt
2.2. Connect the switch ac-
cording to the connection
diagram.
3. Fasten the thermostat/switch rmly to a ush
mounted wall box or an exterior wall box by driving
Ce manuel convient aux modèles suivants
4
Table des matières
Autres manuels Danfoss Thermostat
Danfoss
Danfoss RET B-LS Manuel utilisateur
Danfoss
Danfoss ECL Comfort 210 Manuel utilisateur
Danfoss
Danfoss GET B-RF Mode d’emploi
Danfoss
Danfoss GreenCon RC-T2 Manuel utilisateur
Danfoss
Danfoss 140F1080 Manuel utilisateur
Danfoss
Danfoss RT1-RF Manuel utilisateur
Danfoss
Danfoss ECtemp 316 Manuel utilisateur
Danfoss
Danfoss 060L2150 Manuel utilisateur
Danfoss
Danfoss ECL Comfort 310 Manuel utilisateur
Danfoss
Danfoss RET 230 HCW-1 Manuel utilisateur
Danfoss
Danfoss FP735Si Manuel utilisateur
Danfoss
Danfoss DEVIreg Touch Manuel utilisateur
Danfoss
Danfoss 088L5130 Manuel utilisateur
Danfoss
Danfoss TP4 Mode d'emploi
Danfoss
Danfoss 102E7 Instructions de montage
Danfoss
Danfoss ECL Comfort 310, P318 Manuel utilisateur
Danfoss
Danfoss DEVIreg 330 Manuel utilisateur
Danfoss
Danfoss ECL Comfort 310 Manuel utilisateur
Danfoss
Danfoss TP4000 Range Manuel utilisateur
Danfoss
Danfoss ECL Comfort 210 Manuel utilisateur
Manuels Thermostat populaires d'autres marques
EWELLY
EWELLY EW-181 Manuel utilisateur
Prolon
Prolon T1100 Instructions d'installation
Computherm
Computherm Q20 Manuel utilisateur
Heatmiser
Heatmiser neoStat Manuel utilisateur
Aube Technologies
Aube Technologies TH111GFCI-NP 240 VCA Manuel utilisateur
Mars
Mars HEAT CONTROLLER IR Wireless Thermostat Manuel utilisateur
