D-Link DES-1008P Manuel utilisateur

Quick Installation Guide

DES-1008P

8-Port Fast Ethernet

Switch with 4 Port PoE

CD-ROM

with Product Document

These are the items included with your DES-1008P purchase:

NoticeBeforeSettingUptheDES-1008P

CheckYourPackageContents

8-Port 10/100 Mbps Switch with 4 Port PoE

To setup of the Switch can be performed using the following steps:

A. Install the DES-1008P in a fairly cool and dry place. See Technical Specication for the

acceptable operation temperature and humidity ranges.

B. Install the Switch in a site free from strong electromagnetic source, vibration, dust, and

direct sunlight.

C. Leave at least 10 cm of space at the left and right hand side of the Switch for ventilation.

D. Visually inspect the DC power jack and make sure that it is fully secured to the power

adapter.

Quick Installation Guide

48V,1.45A Power

Adapter

Note :

Using a power supply with a different voltage rating

will damage and void the warranty of this product.

Do not stack any device on top of the Switch.

A. Power:

Power is supplied through an external DC power adapter. Since the switch does not include

a power switch, plugging its power adapter into a power outlet will immediately power it on.

ConnectingtheDES-1008PFastEthernetSwitchwith4Port

PoEtoYourNetwork

2 3

UK: 08456 12 0003

B. Fast Ethernet Ports (Port 1~8):

These ports support network speeds of either 10 Mbps or 100 Mbps, and can operate

in half- and full- duplex transfer modes. These ports also support automatic MDI/MDIX

crossover detection, which gives the Switch true, “plug and play” capabilities. Just connect

any network cable between the Switch and the device, and The Switch will automatically

detect the settings of the device and adjust itself accordingly.

C. PoE Ports (Port 1~4 only):

These ports are PoE Enabled ports, the PoE port will automatically activate when a

compatible terminal is identied. The Switch will supply power through the Ethernet port to

the connected PoE device. For legacy devices that are not compatible, the PoE port will

not offer the power to this device. This feature allows users to freely and safely mix legacy

and PoE compatible devices on the network.

LEDIndicators

The LED Indicators will allow you to monitor, diagnose and troubleshoot any potential problem

with the switch, connection or attached devices.

A. System Power:

This indicator lights green when the Switch is receiving power, otherwise, it is off.

B. Link / Act:

This indicator lights green when a port is connected to a 10/100 Mbps station successfully

and has a good link. A blinking green indicator means that a port is transmitting or receiving

data on the network.

C. 100M Speed:

This LED indicator lights green when the port is connected to a 100 Mbps Fast Ethernet

station. The indicator lights off when the port is connected to a 10 Mbps Ethernet station

or no link.

D. PoE MAX:

Off: At least 10W of PoE power is available to connect another PoE device.

Green: When the power output to powered devices has reached or exceeded the maximum

power budget. No additional powered devices connected will be powered.

Blinking Green: Indicates at least 10W of PoE power is available again.

E. PoE Status:

Green : When the PoE powered device is connected and the port supplies power successfully.

Red : When the PoE port has failed, possibly due to

1. PoE power circuit shortage

2. Power over current: over the power current of powered device’s classication

3. Out of PoE voltage of 44 ~ 57 VDC output

Off : No PoE powered device connected.

Technical Support

Thank you for choosing D-Link products. For further information, support, product drivers and

manuals please visit the D-Link website at www.dlink.eu

Autres manuels pour DES-1008P

Table des matières

Autres manuels D-Link Changer

D-Link

D-Link DGS-1520-28MP Manuel utilisateur

D-Link

D-Link DUB-2340 Manuel utilisateur

D-Link

D-Link DKVM-440 Manuel utilisateur

D-Link

D-Link DGS-3212SR Manuel utilisateur

D-Link

D-Link DES-1024A Manuel utilisateur

D-Link

D-Link DFE-904 Manuel utilisateur

D-Link

D-Link xStack DGS-3620-28SC Manuel utilisateur

D-Link

D-Link DES-1005P Manuel utilisateur

D-Link

D-Link DGS-1210-52MP Manuel utilisateur

D-Link

D-Link DES-1018DG Manuel utilisateur

D-Link

D-Link DGS-3100-48 Manuel utilisateur

D-Link

D-Link DUB-CR200 Manuel utilisateur

D-Link

D-Link DES-F1026P-E Manuel utilisateur

D-Link

D-Link mydlink DCH-G022 Manuel utilisateur

D-Link

D-Link DGS-1008D - Switch Manuel utilisateur

D-Link

D-Link DGS-3630 SERIES Manuel utilisateur

D-Link

D-Link DCH-G020 Guide d'installation et d'utilisation

D-Link

D-Link KOMFY Manuel utilisateur

D-Link

D-Link DES-2108 Manuel utilisateur

D-Link

D-Link 1016T - DGS Switch Manuel utilisateur

D-Link

D-Link xStack DES-3200-28P Manuel utilisateur

D-Link

D-Link xStack DES-3228PA Manuel utilisateur

D-Link

D-Link DMS-1250 Series Manuel

D-Link

D-Link DGS-1248T - Switch Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Manuel utilisateur