D-Link DKVM-IP1 Manuel utilisateur

D-Link DKVM-IP1

1 Port KVM Switch

Over IP

Manual

Version 1.00

CONTENTS

1 THE QUICK INSTALLATION GUIDE 1

2 INTRODUCTION 4

2.1 When the sever is up and running 4

2.2 When the server is dead 4

2.3 Features 5

2.4 Package contents 5

2.5 Technical specifications 6

2.6 System requirement 6

2.7 Cable diagrams 7

2.8 LED Indicators 7

3 HARDWARE INSTALLATION 8

3.1 Operation overview 8

3.2 Connecting DKVM-IP1 to the host system 8

3.3 Connecting DKVM-IP1 to multi-port KVM switch 11

4 CONFIGURATION 12

4.1 Initial Configuration 12

4.1.1 Initial configuration via DHCP server 12

4.1.2 Initial configuration via serial console 13

4.1.3 Keyboard, Mouse and Video configuration 14

4.1.3.1 DKVM-IP1 switch keyboard settings 14

4.1.3.2 Remote Mouse Settings 15

4.1.3.3 Auto mouse speed and mouse synchronization 15

4.1.3.4 Host system mouse settings 15

4.1.3.5 Single and Double Mouse Mode 16

4.1.3.6 Recommended Mouse Settings 16

4.1.3.7 Video Modes 16

5 USAGE 17

5.1 Prerequisites 17

5.2 Login into the DKVM-IP1 switch and logout 18

5.2.1 Login into the DKVM-IP1 switch 18

5.2.2 Logout from the DKVM-IP1 switch 20

5.3 The Remote Console 20

5.4 Main Window 20

5.4.1 Remote Console Control Bar 21

5.4.2 Remote Console Status Line 28

6 MENU OPTIONS 29

6.1 Remote 29

6.1.1 KVM Console 29

6.1.2 Telnet Console 29

6.2 Mapping 31

6.2.1 Floppy Disk 31

6.2.2 CD ROM 32

6.2.3 Drive redirection 36

6.2.4 Options 39

6.3 User 40

6.3.1 Change Password 40

6.3.2 Users 40

6.4 Setting 41

6.4.1 User Console 41

6.4.2 Keyboard/Mouse 44

6.4.3 Video 45

6.5 Network 46

6.5.1 Network 46

6.5.2 Dynamic DNS 48

6.5.3 Security 50

6.5.4 Certificate 51

6.5.5 Serial Port 53

6.5.6 Date And Time 55

6.5.7 Event Log 56

6.6 Tools 58

6.6.1 Device Status 58

6.6.2 Event Log 59

6.6.3 Update Firmware 60

6.6.4 Unit Reset 61

7 TROUBLESHOOTING 62

8 CERTIFICATES 63

A. Pin Assignments

B. Key Codes

C. Video Modes

D. Rack mount kit installation diagram

1. The quick installation guide

Installation

DKVM-IP1 switch redirects local keyboard, mouse and video data to a remote administration console.

All data is transmitted via IP. DKVM-IP1 switch can be used in a multi administrator and multi server

environment as well. Besides, DKVM-IP1 switch is a KVM switch, which can also be used with a local

console.

DKVM-IP1 switch hardware installation

Figure 1-1 The connectors of single port DKVM-IP1 switch front and rear side

Please perform the following steps:

1. Connect the power supply to DKVM-IP1 switch

2. Connect the monitor to the DKVM-IP1 switch console side.

3. Connect the keyboard to the DKVM-IP1 switch console side.

4. Connect the mouse to the DKVM-IP1 switch console side.

5. Connect a VGA cable (15-pin HDDB Male / Male) with the Male side to both of the PC and the host

port of the DKVM-IP1 switch.

6. Connect one purple end of 3-in-one cable to the PS/2 mouse port on the computer, and the other

end of 3-in-one cable to the host PS/2 mouse port on the DKVM-IP1 Switch.

7. Connect one green end of 3-in-one cable to PS/2 keyboard port on the computer, and the other

end of 3-in-one cable to the host PS/2 keyboard port on the DKVM-IP1 switch.

8. Connect the type A connector of USB A-B cable to the host system, while using remote mass

storage control.

9. Connect Ethernet to LAN port and/or modem to DB-9 serial port, depending on how you want to

access DKVM-IP1 switch

Video modes

DKVM-IP1 switch recognizes a limited number of common video modes. When running X-Window on

the host system, please don’t use any custom mode lines with special video modes. If done so,

DKVM-IP1 switch may not be able to detect these. You are on the safe side with all standard VESA

video modes. Please refer to Appendix C for a list of all known modes.

Host

Console

Initial IP configuration

Initially the DKVM-IP1 switch network interface is configured with the parameters shown in Table 1-1.

Parameter Value

IP auto configuration DHCP

IP-Address 192.168.0.70

Net-mask 255.255.255.0

Default-Gateway none

Table 1-1: Initial configuration

If this initial configuration doesn’t meet your local requirements, you need to do the initial IP

configuration. Use one of the following ways:

1. Connect the enclosed NULL modem cable to the serial interface on the rear side. The serial

interface needs to be adjusted with the parameters shown in table 1-2:

Parameter Value

Bits/second 115200

Data bits 8

Parity No

Stop bits 1

Flow Control None

Table 1-2: Serial parameters

Use a terminal software (e.g. hyper term or minicom) to connect to DKVM-IP1 switch. Reset

DKVM-IP1 switch and immediately press < ESC >. You will see some device information and a ’=>’

prompt. Enter the command ’config’ and press < Enter >. After waiting a few moments you may

configure IP auto configuration, IP address, net mask and default gateway. Pressing < Enter >

without entering values does not change settings. The gateway value must be set to 0.0.0.0 (for no

gateway) or any other value. You will be asked if the values are correct and get a chance to correct

them. After confirming, DKVM-IP1 switch performs a reset.

2. Use a crossover Ethernet cable to connect DKVM-IP1 switch to a subnet where a DHCP server is

available. After the DHCP server has assigned an IP address to DKVM-IP1 switch you can use the

web interface to configure the device.

Web interface

DKVM-IP1 switch may be accessed using a standard JAVA enabled web browser. You may use the

HTTP protocol or a secure encrypted connection via HTTPS. Just enter the configured IP address of

DKVM-IP1 switch into your web browser.

Password admin (factory default)

Changing these settings to user specific values is strongly recommended

and can be done on the User Management page (see the Section called

Users and Groups in Chapter 6 ).

Remote Console

The Remote Console is the redirected screen, keyboard and mouse of the remote host system to

which DKVM-IP1 switch is installed. The web browser which is used for accessing DKVM-IP1 switch

has to supply a Java Runtime Environment version 1.1 or higher. However, it is strongly recommended

to install Sun JVM 1.4. The Remote Console will behave exactly the same way as if you were sitting

directly in front of the screen of your remote system. That means that both the keyboard and mouse

can be used in the usual way. Open the console by selecting the preview picture on the main site of

the HTML front end. Figure 1-2 shows the top of the Remote Console.

Figure 1-2: Top part of the Remote Console

There are some options to choose from, and the important ones are the following:

Auto Adjust button

If the video displayed is of bad quality or distorted in some way, press this button and wait a few

seconds while DKVM-IP1 switch tries to adjust itself for the best possible video quality.

Sync Mouse

Choose this option in order to synchronize the local with the remote mouse cursor. This is

especially necessary when using accelerated mouse settings on the host system. In general

there is no need to change mouse settings on the host.

Video Settings in Options Menu This opens a new window with elements to control the DKVM-IP1

switch Video Settings. You can change some values, for instance the brightness and contrast

of the picture displayed, which may improve the video quality. It is also possible to revert to the

default settings for all video modes or only the current one.

Note: At first start, if the local mouse pointer is not synchronized with

the remote mouse pointer, press the Auto Adjust Button once.

2. Introduction

Thank you for purchasing DKVM-IP1 switch. DKVM-IP1 switch can save your MONEY, TIME, SPACE,

EQUIPMENT and POWER. DKVM-IP1 switch defines a new class of remote KVM access devices.

DKVM-IP1 switch combines digital remote KVM access via IP networks with comprehensive and

integrated system management.

DKVM-IP1 switch provides convenient, remote KVM access and control via LAN or Internet. It

captures, digitizes, and compresses video signal and transmits it with keyboard and mouse signals to

and from a remote computer. DKVM-IP1 switch provides a non-intrusive solution for remote access

and control. Remote access and control software runs on its embedded processors only but not on

mission-critical servers, so that there is no interference with server operation or impact on network

performance.

Furthermore, DKVM-IP1 switch offers additional remote power management with the help of optional

available device.

DKVM-IP1 switch supports consoles consisting of PS/2 style keyboards and mouse and HDDB 15

video output. DKVM-IP1 switch will automatically detect the current video mode of the console,

however manual fine-tuning is recommended to receive the best video quality. DKVM-IP1 switch will

accept video streams up to 110 MHz dot clock. This results in a screen resolution of 1280x1024 pixels

with a frame rate of 60 Hz.

2.1. When the server is up and running

DKVM-IP1 switch gives you a full control over the remote server. The Management Console allows

you to access the remote server’s graphics, keyboard and mouse and to send special commands to

the server. You can also perform periodic maintenance of the server. Using the Console Redirection

Service, you are able to do the following:

I. Reboot the system

II. Watch the boot process.

III. Boot the system from a separate partition to load the diagnostic environment.

IV. Run special diagnostic programs.

2.2. When the server is dead

Obviously, fixing hardware defects is not possible through a remote management device.

Nevertheless DKVM-IP1 switch gives the administrator valuable information about the type of a

hardware failure. Serious hardware failures can be categorized into five different categories with

different chances to happen:

I. Hard disk failure 50%

II. Power cable detached, power supply failure 28%

III. CPU, Controller, main board failure 10%

IV. CPU fan failure 8%

V. RAM failure 4%

Using DKVM-IP1 switch, administrators can determine which kind of serious hardware failure has

occurred (See table 2-1).

Type of failure Detected by

Hard disk failure Console screen, CMOS set-up information

Power cable detached, power supply failure Server remains in power off state after power on

command has been given.

CPU Controller, main board failure. Power supply is on, but there is no video output.

CPU fan failure By server specific management software

RAM failure Boot-Sequence on boot console

Table 2-1:Host system failures and how they are detected.

2.3. Features

zManage serves around the world

zKVM (keyboard, video, mouse) access over IP and analogous telephone line (modem needed).

zBIOS level access

zSSL encryption

zNo impact on server or network performance

zAutomatically senses video resolution for best possible screen capture

zHigh-performance mouse tracking and synchronization

zPort to connect a user console for direct analogous access to KVM switch

zLocal Mouse suppression (only when using SUN’s Java Virtual Machine)

zCan be used with any standard KVM

zRemote mass storage control.

2.4. Package contents

DKVM-IP1 1 Port KVM Over IP 1 PC

User’s manual 1 PC

CD-ROM with Manual and software 1 PC

5V 2.5A DC Power Adapter 1 PC

Rack Mount Kit 1 PC

Serial cable 1 PC

USB cable in 6ft 1 PC

3-in-1 KVM cable in 3ft 1 PC

2.5. Technical specifications

Model No. DKVM-IP1 1port KVM Switch Over IP

PC Port 1

Console Port 1

PC Port Connector

(All Female Types)

PS/2 Keyboard Mini Din 6 pin

PS/2 Mouse Mini Din 6 pin

VGA HDDB 15 pin

USB Type B receptacle

Console Port Connector

(All Female Types)

Local Console: PS/2 Keyboard Mini Din 6 pin

PS/2 Mouse Mini Din 6 pin

VGA HDDB 15pin

Remote Console: RJ-45 8P8C

Serial Port (DB9 pin Male) 1

LAN port (RJ-45 8P8C) 1

10BASE-T Ethernet uses Category 3/4/5/5E/6 UTP

100BASE-T Ethernet uses Category 5/5E/6 UTP

Reset button 1

Keyboard Emulation PS/2

Mouse Emulation PS/2

VGA Resolution Local :1600 X1200 Remote : 1280 X1024

Housing Metal

Power Adapter DC 5V, 2.5A

Operation Temperature 0~50℃

Storage Temperature -20 ~ 60℃

Humidity 0~80%, Non-Condensing

Size Desktop

Weight (kg) 0.67kg

Dimension (mm) 156 X139 X27

2.6. System requirement

Item Description

Local console side One PS/2 Keyboard, one PS/2 Mouse

and one monitor

Remote Console

side

One PC or Multiple PCs are linked into

the network

Computer side One PC or Server or the console port of

KVM switch unit

2.7. Cable diagrams

PS/2 Cable:

Mini Din 6 pin Male to Male

VGA Cable:

HDB15 pin Male to Male

USB 2.0 Cable:

USB A-B cable

CAT5/5E/6 Straight Through UTP/STP Cable:

8P8C

2.8. LED Indicators:

LED Indicator Color Status Description

Solid Properly connected to the network

Green Blinking Sending or Receiving Data

Solid Connect to 100 Mbps network

Link/speed

Orange Light off Connect to 10 Mbps network

Autres manuels pour DKVM-IP1

Table des matières

Autres manuels D-Link Changer

D-Link

D-Link DGS-1210-10 Manuel utilisateur

D-Link

D-Link EasySmart DGS-1100-05 Manuel utilisateur

D-Link

D-Link xStack DGS-3120-48PC Manuel utilisateur

D-Link

D-Link DGS-3224TGR - Switch Manuel utilisateur

D-Link

D-Link DES-3226 Manuel utilisateur

D-Link

D-Link DGS-1210/ME series Manuel utilisateur

D-Link

D-Link DGS-1016D - Switch Manuel utilisateur

D-Link

D-Link DMS-105 Manuel utilisateur

D-Link

D-Link DGS-1005D - Switch Manuel utilisateur

D-Link

D-Link DGS-1010MP Manuel utilisateur

D-Link

D-Link DES-3326SRM Manuel utilisateur

D-Link

D-Link DUB-H410 Manuel utilisateur

D-Link

D-Link DQS-5000-32S Manuel utilisateur

D-Link

D-Link DKVM-4K - KVM Switch Manuel utilisateur

D-Link

D-Link xStack DGS-3120-24TC Manuel utilisateur

D-Link

D-Link KVM-440 Manuel utilisateur

D-Link

D-Link DES-7000 Series Manuel utilisateur

D-Link

D-Link DGS-1016A Manuel utilisateur

D-Link

D-Link xStack DGS-3427 Manuel utilisateur

D-Link

D-Link DES-3350SR Manuel utilisateur

D-Link

D-Link DGS-3204 - Switch - EN 100VG-AnyLAN Manuel utilisateur

D-Link

D-Link DUB-2325 Manuel utilisateur

D-Link

D-Link DUB-H4 - Hub - USB Manuel utilisateur

D-Link

D-Link DKVM-8E Comment utiliser

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Manuel utilisateur