D-Link DVG-N5402SP Manuel utilisateur

Quick Installation Guide

DVG-N5402SP

VoIP Router

Check Your Package Contents

User Manual can be found at http://www.dlink.com.sg/support/

DVG-N5402SP

VoIP Router

Ether (CAT5 UTP)

Cable

12VDC, 2A Power

Adapter

Using a power

adapter with a

different voltage rating

will damage this

product and void the

warranty.

Front Panel

Power: A steady green

light indicates a proper

connection to a power

source. A red light

indicates the power-on

self test fails or the

device is malfunction.

Prov/Alm: A blinking

light indicates the VoIP

Router can not register

with SIP Server or can

not get the IP address.

A blinking light also

indicates the VoIP

Router is attempting to

connect with the

Provisioning server.

Once the service

connects, the LED will

turn off. The LED will

light solid red if the

self-test or boot-up

fails.

when the VoIP Router is connected to a VoIP service provider. The

LED will flash if not connected to a service provider.

WLAN: A steady light indicates a wireless connection. A blinking

light indicates that the VoIP Router is receiving or transmitting from

or to the wireless network.

WAN: When a connection is established the LED will light up solid.

The LED will blink to indicate the activity. If the LED does not light

up when a cable is connected, verify the cable connections and

ensure that your devices are powered on.

Hardware Overview

LAN: When a connection is established the LED will light up solid

on the appropriate port. The LEDs will blink to indicate the activity.

If the LED does not light up when a cable is connected, verify the

cable connections and ensure that your devices are powered on.

USB: When a connection is established the LED will light up solid.

The LED will blink to indicate the activity. If the LED does not light

up when a USB device is connected, verify the USB connection

and ensure that the devices are powered on.

Phone: This LED displays the VoIP status and hook or ringing

activity on the phone port that is used to connect your normal

telephone(s). If a phone connected to a phone port is off the hook

or in use, this LED will light solid. When a phone is ringing, the

indicator will blink.

Line: Light on means the line is in use (off-hook), and vice versa.

WPS: When a WPS negotiation is established the LED will light up

solid. The LED will blink to indicate the activity. If the LED does not

light up when the WPS negotiation is failed or is not established.

Rear Panel

1. Antenna: Connect to a wireless network.

2. Phone Port (1-2): Connect to your phones using standard phone

cabling (RJ-11).

3. USB: USB host 2.0 port, for connecting to another USB device to

supply some value-added application.

4. LAN: Connect to your Ethernet enabled computers using Ethernet

cabling.

5. WAN: Connect to your broadband modem using an Ethernet cable.

6. Power Receptor: Receptor for the provided power adapter.

Hardware Overview

(continued)

A. Insert one end of the Ethernet cable into the Ethernet (LAN)

port on the back panel of the DVG-N5402SP and the other end of the

cable to an Ethernet Adapter or available Ethernet port on your

computer.

B. Insert one end of the Ethernet cable into the WAN port on the back of

the DVG-N5402SP and the specify port of the ONT or the LAN port

of your router.

C. Insert a telephone cable into the Phone port, and then connect the

cable to your telephone.

Installing the Hardware

D. Connect the power adapter to the power input at the back panel of

the DVG-N5402SP and then plug the other end of the power adapter

to a wall outlet or power strip. On the front of the device, the Power

LED will turn On to indicate proper operation.

E. Check the LED display on the front of the VoIP Wireless Router to

confirm that the connections have been made.

Installing the Hardware (continued)

After the installations are completed, your network should look similar to

the diagram below.

Hardware configuration is complete! If your VoIP service is already activated, you

can make phone calls now.

Installing the Hardware (continued)

ONT

Configuration

To access the web-based configuration utility, open a web browser such

as Internet Explorer and enter the IP address of the DVG-N5402SP.

Open your Web browser and

type http://192.168.0.1 into the

URL address box. Press the

Enter or Return Key.

Click Login to enter Web Site.

The default username and

password: admin/password

Configuration (continued)

The username of ADMIN and USER

have been defined and locked by

default. It is highly recommended to

create a login password to keep

your router secure.

Click Apply.

By Default, the wireless SSID will be

“DVG-N5402SP-XXXXXX”

And “XXXXXX” will be the last 6

digits of your MAC address located

below the device.

Configuration (continued)

Enter the SSID to name your own

wireless network. All devices must

have the same SSID to

communicate on the wireless

network. Select a wireless channel.

Select the 802.11 Mode of your

network which can work in different

speed of wireless connection.

Click Apply.

Select your wireless security modes:

None, WEP, WPA only, WPA2

only or WPA/WPA2 Mixed for your

wireless network.

Click Apply

By default, there are no wireless

securities but by changing to

WPA/WPA2 Mixed, the Pre-

Shared Key will be the serial

number of your router.

Autres manuels pour DVG-N5402SP

Table des matières

Autres manuels D-Link Routeur réseau

D-Link

D-Link DIR-815 Manuel utilisateur

D-Link

D-Link DVG-7062S Manuel utilisateur

D-Link

D-Link DIR-610N Manuel utilisateur

D-Link

D-Link SharePort DIR-825 Manuel utilisateur

D-Link

D-Link TM DES-6500 Manuel utilisateur

D-Link

D-Link DIR-857 Manuel utilisateur

D-Link

D-Link DIR-878/MT Manuel utilisateur

D-Link

D-Link DXS-1210-12TC Manuel utilisateur

D-Link

D-Link DI-106 Series Manuel utilisateur

D-Link

D-Link DFL-1500 Manuel utilisateur

D-Link

D-Link DIR-825/AC Manuel utilisateur

D-Link

D-Link DWR-926 Manuel utilisateur

D-Link

D-Link xStack DES-3810 Manuel

D-Link

D-Link DWR-953 Manuel utilisateur

D-Link

D-Link DI-2000 Series Manuel utilisateur

D-Link

D-Link DSL-2650U Manuel utilisateur

D-Link

D-Link DSL-321B Manuel utilisateur

D-Link

D-Link DIR-860L Manuel utilisateur

D-Link

D-Link DIR-860L Manuel utilisateur

D-Link

D-Link DSL-2740B Manuel utilisateur

D-Link

D-Link DWR-910 Manuel utilisateur

D-Link

D-Link DIR-2680 Manuel utilisateur

D-Link

D-Link DWR-712 Manuel utilisateur

D-Link

D-Link Whole Home Router 1000 Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité