D-Link DXN-W224 Manuel utilisateur

Quick Start Guide

WECB

Version 1.0

Wireless Ethernet Coaxial Bridge

DXN-W224 Quick Start Guide

WECB

Minimum Requirements

•Windows® 8, 7, Vista®, or XP; Mac OS® X (10.5 or higher)

•An installed Ethernet adapter (10/100/1000)

•Any device that has a WiFi adapter. I.E. Xbox, IPad, IPhone

Package

Contents

Wireless Ethernet Coaxial Bridge (WECB) COAX Cable

Power Adapter Stand Splitter

DXN-W224 Quick Start Guide

Front Panel

Power MoCA

2.4

GHz

LAN1

LAN2

5 GHz

Power LED

A solid light indicates the device is receiving power.

MoCA LED

A solid light indicates the device has formed a network over the coaxial

cable with at least one other MoCA device (Wireless Gateway 2). The LED

will blink during data transmission.

2.4 GHz LED

A solid light indicates the 2.4 GHz Wi-Fi network is ready.

5 GHz LED

A solid light indicates the 5 GHz Wi-Fi network is ready.

LAN LEDs (1-2)

A solid light indicates a connection on the Ethernet port. The LED will blink

during data transmission.

DXN-W224 Quick Start Guide

Back

Panel

Reset Button

LAN Ports

Cable Out

Cable In

Power Port

Reset Button

Press and hold the reset button with a paper clip for 15 seconds to reset the

WECB to the factory default settings. Do not unplug the power during this

process.

LAN Ports (1-2)

Connect Ethernet devices such as computers, media players, and game

consoles using a CAT5 cable (not included)

Cable Out

Connect one end of thecoaxial cable to the Cable Out port and the other

end to your Wireless Gateway 2 or the COAX IN port on your set-top box.

Cable In

Connect one end of anothercoaxialcable to the Cable In port and the other

end to the cable outlet on the wall.

Power Port

Connect the supplied power adapter to power your WECB.

DXN-W224 Quick Start Guide

Hardware Installation

1. Power

Plug the WECB’s power adapter into an AC wall outlet or power strip.

Note: Power source is confirmed when the Power LED indicator on the front panel is lit.

2. Connect the Ethernet Cable

Connect one end of the included Ethernet cable to the LAN port located on the WECB’s back

panel and attach the other end to your network or computer.

3. Connect the Coaxial Cable

Connect one end of the coaxial cable to the Cable port located on the WECB’s back panel

and attach the other end to your cable outlet inside the house or directly to the Wireless

Gateway 2.

Note: There is no MoCA mode switch for configuration on the WECB.

DXN-W224 Quick Start Guide

Software Installation

D-Link WECB has a web-based configuration utility to allow control over certain coaxial

networking parameters. The unit is shipped with default parameters that will allow operation on

most coaxial network without any additional configuration.

Note: If you are connecting to a Wireless Gateway 2, it will automatically configure the settings on

your WECB.

However, if a special network security password is required or if a specific channel operating

frequency is required, then the default parameters will need to be

modified.

Use the Wireless

Gateway’s web interface (Admin Tool) at http://10.0.0.1 to make any changes.

Web-based Configuration Utility

To access WECB’s configuration utility, open a web-browser (such as Internet Explorer) and

enter the default IP address of the WECB (192.168.0.50). If you are connected to the Wireless

Gateway 2 via Coax cable, then you will have to log in using the IP address assigned by the DHCP

server.

Example: (http://10.0.0.x) where“x”is something other than“1”

Select “User”from the User Name drop-down menu and then enter your password (“Null” by

default):

Note: The WECB will configure itself automatically when connected to a compatible Wireless

Gateway 2.

Autres manuels pour DXN-W224

Table des matières

Autres manuels D-Link Routeur réseau

D-Link

D-Link DIR-825/AC Manuel utilisateur

D-Link

D-Link DSL-2640U Manuel utilisateur

D-Link

D-Link DHP-601AV Manuel utilisateur

D-Link

D-Link GO-DSL-N151 Manuel utilisateur

D-Link

D-Link DIR-513A Manuel utilisateur

D-Link

D-Link DES-3010F Manuel utilisateur

D-Link

D-Link Xtreme N L7-N-R2000 Manuel utilisateur

D-Link

D-Link DIR-615 - Wireless N Router Manuel utilisateur

D-Link

D-Link DIR-505 Manuel utilisateur

D-Link

D-Link DIR-615 - Wireless N Router Manuel utilisateur

D-Link

D-Link DSL-2540U Manuel utilisateur

D-Link

D-Link DIR-615 - Wireless N Router Manuel utilisateur

D-Link

D-Link DXN-221 - HD MediaBridge Coax Network... Manuel utilisateur

D-Link

D-Link DSL-2500U Manuel utilisateur

D-Link

D-Link xStack DES-3810 Manuel

D-Link

D-Link DIR-815 Manuel utilisateur

D-Link

D-Link DIR-600 Manuel utilisateur

D-Link

D-Link DSL-2640B Manuel utilisateur

D-Link

D-Link DSL-3900 Manuel utilisateur

D-Link

D-Link DIR-822-US Manuel utilisateur

D-Link

D-Link Cobra DSL-5300 Manuel utilisateur

D-Link

D-Link DWR-932 Manuel utilisateur

D-Link

D-Link DWR-921 Manuel utilisateur

D-Link

D-Link RANGEBOOSTER N 650 Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité