D-Link DSH-G300 Manuel utilisateur

DSH-G300 D-Link Corporation

Page 1

DSH-G300

Smart Hub

Manual

Version 1.0

Dec 7th, 2017

DSH-G300 D-Link Corporation

Page 2

Table of Contents

1. PRODUCT DESCRIPTION..................................................................................3

2. APPEARANCE .....................................................................................................3

3. INSTALLATIONS & CONFIGURATIONS.......................................................4

DSH-G300 D-Link Corporation

Page 3

1. PRODUCT DESCRIPTION

The DSH-G300 is a ZigBee to Ethernet gateway device that uses a generic

hardware design and can be deployed as different versions to fulfil different

applications.

2. APPEARANCE

Top

LED: Status indicator

Wireless button: pairing/un-pairing

Rear

LAN port

Micro USB: Power jack, Vdc : 5V/2.A

USB port

Bottom

Reset button

DSH-G300 D-Link Corporation

Page 4

Mounting installation

3. INSTALLATIONS & CONFIGURATIONS

how to build firmware by GPL

Install tools

Install fedora linux 22, and make sure you can connect to

internet.

Run command as below (ps : switch to root permission):

#yum -y update

#yum -y install gcc

#yum -y install zlib-devel openssl-devel

#yum -y install gcc-c++

#yum -y install bison

#yum -y install flex

#yum -y install ncurses-devel

#yum -y install fakeroot

#yum -y install patch

The workstation we used to build the image is:

OS Version: Fedora 22 (32-bit version on AMD or Intel system)

OS Kernel Version: 4.1.6-200.fc22.i686

GCC Version: 5.3.1 20160406 (Red Hat 5.3.1-6)

(You may use other Linux distribution as your workstation but

DSH-G300 D-Link Corporation

Page 5

no guarantee of a successful build.)

Setup Build Enviornment($means command)

1) please login as a normal user such as john, and copy the

gpl file to normal user folder, such as the folder /home/john

2) $cd /home/john

3) $tar zxvf DSHG300_A1_GPLv100b01.tar.gz

4) $cd DSHG300_A1_GPLv100b01

5) $su (ps : switch to root permission)

6) #mkdir /opt (if "/opt" is already exist, skip this step)

7) #cp -rf buildroot-gcc463 /opt

8) #exit (ps : switch back to normal user permission)

9) $source ./setupenv

Building the image

$make

===================================================

You are going to build the f/w images.

Both the release and tftp images will be generated.

===================================================

Do you want to build it now ? (yes/no) : yes

DSH-G300 D-Link Corporation

Page 6

4) After make successfully, you will find the image file

in ./images/.

Tips: If there are some options need to be selected,

please input "enter" key to execute the default action.

How to install file into firmware

Copy file into rootfs then rebuild gpl firmware by “make

release”.

$cd DSHG300_A1_GPLv100b01

$cp ~/test_lib rootfs/lib

$make release

Tips: If there is not rootfs, please using full steps

to build firmware firstly.

How to add a mtd partition

enable jffs2 support in kernel config

Before this step, please using full steps to build firmware

DSH-G300 D-Link Corporation

Page 7

firstly.

Run kernel menuconfig and select jffs2 option, then save it.

$ cd DSHG300_A1_GPLv100b01/kernels/MT7688_linux-2.6.36.x

$ make menuconfig

File systems --->

Miscellaneous filesystems --->

<*> Journalling Flash File System v2 (JFFS2) support

(0) JFFS2 debugging verbosity (0 = quiet, 2 = noisy)

[*] JFFS2 write-buffering support

[ ] JFFS2 summary support (EXPERIMENTAL)

[ ] JFFS2 XATTR support (EXPERIMENTAL)

[ ] Advanced compression options for JFFS2

<*> Compressed ROM file system support (cramfs)

Copy kernel config into boards folder.

$ cp .config ../../boards/wrgn104/kernel.config

add mtd partition

Modify mtd partition map in file:

DSHG300_A1_GPLv100b01/kernels/MT7688_linux-

2.6.36.x/drivers/mtd/ralink/ralink_bbu_spi.c

This is a sample which add a mtd partition named by “test”,

and size of this partition is 320k:

ralink_bbu_spi.c

Re-bulid gpl firmware and upgrade gpl firmware into device.

DSH-G300 D-Link Corporation

Page 8

mount mtd partition

After firmware upgrade, show all mtd partitions by below

command:

$ cat proc/mtd

For this example, “data”mtd partition is mtd6 , it’s means

that dev path of “data”mtd partition is /dev/mtdblock/6.

Use below command to mount mtd partition “test”with jffs2

type.

$ mount -t jffs2 /dev/mtdblock/6 /data

Tips1: mtd partition must larger than 320k.

Tips2: we can add mtd partition by reduce “upgrade”

mtd partition size, but upgrade is used to upgrade firmware.

So we must make sure size of “upgrade”mtd partition always

larger than firmware size.

Tips3: in gpl v100b04, we auto mount the ”data”mtd

partition to /data while device boot up.

How to upgrade firmware by web

Enter URL http://192.168.0.50/ and login it.

DSH-G300 D-Link Corporation

Page 9

Default password is null(“”).

Enter firmware upgrade page.

Select firmware file and press Upload button.

DSH-G300 D-Link Corporation

Page 10

How to use telnet and tftp

How to use telnet

Telnet is enable as default,use tool to access it. Example is

Microsoft cmd tool. Device default ip is 192.168.0.50.

How to use tftp

Tftp can transfer a file from/to tftp server.

This is an exanple(tftp server ip is 192.168.0.38).

$ #get file from tftp server

$ tftp -r get_file.txt -l get_file.txt -g 192.168.0.38

$ #put file from tftp server

$ tftp -r put_file.txt -l put _file.txt -g 192.168.0.38

Table des matières

Autres manuels D-Link Porte

D-Link

D-Link DSA-3600 Manuel utilisateur

D-Link

D-Link Verizon DSL-2750B Manuel utilisateur

D-Link

D-Link DG-102S Manuel utilisateur

D-Link

D-Link DI-701 iShare Guide de démarrage rapide

D-Link

D-Link DFL-M510 Manuel utilisateur

D-Link

D-Link DG-102SH Manuel utilisateur

D-Link

D-Link DVG-3004S Manuel utilisateur

D-Link

D-Link DVG?6001G Manuel utilisateur

D-Link

D-Link DPN-1021G Manuel utilisateur

D-Link

D-Link DVG-5112S Manuel utilisateur

D-Link

D-Link DFL-M510 Manuel utilisateur

D-Link

D-Link DVG-7022S Manuel utilisateur

D-Link

D-Link DVG-6004S Manuel utilisateur

D-Link

D-Link DVG-6004S Manuel utilisateur

D-Link

D-Link DVG?6001G Manuel utilisateur

D-Link

D-Link DVG-2004S Manuel utilisateur

D-Link

D-Link DIV-140 Manuel utilisateur

D-Link

D-Link DSA-3600 Manuel utilisateur

D-Link

D-Link DVG-7044S Manuel utilisateur

D-Link

D-Link DVG-2016S Manuel utilisateur

D-Link

D-Link DVA-G3810BN Manuel utilisateur

D-Link

D-Link DBG-2000 Manuel utilisateur

D-Link

D-Link DPN-1021G Manuel utilisateur

D-Link

D-Link DG-102S Manuel utilisateur

Manuels Porte populaires d'autres marques

LST

LST M500RFE-AS Manuel utilisateur

Kinnex

Kinnex Media Gateway Manuel utilisateur

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuel utilisateur

Telsey

Telsey CPVA 500 - SIP Manuel utilisateur

RTA

RTA 460A-NNA4 Fiche technique

Shaw

Shaw Gateway HDPVR Manuel utilisateur

ABB

ABB VSN900 Guide de démarrage rapide

Commander

Commander Pulse Manuel utilisateur

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuel utilisateur

NETGEAR

NETGEAR C6300BD Manuel utilisateur

Amit

Amit CDW531AM Manuel utilisateur

HMS

HMS Netbiter EasyConnect EC150 Manuel utilisateur

Huawei

Huawei EchoLife HG620 Manuel utilisateur

AT&T

AT&T U-verse 3801 Manuel d'utilisation et d'entretien

Logic IO

Logic IO RTCU MX2 turbo Manuel utilisateur

Suttle

Suttle MediaMAX MXM-521 Manuel utilisateur