D-Link DVG-5004S Manuel de l'opérateur

their respective holders. Software and specifications subject to change without notice. DVG-5004S FXS

VoIP Gateway

Quick Installation Guide

DVG-5004S

VoIP Gateway

CD-ROM

which includes

the User

Manual

Phone Cord X4 Ether

(CAT5 UTP)

Cable

Power

Adaptor

Using a power

supply with a

different

voltage rating

will damage

this product

and void the

warranty

Power Power LED. A steady light indicates a proper connection to a

power source.

Prov./Alm.

A blinking light indicates the VoIP Gateway is attempting to

connect with the Provisioning server or DVG can’t get IP

from DHCP or PPPoE Server. Once the service connects,

the LED will turn off. The LED will light solid red if the self-

test or boot-up fails.

Reg.

The Reg. LED will turn on when the VoIP Gateway is

connected to a VoIP service provider. The LED will blinking if

not connected to a service provider.

WAN

When a connection is established the 10 or 100 LED will

light up solid. The LED will blink to indicate activity. If the 10

or 100 LED does not light up when a cable is connected,

verify the cable connections and make sure your devices are

powered on.

LAN

When a connection is established the 10 or 100 LED

(bottom) will light up solid on the appropriate port. The LEDs

will blink to indicate activity. If the 10 or 100 LED does not

light up when a cable is connected, verify the cable

connections and make sure your devices are powered on.

Phone

Green Blinking – FXS is alerting (ringing) for an inbound call.

Green Solid – The line is in use.

Red Solid – As users execute “Status-> FXS Line

Diagnostic” and there is some error on the FXS port.

Reset

Use Reset Button to restore factory default settings:

zPress and hold the reset button for 6 seconds and

Rrov./Alm. Indicator will be blinking fast

zRelease the reset button. Factory settings will be

restored.

Hardware Overview

Rear Panel

1. Phone Port (1-4): Connect to your phones using standard phone

cabling (RJ-11).

2. LAN: Connect to your Ethernet enabled computers using Ethernet

cabling.

3. WAN: Connect to your broadband modem using an Ethernet cable.

4. Ground: A conducting connection with the earth. Connect with the

ground so as to make the earth a part of an electrical circuit using

metal wire.

5. Power Receptor: Receptor for the provided power adapter.

6. Power Switch: Press it down to turn on DVG.

A. Insert one end of the Ethernet cable into the Ethernet (LAN) port on

the back panel of the DVG-5004S and the other end of the cable to an

Ethernet Adapter or available Ethernet port on your computer.

B. Insert one end of the Ethernet cable into the WAN port on the back of

the DVG-5004S and the other into your cable/DSL modem or the LAN

port of your router.

C. Insert a telephone cable into the Phone port, and then connect the

cable to your telephone.

Installing the Hardware

D. Connect the power adapter to the power input at the back panel of the

DVG-5004S and then plug the other end of the power adapter to a wall

outlet or power strip. Then press down Powr Switch. On the front of the

device, the Power LED will turn On to indicate proper operation.

E. Check the LED display on the front of the VoIP Router to confirm that

the connections have been made.

After the installations are completed, your network should look similar to

the diagram below.

Hardware configuration is complete! If your VoIP service is already activated, you

can make phone calls now.

Installing the Hardware (continued)

Configuration

To access the web-based configuration utility, open a web browser such as

Internet Explorer and enter the IP address of the DVG-5004S.

Click Next.

Open your Web browser and type

http://192.168.8.254 into the URL

address box. Press the Enter or

Return Key.

Click Lo

in to enter Web Site.

Click Setu

Wizard.

Configuration (continued)

It is highly recommended to create

a login ID and password to keep

your gateway secure.

Enter a NTP server or use the

default server.

Click Next.

Configuration (continued)

Select your Internet connection

type:

DHCP – Most Cable ISPs or if

you are connecting the DVG-

5004S behind a router.

Static IP – Select if your ISP

supplied you with your IP

settings.

PPPoE – Most DSL ISPs.

PPTP – Select if required by

your ISP.

Select Manual to manually enter

IP address of DNS or select

Auto if DNS is assigned by ISP.

Click Next.

Configuration (continued)

by clicking Enable support of

SIP Proxy Server. Enter Proxy

Server IP/Domain and Port.

The Outbound Proxy Support

is optional. To register, please

click on the Outbound Proxy

Support check box and enter

Outbound Proxy IP/Domain

and Port in it.

Registration by phone line: enter

Number, User ID/Account and

Password supplied by your

ITSP. Click on the Register

check box to register to Proxy

Server.

Setup is finished. Check the

summary of your settings. To make

new settings effective, you must

click on the Restart button to reboot

the DVG-5004S.

Click Restart.

Click Next.

Technical Support

You can find software updates and user documentation on the D-Link

website.

Tech Support for customers within United States:

D-Link Technical Support over the Telephone:

(800)326-1688

D-Link Technical Support over the Internet:

http://support.dlink.com

email:[email protected]

Autres manuels pour DVG-5004S

Table des matières

Autres manuels D-Link Porte

D-Link

D-Link DVG-7022S Manuel utilisateur

D-Link

D-Link DI-707 Manuel utilisateur

D-Link

D-Link DVG-2004S Manuel d'instructions

D-Link

D-Link DVG-4088S Manuel utilisateur

D-Link

D-Link DI-701 iShare Manuel utilisateur

D-Link

D-Link DVA-G3810BN Manuel utilisateur

D-Link

D-Link DVG-5112S Manuel utilisateur

D-Link

D-Link Airspot DSA-3100 Manuel utilisateur

D-Link

D-Link DVX-3500 Manuel utilisateur

D-Link

D-Link DFL-M510 Manuel utilisateur

D-Link

D-Link DVG-2004S Manuel utilisateur

D-Link

D-Link VoIP Wireless Router DVG-G5402SP Manuel utilisateur

D-Link

D-Link DG-102S Manuel utilisateur

D-Link

D-Link DVG-2032 Manuel utilisateur

D-Link

D-Link DVG-2032S Manuel utilisateur

D-Link

D-Link DVG-3004S Manuel utilisateur

D-Link

D-Link DVG-7044S Manuel utilisateur

D-Link

D-Link DVG-3032S Manuel utilisateur

D-Link

D-Link DG-102S Manuel utilisateur

D-Link

D-Link DBG-2000 Manuel utilisateur

D-Link

D-Link DVG-1120M Manuel utilisateur

D-Link

D-Link DVG-6004S Manuel utilisateur

D-Link

D-Link DG-102S Manuel utilisateur

D-Link

D-Link DPG-2000W - AirPlus G Wireless Presentation... Manuel utilisateur

Manuels Porte populaires d'autres marques

LST

LST M500RFE-AS Manuel utilisateur

Kinnex

Kinnex Media Gateway Manuel utilisateur

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuel utilisateur

Telsey

Telsey CPVA 500 - SIP Manuel utilisateur

RTA

RTA 460A-NNA4 Fiche technique

Shaw

Shaw Gateway HDPVR Manuel utilisateur

ABB

ABB VSN900 Guide de démarrage rapide

Commander

Commander Pulse Manuel utilisateur

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuel utilisateur

NETGEAR

NETGEAR C6300BD Manuel utilisateur

Amit

Amit CDW531AM Manuel utilisateur

HMS

HMS Netbiter EasyConnect EC150 Manuel utilisateur

Huawei

Huawei EchoLife HG620 Manuel utilisateur

AT&T

AT&T U-verse 3801 Manuel d'utilisation et d'entretien

Logic IO

Logic IO RTCU MX2 turbo Manuel utilisateur

Suttle

Suttle MediaMAX MXM-521 Manuel utilisateur