D-Link DG-102S Manuel utilisateur

Contents of Package:

DG-102S VoIP Station Gateway

Power adapter

CD-ROM, including User’s Manual

Quick Install Guide

For more information regarding cabling, please see the appendix at the back of this

guide or refer to the User’s Manual on the CD-ROM.

Connecting the DG-102S VoIP Gateway

to your network

When you have completed the steps in this installation guide, your

connected network may look similar to this:

Plug in the power supply as shown.

The Power LED will turn “ON” to indicate

proper operation.

Starting with the WAN port, on the left in the picture below, connect

the Cable or DSL modem to the gateway using an Ethernet cable.

Next, connect the PC or switch to the LAN port. Finally, connect your

regular telephone(s) directly into either of the two Phone ports using

RJ-11 phone cable. (Connect the Line port to a standard telephone

wall outlet for PSTN Life Line function)

Setting Up a Connection

In order to use a web browser to configure the VoIP gateway, you

must be sure it has a valid Ethernet connection from the PC to the

LAN port.

The VoIP gateway comes with a default IP address of 10.1.10.4.

Make sure the PC is in the same IP range as the VoIP gateway. You can do this by

changing the IP address of the PC as shown.

Go to Start>Settings>Control Panel>Double Click on Network Neighborhood

-2-

Configuring the VoIP Gateway using a Web Browse

Once this is done, run any browser on the PC and enter the default

address of the VoIP as shown below.

Click on the “Login to the web-based management module” button.

The following window will be displayed:

Initially, the VoIP gateway does not have a Username or Password.

To log in, click “OK.”

-3-

The following window will be displayed:

To begin configuring the device, click

on the “Config IP” folder on the left-

hand side of the window (shown at

right.)

-4-

Next, click on “Config Device IP Address.” The following window

will appear. Click on the Save button at the bottom right of the

window to save the settings.

Under PPPoE settings for DSL users: enter the User Name and

Password provided by your ISP.

Click on “Configure Call Agent IP Address. Enter the Notify Entity

and RGW Name provided by your ISP.

-5-

Dynamic IP Assignment

Enter the desired information in the fields below.

Click “Save.”

NAT Configuration

Enter the desired information in the fields below.

Click “Save.”

-6-

Administration Management

To add or change a User Account, fill in the appropriate information

in the “User Name,” “Old Password” (if applicable), “New

Password,”and “Confirm New Password” fields.

Click “Save.”

Save Changes

After the settings have been saved to NV-RAM, they will become the

default settings for the device, and they will be used every time it is

powered on, reset or rebooted. The only exception to this is a factory

reset, which will clear all settings and restore them to their initial

values, which were present when the device was purchased.

Click on the Save Configuration button at the bottom of the window

to save the system settings to NV-RAM.

-7-

Appendix

1. To connect your gateway (WAN port) directly to cable or DSL modem use

“Straight-through cable.”

2. To connect your gateway (LAN port) directly to your computer or switch

(Uplink port) use “Straight-through cable.”

3. A “Serial cable” is used to connect your PC to the gateway for “Command

line Configuration.” (Please refer to the User’s Manual for more details.)

4. To connect your normal telephones directly to your gateway (Phone ports)

using “RJ-11 phone cable”. (The third port on the right labeled “Line” is for

PSTN Life Line function. It’s for connecting to a standard telephone wall

outlet through an approved No. 26 AWG or larger telecommunications line

cord.)

Building Networks for People

Autres manuels pour DG-102S

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels D-Link Porte

D-Link

D-Link DVG-6004S Manuel utilisateur

D-Link

D-Link DPN-1021G Manuel utilisateur

D-Link

D-Link DRO-210i Manuel utilisateur

D-Link

D-Link DG-102S Manuel utilisateur

D-Link

D-Link DVG-2004S Manuel utilisateur

D-Link

D-Link DSA-3110 Manuel utilisateur

D-Link

D-Link DVG-5004S Manuel utilisateur

D-Link

D-Link DVG-5004S Manuel utilisateur

D-Link

D-Link DVG-3032S Manuel utilisateur

D-Link

D-Link DBG-2000 Manuel utilisateur

D-Link

D-Link DVG?6008G Manuel utilisateur

D-Link

D-Link DVG-5008S Manuel utilisateur

D-Link

D-Link AirSpot DSA-3200 Manuel utilisateur

D-Link

D-Link DG-102S Manuel utilisateur

D-Link

D-Link Airspot DSA-3100 Manuel utilisateur

D-Link

D-Link DPN-1021G Manuel utilisateur

D-Link

D-Link DG-102SP Manuel utilisateur

D-Link

D-Link DHM-401T Manuel utilisateur

D-Link

D-Link DVG-2016S Manuel utilisateur

D-Link

D-Link DI-701 iShare Guide de démarrage rapide

D-Link

D-Link DVG-2004S Manuel d'instructions

D-Link

D-Link Airspot DSA-3100 Manuel utilisateur

D-Link

D-Link Verizon DSL-2750B Manuel utilisateur

D-Link

D-Link DVG-3004S Manuel utilisateur

Manuels Porte populaires d'autres marques

LST

LST M500RFE-AS Manuel utilisateur

Kinnex

Kinnex Media Gateway Manuel utilisateur

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuel utilisateur

Telsey

Telsey CPVA 500 - SIP Manuel utilisateur

RTA

RTA 460A-NNA4 Fiche technique

Shaw

Shaw Gateway HDPVR Manuel utilisateur

ABB

ABB VSN900 Guide de démarrage rapide

Commander

Commander Pulse Manuel utilisateur

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuel utilisateur

NETGEAR

NETGEAR C6300BD Manuel utilisateur

Amit

Amit CDW531AM Manuel utilisateur

HMS

HMS Netbiter EasyConnect EC150 Manuel utilisateur

Huawei

Huawei EchoLife HG620 Manuel utilisateur

AT&T

AT&T U-verse 3801 Manuel d'utilisation et d'entretien

Logic IO

Logic IO RTCU MX2 turbo Manuel utilisateur

Suttle

Suttle MediaMAX MXM-521 Manuel utilisateur