D-Link DPN-1021G Manuel utilisateur
Quick Installation Guide
DPN-1021G
GPON ONT VoIP Gateway with 1 GPON Port, 1
10/100/1000Base-T Port, 1 10/100Base-TX
Port, and 1 FXS Port
DPN-1021G Quick Installation Guide
BEFORE YOU BEGIN
Delivery Package
•GPON ONT VoIP gateway DPN-1021G
•Power adapter DC 12V/1A
•“Quick Installation Guide” (broc ure).
If any of t e items are missing, please contact your reseller.
T e “User Manual” and “Quick Installation Guide” documents are available
on D-Link website (see www.dlink.ru).
!Using a power supply with a different voltage rating than the one
included will cause damage and void the warranty for this product.
Default Settings
IP address o device 192.168.0.1
Username (login) admin
Password admin
!
Gateway DPN-1021G wit default settings cannot connect to t e
Internet. To get started, please set your own password for access to t e
web-based interface; t en, if needed, configure ot er settings
recommended by your ISP.
2
DPN-1021G Quick Installation Guide
System Requirements and Equipment
•A computer wit any operating system t at supports a web browser.
•A web browser to access t e web-based interface of t e gateway:
◦Apple Safari 8 and later
◦Google C rome 48 and later
◦Microsoft Internet Explorer 10 and later
◦Microsoft Edge 20.10240 and later
◦Mozilla Firefox 44 and later
◦Opera 35 and later.
•A NIC (Et ernet adapter) to connect to t e gateway.
•An analog p one.
3
DPN-1021G Quick Installation Guide
CONNECTING TO PC
!
Invisible laser radiation may be emitted from t e end of t e fiber and/or
from DPN-1021G . Take all necessary precautions to avoid unnecessary
exposure to t is radiation.
1. Connect an Et ernet cable between t e Et ernet port of your PC and t e
10/100/1000Base-T port (LAN1) or 10/100Base-TX port (LAN2).
2. To connect the device to a fiber optic line: connect t e fiber optic cable
to t e PON port in t e bottom panel of t e gateway. Make sure t at center
conductor of t e cable is inserted directly into t e center of t e PON
connector. Secure t e cable by carefully pus ing t e fiber connector onto
t e PON connector until tig t. Be careful not to over-tig ten t e
connector or you may damage eit er t e cable or t e device.
3. To connect the device to an Ethernet line: in t e web-based interface of
t e gateway, select t e gateway's LAN port t at will be used as t e WAN
port and create an Et ernet WAN connection. T en connect an Et ernet
cable between an available Et ernet port of t e gateway and t e Et ernet
line.
!Please connect t e gateway to t e ISP's Et ernet line only after setting
t e WAN port and creating t e Internet connection.
4. Connect a p one cable between t e FXS port of t e gateway and t e
p one.
5. Connect t e power cord to t e power connector port on t e back panel of
t e gateway, t en plug t e power adapter into an electrical outlet or power
strip.
6. Turn on t e gateway by pressing t e ON/OFF button on its back panel.
7. Wait for several minutes. W en t e device receives all needed settings,
t e PON LED will stop blinking and will lig t solid green. W en t e
Internet connection is establis ed, t e Internet LED will lig t solid
green.
Now you s ould configure your PC to obtain an IP address automatically (as
DHCP client).
4
DPN-1021G Quick Installation Guide
Obtaining IP Address Automatically
(OS indows 7)
1. Click t e Start button and proceed to t e Control Panel window.
2. Select t e Network and Sharing Center section. (If t e Control Panel
as t e category view (t e Category value is selected from t e View by
drop-down list in t e top rig t corner of t e window), c oose t e View
network status and tasks line under t e Network and Internet
section.)
3. In t e menu located on t e left part of t e window, select t e Change
adapter settings line.
4. In t e opened window, rig t-click t e relevant Local Area Connection
icon and select t e Properties line in t e menu displayed.
5. In t e Local Area Connection Properties window, on t e
Networking tab, select t e Internet Protocol Version 4 (TCP/IPv4)
line. Click t e Properties button.
5
DPN-1021G Quick Installation Guide
6. Make sure t at t e Obtain an IP address automatically and Obtain
DNS server address automatically c oices of t e radio buttons are
selected. Click t e OK button.
7. Click t e OK button in t e connection properties window.
6
DPN-1021G Quick Installation Guide
CONFIGURING GATEWAY
Connecting to eb-based Interface
Start a web browser. In t e address bar of t e web browser, enter t e IP
address of t e gateway (by default, 192.168.0.1). Press t e Enter key.
!
If t e error “ The page cannot be displayed ” (or “ Unable to display the
page ”/“ Could not connect to remote server ”) occurs upon connecting to
t e web-based interface of t e gateway, make sure t at you ave
properly connected t e gateway to your computer.
If t e device as not been configured previously or t e default settings ave
been restored, after access to t e web-based interface t e Initial Configuration
page opens (see t e Initial Configuration section, page 10).
7
DPN-1021G Quick Installation Guide
If you configured t e device previously, after access to t e web-based interface
t e login page opens. Enter t e username (admin) in t e Username field
and t e password you specified in t e Password field, t en click t e LOGIN
button.
8
DPN-1021G Quick Installation Guide
T e Summary page displays general information on t e gateway and its
software.
T e web-based interface of t e gateway is bilingual (Englis /Russian). You
can select t e needed language upon t e initial configuration of t e web-based
interface of t e gateway or in t e System / Con iguration section of t e
menu.
Ot er settings of t e gateway are available in t e menu in t e left part of t e
page. Go to t e relevant section and select t e needed page.
9
DPN-1021G Quick Installation Guide
Initial Configuration
If t e device as not been configured previously or t e default settings ave
been restored, t e Initial Configuration page opens automatically upon access
to t e web-based interface or upon opening a web site on t e Internet.
1. Click t e START button.
2. Click YES in order to leave t e current language of t e web-based
interface or click NO to select t e ot er language.
3. On t e next page, c ange t e default administrator password in t e
Admin password field.
10
Autres manuels pour DPN-1021G
1
Table des matières
Autres manuels D-Link Porte
D-Link
D-Link DVG-2032S Manuel utilisateur
D-Link
D-Link DVG-2032S Manuel utilisateur
D-Link
D-Link DPN-144DG Manuel utilisateur
D-Link
D-Link DVG-4032S Manuel utilisateur
D-Link
D-Link DVG-5004S Manuel de l'opérateur
D-Link
D-Link DG-104S Manuel utilisateur
D-Link
D-Link DBG-X1000 Manuel utilisateur
D-Link
D-Link DBG-2000 Manuel utilisateur
D-Link
D-Link DI-704 Manuel utilisateur
D-Link
D-Link DPN-1021G Manuel utilisateur
D-Link
D-Link DSA-3110 Manuel utilisateur
D-Link
D-Link DG-104S Manuel utilisateur
D-Link
D-Link DCH-G020 Manuel utilisateur
D-Link
D-Link DG-102S Manuel utilisateur
D-Link
D-Link DSA-3110 Manuel utilisateur
D-Link
D-Link DVX-3500 Manuel utilisateur
D-Link
D-Link DI-701 iShare Guide de démarrage rapide
D-Link
D-Link VoIP Wireless Router DVG-G5402SP Manuel utilisateur
D-Link
D-Link DG-104S Manuel utilisateur
D-Link
D-Link DIV-140 Manuel utilisateur
Manuels Porte populaires d'autres marques
LST
LST M500RFE-AS Manuel utilisateur
Kinnex
Kinnex Media Gateway Manuel utilisateur
2N Telekomunikace
2N Telekomunikace 2N StarGate Manuel utilisateur
Mitsubishi Heavy Industries
Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur
ZyXEL Communications
ZyXEL Communications ZYWALL2 ET 2WE Manuel utilisateur
Telsey
Telsey CPVA 500 - SIP Manuel utilisateur
