D-Link DVG-5008SG Manuel utilisateur

their respective holders. Software and specifications subject to change without notice.

Quick Installation Guide

DVG-5008SG

VoIP Gateway

CD-ROM

which includes

the User Manual

Phone Cord X8 Ethernet

(CAT5 UTP)

Cable

Power

Adaptor

Using a power

supply with a

different

voltage rating

will damage

this product

and void the

warranty

DVG-5008SG FXS VoIP Gateway

Power Power LED. A steady light indicates a proper connection

to a power source.

VoIP

The VoIP LED will turn on when the VoIP Gateway is

connected to a VoIP service provider. The LED will blink if

not connected to a service provider.

Alarm

A blinking light indicates the VoIP Gateway is attempting

to connect with the Provisioning server or DVG can’t get

IP from DHCP or PPPoE Server. Once the service

connects, the LED will turn off. The LED will light solid red

if the self-test or boot-up fails.

WAN

When a connection is established the LED will light up

solid. The LED will blink to indicate activity. If the LED

does not light up when a cable is connected, verify the

cable connections and make sure your devices are

powered on.

LAN

When a connection is established the LAN LED will light

up solid on the appropriate port. The LEDs will blink to

indicate activity. If the LED does not light up when a cable

is connected, verify the cable connections and make sure

your devices are powered on.

Phone

Green Blinking – FXS is alerting (ringing) for an inbound

call.

Green Solid – The line is in use.

Red Solid – As users execute “Status-> FXS Line

Diagnostic” and there is some error on the FXS port.

Hardware Overview

DVG-5008SG FXS VoIP Gateway

Rear Panel

1. WAN: Connect to your broadband modem using an Ethernet

cable.

2. LAN: Connect to your Ethernet enabled computers using

Ethernet cabling.

3. Phone Port (1-8): Connect to your phones using standard

phone cabling (RJ-11).

4. Ground: A conducting connection with the earth. Connect with

the ground so as to make the earth a part of an electrical

circuit using metal wire.

5. Power Receptor: Receptor for the provided power adapter.

6. Power Switch: Press it down to turn on DVG.

DVG-5008SG FXS VoIP Gateway

A. Insert one end of the Ethernet cable into the Ethernet (LAN) port on

the back panel of the DVG-5008SG and the other end of the cable to

an Ethernet Adapter or available Ethernet port on your computer.

B. Insert one end of the Ethernet cable into the WAN port on the back of

the DVG-5008SG and the other into your cable/DSL modem or the

LAN port of your router.

C. Insert a telephone cable into the Phone port, and then connect the

cable to your telephone.

Installing the Hardware

DVG-5008SG FXS VoIP Gateway

D. Connect the power adapter to the power input at the back panel of

the DVG-5008SG and then plug the other end of the power adapter

to a wall outlet or power strip. Then press down Power Switch. On

the front of the device, the Power LED will turn on to indicate proper

operation.

E. Check the LED display on the front of the VoIP Gateway to confirm

that the connections have been made.

Installing the Hardware (continued)

DVG-5008SG FXS VoIP Gateway

After the installations are completed, your network should look similar to

the diagram below.

Hardware configuration is complete! If your VoIP service is already activated, you

can make phone calls now.

DVG-5008SG FXS VoIP Gateway

Configuration

To access the web-based configuration utility, open a web browser such

as Internet Explorer and enter the IP address of the DVG-5008SG.

Click Next.

Open your Web browser and type

http://192.168.8.254 into the URL

address box. Press the Enter or

Return Key.

Click Lo

in to enter Web Site.

Click Setu

Wizard.

DVG-5008SG FXS VoIP Gateway

Configuration (continued)

It is highly recommended to create

a login ID and password to keep

your gateway secure.

Enter a NTP server or use the

default server.

Click Next.

DVG-5008SG FXS VoIP Gateway

Configuration (continued)

Select your Internet connection

type:

DHCP – Most Cable ISPs or if

you are connecting the DVG-

5008SG behind a router.

Static IP – Select if your ISP

supplied you with your IP

settings.

PPPoE – Most DSL ISPs.

PPTP – Select if required by

your ISP.

Select Manual to manually enter

IP address of DNS or select

Auto if DNS is assigned by ISP.

Click Next.

DVG-5008SG FXS VoIP Gateway

Configuration (continued)

by clicking Enable support of

SIP Proxy Server. Enter Proxy

Server IP/Domain and Port.

The Outbound Proxy Support

is optional. To register, please

click on the Outbound Proxy

Support check box and enter

Outbound Proxy IP/Domain

and Port in it.

Registration by phone line: enter

Number, User ID/Account and

Password supplied by your

ITSP. Click on the Register

check box to register to Proxy

Server.

Setup is finished. Check the

summary of your settings. To make

new settings effective, you must

click on the Restart button to reboot

the DVG-5008SG.

Click Restart.

Click Next.

Table des matières

Langues :

Autres manuels D-Link Porte

D-Link

D-Link DI-701 iShare Guide de démarrage rapide

D-Link

D-Link DG-102S Manuel utilisateur

D-Link

D-Link DRO-210i Manuel utilisateur

D-Link

D-Link DG-104S Manuel utilisateur

D-Link

D-Link DVG-7022S Manuel utilisateur

D-Link

D-Link VoIP Wireless Router DVG-G5402SP Manuel utilisateur

D-Link

D-Link DIV-140 Manuel utilisateur

D-Link

D-Link DVG-3032S Manuel utilisateur

D-Link

D-Link DVG-7044S Manuel utilisateur

D-Link

D-Link Airspot DSA-3100 Manuel utilisateur

D-Link

D-Link DVG-5112S Manuel utilisateur

D-Link

D-Link Airspot DSA-3100 Manuel utilisateur

D-Link

D-Link DVG-7022S Manuel utilisateur

D-Link

D-Link DVX-3500 Manuel utilisateur

D-Link

D-Link DG-102SP Manuel utilisateur

D-Link

D-Link Airspot DSA-3100 Manuel utilisateur

D-Link

D-Link DRO-220i Manuel utilisateur

D-Link

D-Link DFL-M510 Manuel utilisateur

D-Link

D-Link DPN-124G Manuel utilisateur

D-Link

D-Link DVG-3104MS - VoiceCenter PSTN Gateway Manuel utilisateur

D-Link

D-Link DVG-1120M Manuel utilisateur

D-Link

D-Link DG-102S Manuel utilisateur

D-Link

D-Link DBG-X1000 Manuel utilisateur

D-Link

D-Link DPG-2000W - AirPlus G Wireless Presentation... Manuel utilisateur

Manuels Porte populaires d'autres marques

LST

LST M500RFE-AS Manuel utilisateur

Kinnex

Kinnex Media Gateway Manuel utilisateur

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuel utilisateur

Telsey

Telsey CPVA 500 - SIP Manuel utilisateur

RTA

RTA 460A-NNA4 Fiche technique

Shaw

Shaw Gateway HDPVR Manuel utilisateur

ABB

ABB VSN900 Guide de démarrage rapide

Commander

Commander Pulse Manuel utilisateur

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuel utilisateur

NETGEAR

NETGEAR C6300BD Manuel utilisateur

Amit

Amit CDW531AM Manuel utilisateur

HMS

HMS Netbiter EasyConnect EC150 Manuel utilisateur

Huawei

Huawei EchoLife HG620 Manuel utilisateur

AT&T

AT&T U-verse 3801 Manuel d'utilisation et d'entretien

Logic IO

Logic IO RTCU MX2 turbo Manuel utilisateur

Suttle

Suttle MediaMAX MXM-521 Manuel utilisateur