CYP CM-397M Manuel utilisateur

CM-397M

CGA to WXGA Converter

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

Version VR1.0 May 2012

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE

VR0 27/06/12 Preliminary Release

CONTENTS

1. Introduction............................................ 1

2. Applications........................................... 1

3. Package Contents ................................ 1

4. System Requirements............................ 1

5. Features.................................................. 2

6. Operation Controls and Functions....... 3

6.1 Front Panel ........................................3

6.2 Rear Panel.........................................3

6.3 Top Panel ..........................................4

7. OSD Menu .............................................. 5

8. Connection and Installation................. 6

9. Specications ........................................ 7

10. Acronyms ............................................. 8

1. INTRODUCTION

This is an analog CGA (RGB) or Component (YCbCr) to PC Converter

box that can scale signal to 3 different PC modes of VGA, XGA or

WXGA. It enables you to connect your RGB or YCbCr signal source

such as game boards or video player to a PC display. Further features

such as phase & H/V position adjustment, eld-invert setting and OSD

display allows users with quality image and friendly use on displaying

the image.

2. APPLICATIONS

• CGA to PC conversion

• Component (YCbCr) video to PC conversion

3. PACKAGE CONTENTS

• Component/CGA to PC Converter

• D-Sub 15pin to 3RCA Component Cable

• 5V DC Power Supply Adaptor

• Operation Manual

4. SYSTEM REQUIREMENTS

• Input source equipment such as PC/Video player and output TV/

monitor with connection cables.

5. FEATURES

• Accepts RGB or YCbCr format and converts to PC format

• Scales CGA/Component YCbCr 480i/576i up to VGA/XGA/WXGA

PC resolution

• 50/60Hz frame rate conversion ensures glitch-free display (576i only)

• The input of RGB is auto detected and can be RGBHV, RGB H+V or

RGsB(sync. on G)

• The input of YPbPr is auto detected and can be YPbPrHV, YPbPrS or

YPbPr(sync. on Y)

• Play video games on your PC monitors

• Supports CGA at 480i and 576i

• Supports Phase and H/V position adjustment

• Supports Field-invert setting

• Supports Separation Sync, Composite Sync, Sync-on-Green and

Sync-on-Y

• High-resolution output picture

• Plug & play-No driver software required and easy to set up for use

• Palm size design for handy carrying

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

CGA

1 2

1CGA IN

Connect the input source equipment such as PC or video player

with D-Sub 15pin cable or YPbPr to D-Sub 15pin adaptor cable.

2DC 5V

Connect the power adaptor included in the package and plug it

into the AC wall outlet for power supply.

6.2 Rear Panel

VGA

XGA

WXGA

OUT

1 2

1VGA/XGA/WXGA Switch

Switch the dipswitch for output resolution between VGA, XGA or

WXGA.

2PC OUT

Connect the display TV/monitor with D-Sub 15pin cable for image

output.

6.3 Top Panel

Component/CGA to PC converter

1 2

1MENU button

Press this button once to bring out the current input & output

information and while the information still appear on the screen

press it again to select input signal with RGB or YCbCr. To enter

into OSD menu, press and hold this button for 3 seconds. And press

it repeatedly to cycle through the selections and leave the OSD

menu for few seconds for device to switch the setting.

2INPUT LED

This LED will illuminate according to input source’s signal, when in

red the input signal is RGB, when in green the input signal is YCbCr.

7. OSD MENU

IN 576i

OUT WXGA

Phase Adjust

IN Color Space

H Position

V Position

Field Invert

Information

System Reset

Exit

1The rst block of the OSD will display the current input and output

timing.

2Phase Adjust has total of 32 phases ranging from 0~31. Press the

button repeatedly to adjust the phase setting whenever changing

the source equipment. The device will have the last memory on

the last phase adjustment.

3IN Color Space for selecting input signal of RGB or YPbPr.

4H Position has total of 20 horizontal positions ranging from -10~+10.

5V Position has total of 10 vertical positions ranging from -5~+5.

6Field Invert is to adjust the eld’s even/odd problem, selection Yes

or No to recover the issue when display image appear to be eld

inverted.

7Information displays the input signal, color space, eld invert

setting and rmware version.

8System reset will bring the device back to the factory default

setting

Autres manuels pour CM-397M

Table des matières

Autres manuels CYP Convertisseur de média

Manuels Convertisseur de média populaires d'autres marques

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuel utilisateur

SPROLINK

SPROLINK VA1 Manuel utilisateur

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuel utilisateur

Nikon

Nikon AF-S TC-20E III Manuel utilisateur

Axis

Axis AXIS Q7406 Manuel utilisateur

Omega

Omega TAC80B-J Manuel utilisateur

Zoom

Zoom Thunderbolt TAC-2R Manuel utilisateur

OST

OST iConverter 10/100M Manuel utilisateur

Vertiv

Vertiv Netsure Manuel utilisateur

birddog

birddog MINI Manuel utilisateur

Roland

Roland GI-10 Manuel utilisateur

Wallenstein

Wallenstein WX310 Manuel utilisateur

Pace

Pace MSS 200-1 Manuel utilisateur

Solar Converters

Solar Converters EQ 12/24-50 Manuel utilisateur

TIE

TIE MIDI 1i1o Manuel utilisateur

DCS

DCS Vivaldi Upsampler Manuel utilisateur

Westermo

Westermo MCW-211 SERIES Manuel utilisateur

Expert

Expert EX-9543 Manuel utilisateur