CYP CPLUS-V2PE Manuel utilisateur

CPLUS-V2PE

1 by 2 UHD Scaler with Audio De-Embedded

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE

VR0 07/04/16 Preliminary Release

CONTENTS

1. Introduction............................................ 1

2. Applications........................................... 1

3. Package Contents ................................ 1

4. System Requirements............................ 1

5. Features.................................................. 2

6. Operation Controls and Functions....... 3

6.1 Front Panel ........................................3

6.2 Rear Panel.........................................4

6.3 OSD Menu.........................................5

7. Connection Diagram .......................... 13

8. Specications ...................................... 14

8.1 Technical Specications ...............14

8.2 Video Supports Specication .......15

8.3 Audio Specications......................16

9. Acronyms ............................................. 16

1. INTRODUCTION

The 1 by 2 UHD Scaler with Audio De-Embedded is designed to

upscale 1080p signal into 4K2K 6G or downscale 4K2K 6G signal into

1080p with synchronized digital and analog audio output. Friendly

and simple design that allow user with direct viewing on input HDMI

content and OSD that ease user with output settings/selection. Scaling

signal up to 2 simultaneous HDMI output with two different resolutions

or generate patterns to output display with assigned resolution

allowing on-site display testing. This UHD Scaler is the best dene tool

between your HD and UHD signal.

2. APPLICATIONS

• On-site equipment testing

• HDMI signal splitting

• Production testing

• R&D design and testing

3. PACKAGE CONTENTS

• 1 x 1 by 2 UHD Scaler with Audio De-Embedded

• 1 x 5V DC Power adaptor

• Operational Manual

4. SYSTEM REQUIREMENTS

Input source equipment such as PS3 or Blu-ray player and output

display or TV with equivalent HDMI cables.

5. FEATURES

• HDMI with 6G 4Kx2K supported and HDCP 2.2 compliant

• Supports HDMI signal bypass on both outputs or upscale 1080p

signal into 4K2K on output B and downscale 4K2K signal into 1080p

on output A

• Supports 4K2K@50/60 (4:4:4) to 4K2K@50/60(4:2:0) conversion

• Supports auto pattern generation with assigned resolution for on-site

display testing

• Supports HDMI input of one 6G and HDMI outputs of two 6G

• Supports HDMI signal bypass, upscale and downscale

• Supports EDID selections

• Supports High-Dynamic-Range (HDR) image

• Supports HDR conversion from 4Kx2K@24/25/30(444/422)10 or 12bit

to 4096x2160@24/25/30Hz 8bit x

• Supports UHD resolutions up to 4Kx2K: 3840x2160@24/25/30Hz

3840x2160@50/60 Hz (4:4:4) & 4096x2160 @24/25/30 Hz,

4096x2160@50/60Hz (4:4:4)

• Supports data rate up to 6Gbps (600MHz) and Deep Color up to

1080p 48-bit

• Supports pass-through of HD audio formats of LPCM 2/5.1/7.1CH,

Dolby Digital 2~5.1CH, DTS 2~5.1CH, Dolby Digital Plus, Dolby TrueHD,

Dolby Atmos and DTS-HD Master Audio

• HDMI compatible with DVI

• Supports OSD with instant I/O resolution display

• Supports Digital to Analog (DAC) audio conversion

• Supports Apple mode signal display

• Supports HDCP 2.2 to HDCP1.4 conversion

Note: When displaying HDMI 4Kx2K/HDR signal, equivalent source

signal, output display and HDMI cables are required in order to

secure the best image display. It is suggested to use Premium High

Speed HDMI cable for 6G HDMI signal.

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

POWER4K2K SYNC MENU

–+

ENTER

TEST

PATTERN

21 3 4 5 6

1POWER LED: This LED will illuminate when the device is connected

with power supply.

24K2K LED: This LED will illuminate when the input source contains

4K2K signal.

3SYNC LED: This LED will illuminate when the input source is sending

signal.

4MENU: Press this button to enter into OSD menu and when under

OSD selection press this button to exit. Press and hold this button

together with TEST PATTERN “-“ button for 3 seconds to set the

device back to factory default.

5TEST PATTERN -/+: Press these buttons to select patterns to display

on outputs instantly. Press these buttons together to switch output

timing to 1280x720@60 instantly. When under OSD selection, press

these buttons to roll the scroll.

6ENTER: Press this button to enter and conrm OSD selection.

Press and hold this button together with the MENU button for

3 seconds to enter into rmware update mode. The LEDs will

illuminate in circle from left to right. Plug in the USB thumb drive

with updated rmware inside and the LEDs will stop illuminating.

Once the update procedure completed or successfully, all LEDs

will illuminate together but if update failed no LED will illuminate.

The device will automatically reboot after 10 seconds or user may

re-power on the device manually.

6.2 Rear Panel

LRSERVICE

DC 5V

HDMI IN

AUDIO OUT

HDMI OUT

21 3 4 5

1HDMI IN: This slot is to connect with source equipment such as PS3

or Blu-ray player.

2HDMI OUT: These slots are to connect with UHD display/TV for

images display. Each output can be displaying with different

timing and pattern and image.

3AUDIO OUT L/R: These slots are to connect with audio equipment

such as amplier or speakers for audio signal output PCM 2CH that

is synchronized with HDMI input audio signal.

4SERVICE: This slot is reserved for factory rmware update only.

5DC 5V: Plug the 5V DC power supply into the unit and connect the

adaptor to an AC outlet.

6.3 OSD Menu

1ST LEVEL 2ND LEVEL 3RD LEVEL 4TH LEVEL

OUTPUT

OUTPUT A INPUT 4K2K

PASS THROUGH

DOWN 1080P*1

FIX 4K2K(420)*2

INPUT HDR PASS THROUGH

FIX 8 BITS*5

OUTPUT B

INPUT 1080P

PASS THROUGH

UP 4K2K*3

INPUT 4K2K

UP 4K2K(420)*4

PASS THROUGH

FIX 4K2K(420)

INPUT HDR

PASS THROUGH

FIX 8 BITS*5

INT

4K(6G-2CH) YES/NO

INT

4K(3G-2CH) YES/NO

INT

4K(420-2CH) YES/NO

INT

1080P(2CH) YES/NO

EDID EXT

OUT A YES/NO

EXT

OUT B YES/NO

EXT

OUT A (2CH) YES/NO

1ST LEVEL 2ND LEVEL 3RD LEVEL 4TH LEVEL

EXT

OUT B (2CH) YES/NO

HDCP

HDCP SUPPORT

OFF

REFER TO

SOURCE

REFER TO DISPLAY

DISPLAY INFO.

OFF

5 SEC.

10 SEC.

OSD 15 SEC.

OSD TIME OUT 20 SEC.

25 SEC.

30 SEC.

35 SEC.

40 SEC.

OFF

MODE ON

AUTO PATTERN

AUTO TIMING

WHITE COLOR

RED COLOR

GREEN COLOR

TEST PATTERN A BLUE COLOR

PATTERN MEGENTA

COLOR

Autres manuels pour CPLUS-V2PE

Table des matières

Autres manuels CYP Convertisseur de média

Manuels Convertisseur de média populaires d'autres marques

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuel utilisateur

SPROLINK

SPROLINK VA1 Manuel utilisateur

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuel utilisateur

Nikon

Nikon AF-S TC-20E III Manuel utilisateur

Axis

Axis AXIS Q7406 Manuel utilisateur

Omega

Omega TAC80B-J Manuel utilisateur

Zoom

Zoom Thunderbolt TAC-2R Manuel utilisateur

OST

OST iConverter 10/100M Manuel utilisateur

Vertiv

Vertiv Netsure Manuel utilisateur

birddog

birddog MINI Manuel utilisateur

Roland

Roland GI-10 Manuel utilisateur

Wallenstein

Wallenstein WX310 Manuel utilisateur

Pace

Pace MSS 200-1 Manuel utilisateur

Solar Converters

Solar Converters EQ 12/24-50 Manuel utilisateur

TIE

TIE MIDI 1i1o Manuel utilisateur

DCS

DCS Vivaldi Upsampler Manuel utilisateur

Westermo

Westermo MCW-211 SERIES Manuel utilisateur

Expert

Expert EX-9543 Manuel utilisateur