CYP CP-302M Manuel utilisateur

CP-302M

HDMI to HDMI Scaler

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

Version 1.1 August 2011

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE

VR0 23/08/12 Preliminary Release

VS1 01/02/13 Updated text/diagrams

VR2 09/04/14 Add Output Support Timing

CONTENTS

1. Introduction............................................ 1

2. Applications........................................... 1

3. Package Contents ................................ 1

4. System Requirements............................ 1

5. Features.................................................. 2

6. Operation Controls and Functions....... 3

6.1 Top Panel ..........................................3

6.2 Left Panel ..........................................4

6.3 Right Panel........................................4

6.4 OSD Menu.........................................5

6.5 Input Resolutions ..............................6

6.6 Output Resolutions...........................7

7. Connection Diagram ............................ 8

8. Specications ........................................ 9

9. Acronyms ............................................. 10

1. INTRODUCTION

The HDMI to HDMI Scaler is designed to scale HDMI sources, either

HD or PC resolution, to an alternative HDMI resolution (HD or PC). The

device is HDMI and DVI compliant and is perfect for the integration of

sources where resolution and/or resolution type requires conversion. A

simple on-screen display (OSD) allows the user to congure the device

with ease.

2. APPLICATIONS

• Convert and integrate HD resolution output to PC systems

• Convert and integrate PC resolution output to HD systems

• Downscale Full HD (1080p) resolution output for HD Ready displays

• Scale 24 fps Blu-ray input to standard 1080p

3. PACKAGE CONTENTS

• HDMI to HDMI Scaler

• 1×5 V/1.2 A DC Power Adaptor

• Operation Manual

4. SYSTEM REQUIREMENTS

Source equipment such as a PC/laptop or Blu-ray player and an HDTV

or HD monitor with HDMI connection cables.

5. FEATURES

• HDMI, HDCP 1.1 and DVI 1.0 compliant

• Upscale the video signal from an HDMI source up to 1080p@50/60

• Accepts a wide range of input resolutions of 480i to 1080p (HDTV)

and VGA to WUXGA (PC)

• Supports audio sampling rate up to 192 kHz

• Motion adaptive 3-D deinterlacing algorithm

• 3-D noise reduction in both temporal and spatial domain

• Frame rate conversion

• Adaptive contrast enhancement

• Supports CEC bypass

• Native output resolution setting

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Top Panel

1 2

Scaler

Timing

1Timing Menu

Press the button once to show the display's resolution and while the

OSD is on press again to select the required output resolution, the

unit will switch to the new resolution after 3 seconds. Press and hold

the button for 5 seconds will switch the unit to 720p@60 resolution,

conrmed by the LED blinking twice.

2Power LED

This LED will illuminate when the device is connected to a power

supply.

6.2 Left Panel

1 2

1HDMI In

Connect to an HDMI source such as a PC/Laptop or DVD player

with an HDMI cable.

2DC 5V

Plug the 5V DC power supply into the unit and connect the

adaptor to an AC outlet.

6.3 Right Panel

HDMI OutService Only

1 2

1Service Only

Manufacturer use only.

2HDMI Out

Connect to an HDMI equipped TV/monitor for display of the HDMI

source signal.

6.4 OSD Menu

1IN 640×480@85

OUT 1080p@60

OUTPUT SELECT

480p

576p

720p 50 59.94 60

1080i 50 59.94 60

1080p 50 59.94 60

1024×768

1280×800

1366×768

1600×900

1680×1050

1920×1200

3Native

4Information

5Exit

1IN/OUT: Current input and output resolutions.

2Output Select: Output resolution selection.

3Native: Select output display's native resolution. The device will

read Native 1's EDID information rst and then Native 2. If both

native timings are not within the output selection of the device

then the device will output 720p@60.

4Information: Display both source and display information and the

device's rmware version.

5Exit: Leave the OSD menu.

Autres manuels pour CP-302M

Table des matières

Autres manuels CYP Convertisseur de média

Manuels Convertisseur de média populaires d'autres marques

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuel utilisateur

SPROLINK

SPROLINK VA1 Manuel utilisateur

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuel utilisateur

Nikon

Nikon AF-S TC-20E III Manuel utilisateur

Axis

Axis AXIS Q7406 Manuel utilisateur

Omega

Omega TAC80B-J Manuel utilisateur

Zoom

Zoom Thunderbolt TAC-2R Manuel utilisateur

OST

OST iConverter 10/100M Manuel utilisateur

Vertiv

Vertiv Netsure Manuel utilisateur

birddog

birddog MINI Manuel utilisateur

Roland

Roland GI-10 Manuel utilisateur

Wallenstein

Wallenstein WX310 Manuel utilisateur

Pace

Pace MSS 200-1 Manuel utilisateur

Solar Converters

Solar Converters EQ 12/24-50 Manuel utilisateur

TIE

TIE MIDI 1i1o Manuel utilisateur

DCS

DCS Vivaldi Upsampler Manuel utilisateur

Westermo

Westermo MCW-211 SERIES Manuel utilisateur

Expert

Expert EX-9543 Manuel utilisateur