CYP OR-HD88S Manuel utilisateur
OR-HD88S
v1.3 HDMI 8 x 8 Matrix Switcher
OPERATION MANUAL
DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer le, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2011 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sucient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
RDV1 11/11/11 Preliminary Release
RDV2 13/12/11 Power Supply Change
RDV3 15/02/12 LAN Function
VS0 29/03/12 Updated format, diagrams, and
statements
RDV4 04/07/12 Control's Function
VS0 24/07/12 Telnet and Web GUI sections updated
CONTENTS
1. Introduction ...........................................1
2. Applications ...........................................1
3. Package Contents ..................................1
4. System Requirements ...........................1
5. Features ..................................................2
6. Operation Controls and Functions .......3
6.1 Front Panel ................................................... 3
6.2 Rear Panel ..................................................... 4
6.3 Side Panel ..................................................... 5
6.4 Remote Control .......................................... 5
6.5 RS-232 Pin Assignment............................ 6
6.6 RS-232 and Telnet Commands ............. 7
6.7 Telnet Control .............................................. 8
6.8 Web GUI Control ......................................10
7. Connection Diagram .......................... 12
8. Specications ...................................... 13
9. Acronyms ............................................. 14
1
1. INTRODUCTION
The OR-HD88S Matrix Switcher connects eight HDMI sources to eight
displays allowing any source to be independently displayed on any
screen. This matrix switcher can be controlled via the supplied IR Remote
Control, IP Control, RS-232, or by using the selection buttons on the front
of the unit. This device supports ‘Deep Colour’, High Denition Audio, and
3D signal compatibility.
2. APPLICATIONS
Video/TV wall display
Commercial advertising and display
Lecture room display and control
Retail Demonstration and Control.
3. PACKAGE CONTENTS
8×8 HDMI Matrix
1×24 V/6.25 A DC Adaptor
1×Remote Control
1xIR Receiver
Operation Manual
4. SYSTEM REQUIREMENTS
HDMI equipped input source devices with HDMI cables and HDMI
equipped output display.
2
5. FEATURES
HDMI, HDCP 1.1, DVI 1.0 compliant
HDMI 8x8 Matrix Switcher
Resolutions supported: PC - VGA to WUXGA ; HDTV - 480i to 1080p
plus 1080p24fps
High Denition audio supported: Dolby TrueHD, Dolby Digital Plus,
DTS-HD Master Audio + LPCM
The HDMI input is compensated, clock / phase adjusted, and jitter
eliminated so the output is a brand new standard HDMI signal running
up to 15m at 1080p
Supports Audio sample rate up to 192kHz 24bit
RS-232, CEC Command functionality, IR Remote Control, and IR
extender supported
Selectable EDID settings - TV (downstream) and STD (xed)
Supports Deep Colour (10 & 12 bit)
2U Rack Mount design
Supports 3D signals
Key lock function
Supports full IP control
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER LOCK
MENU OUTA 1B2C3D4
IN
E5F6G7H8
2 3 4 5 61
8 x 8 HDMI Matrix
1
LCM: Displays the setting information of each input and output
setting.
2
POWER: Press this button to power the device on/o. The LED will
illuminate green when the power is on, red when it is in 'Standby'
mode.
3
LOCK: Press this button to lock all the buttons on the panel; press
again to unlock. The LED will illuminate green when locked.
4
IR: IR Receiver window (accepts the remote control signal of this
device only).
5
MENU: Press this button to access the LCM menu system, from here
EDID settings can be managed and IP system settings are displayed.
Note: For the 'TV' EDID setting, the unit will read and store the EDID
information of the display connected to HDMI output A. For the 'STD'
EDID setting the unit's built-in EDID setting will be used (1080p@60/12-bit
for video and LPCM 2CH for audio).
6
1~8/A~H and OUT/IN: Press the OUT or IN button to select the output
or input mode and then press the required number button to make
the selection accordingly.
For example, if outputs A~D need to be set to input 1 and outputs
E~H need to be set to input 2 then the following sequence of button
presses need to be performed:
Press: OUTABCDIN1MENU,
and then press: OUTEFGHIN2MENU.
Note: If the MENU button is not pressed the selection will not be changed.
4
6.2 Rear Panel
CONTROL
DC 24V
IR-In
RS-232 Service
A
HDMI Out
1
HDMI In
B
HDMI Out
2
HDMI In
C
HDMI Out
3
HDMI In
D
HDMI Out
4
HDMI In
E
HDMI Out
5
HDMI In
F
HDMI Out
6
HDMI In
G
HDMI Out
7
HDMI In
H
HDMI Out
8
HDMI In
12
34
V+
GND
GND
GND
V+
12
34
V+
GND
GND
GND
V+
2 3
3
4 71 6
5
1
CONTROL: This port is the link for Telnet control, connect to an active
Ethernet link with an RJ45 terminated cable (for further details, please
refer to sections 6.8 and 6.9).
Warning: Please do not connect this port directly to the PC/Laptop
as the Telnet function will not work.
2
RS-232: Connect to a PC or control system with D-Sub 9-pin cable for
the transmission of RS-232 commands.
3
IR IN: Connect to the supplied IR extenders for IR signal reception from
the remote control of the Matrix. Ensure that the remote is within the
direct line-of-sight of the IR extender when used.
4
SERVICE: Manufacturer use only.
5
HDMI OUT A~H: Connect to HDMI equipped TVs or monitors for
display of the HDMI input source signal.
6
HDMI IN 1~8: Connect to the HDMI input source devices such as a DVD
player or a Set-top Box with HDMI cable or DVI to HDMI cable..
7
DC 24V: Plug the 24 V DC power supply into the unit and connect the
adaptor to an AC outlet.
5
6.3 Side Panel
1
1
Fan Ventilator: These are air ventilation areas, DO NOT block these
areas or cover it with any object. Please allow adequate space around
the unit for air circulation.
6.4 Remote Control
1
POWER: Press this button to
switch on the device or set it to
standby mode.
2
IN: Input ports selection 1~8.
3
OUT: Output ports selection A~H.
1
23
Autres manuels pour OR-HD88S
1
Table des matières
Autres manuels CYP Commutateur matriciel
CYP
CYP SM-4X4-HDMI-LC Manuel utilisateur
CYP
CYP PU-8H8HBTL Manuel utilisateur
CYP
CYP CMSI-8D8DS Manuel utilisateur
CYP
CYP OR-DVI88SA Manuel utilisateur
CYP
CYP CPLUS-V4H4H Manuel utilisateur
CYP
CYP PU-442PL-KIT Manuel utilisateur
CYP
CYP EL-42M-PIP Manuel utilisateur
CYP
CYP PU-8H8HBTPL-4K Manuel utilisateur
CYP
CYP PU-8H8HBTE Manuel utilisateur
CYP
CYP CMSDI-1616S Manuel utilisateur
CYP
CYP PUV-1082-PRO Manuel utilisateur
CYP
CYP CMSI-4H4CVL Manuel utilisateur
CYP
CYP CMPRO-U8H8CVE Manuel utilisateur
CYP
CYP OR-HD42S Manuel utilisateur
CYP
CYP CMSI-46PL Manuel utilisateur
CYP
CYP OR-32USBC-4K22 Manuel utilisateur
CYP
CYP SM-4X2-HDMI-LC Manuel utilisateur
CYP
CYP CMSI-8H8HC Manuel utilisateur
CYP
CYP CMSI-4H4CV Manuel utilisateur
CYP
CYP MA-421 Manuel utilisateur
