CYP CDPS-44SM Manuel utilisateur
CDPS-44SM
HDMI 4x4 Seamless Matrix Switcher
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and is be-
lieved to be accurate. Cypress Technology assumes no responsibility
for any infringements of patents or other rights of third parties which
may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no com-
mitment to update or to keep current the information contained in
this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, tran-
scribed, stored in a retrieval system, or any of its part translated into
any language or computer le, in any form or by any means—elec-
tronic, mechanical, magnetic, optical, chemical, manual, or other-
wise—without express written permission and consent from Cypress
Technology.
© Copyright 2012 by Cypress Technology.
All Rights Reserved.
Version 1.0 January 2012
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
RDV1 21/09/13 Preliminary Release
RDV2 17/04/13
RDV3 04/06/13 Matrix mode 1080i@50/60 IN4
Disabled
RDV4 18/11/13 Add WebGUI
RDV5 06/01/14 Add notes on 1080i@50/60 timing
RDV6 10/02/15 Add Dual PiP& Quad Function
CONTENTS
1. Introduction........................................... 1
2. Applications.......................................... 1
3. Package Contents ............................... 1
4. System Requirements........................... 1
5. Features................................................. 2
6. Operation Controls and Functions...... 3
6.1 Front Panel ....................................... 3
6.2 Rear Panel........................................ 7
6.3 Remote Control............................... 8
6.3.1 Remote Control Dip Switch......... 9
6.4 RS-232 Protocols ............................ 10
6.5 RS-232 & Telnet Commands......... 10
6.6 RS-232 & Telnet control................. 14
6.7 Telnet Setting ................................. 15
6.8 OSD MENU...................................... 16
6.9 Web GUI......................................... 22
7. Connection Diagram ......................... 24
8. Specications ..................................... 25
9. Timing .................................................. 25
9.1 Input Support Timing ..................... 25
9.2 Output Support Timing ................. 26
1
1. INTRODUCTION
The 4 by 4 HDMI Seamless Matrix Switcher allows the signal from 4 dif-
ferent input sources to be freely selected and arranged on 4 displays
(TV or monitor), providing four output modes (Matrix, Dual PoP/ PiP,
Quad and TV Wall) for various applications. Matrix mode routes the
source signals to output displays as regular matrix does, Dual mode
allows 2 sets of 2 selected sources to show on designate output dis-
plays with PoP and PiP method and TV Wall mode extends a selected
source to display on all 4 output displays as one. The device supports
video timings up to WUXGA@60RB and 1080p@60Hz, audio format up
to 7.1CH LPCM at 192kHz sampling rate based on input source EDID.
For all the opera-tion/control can be done through IR, remote control,
Telnet, WebGUI, RS-232 or front panel buttons.
2. APPLICATIONS
• Broadcasting room and control
• Surveillance room and control
• Public advertisement and control
• Digital Presentation
• Conference call or meeting room presentation
3. PACKAGE CONTENTS
• 1 x 4 by 4 Seamless Matrix Switcher
• 1 x Remote Control (CR-125)
• Software CD Driver (Optional)
• 1 x 12V/3A DC Power Adaptor
• Operation Manual
4. SYSTEM REQUIREMENTS
Input source equipments such as DVD/Blu-ray players or any video
signal and PC/Notebook devices and output HD TV/monitor.
2
5. FEATURES
• HDMI, HDCP1.1 and DVI compliant
• Deep color support 8/10/12 bit source
• Seamless switching
• Supports four different modes: Matrix mode/ Dual mode/ Quad /
TV Wall mode
■ Matrix mode: Can routes and output any 4 source to any 4 dis-
plays with seamless switching
Note: Under output timing 1080i@50/60 input 4 will be disabled,
OSD will show “IN 4 Disabled”
■ Dual mode: Can display POP (Picture Of Picture) & PiP (Picture
In Picture) image com-bined by 2 sources to be presented on
the HDMI output ports (Dual A and Dual B)
■Quad mode: Can output all sources to a display (4 in 1) as a full
image.
■TV Wall mode: Can output any source to 4 displays (2 by 2
Video wall) as a full image with adjustable Bezel Correction for 4
displays
• Supports OSD, RS232, Telnet, WebGUI, Remote control and on-pan-
el controls
• Input resolutions support VGA~WUXGA and 480i~1080p
• Output resolutions support 480p~1080p
• Supports different input resolution and output resolution selectable
from OSD menu. The factory default value for the output resolution
is 720p@60Hz/ 2CH LPCM
• Audio supports LPCM 2CH, 6CH, 8CH/AC3/DTS/Dolby Digital Plus/
Dolby TruHD & DTS-HD
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER
-
+
1
INPUT 234SAVERECALL
A
OUTPUT BCD
4X4 SEAMLESS MATRIX CDPS-44SM
LOCK
MATRIX/
DUAL/WALL
XGA
720P
MENU
1 2 3 4 5 8 9
6 7
1IR Window:
Accept IR signal from the device’s remote control included in the
package.
2Power
ON/OFF: Press this button to power on the device or set it to
standby mode.
Factory default: Press Power then connect power supply to
reset the system to Factory default setting.
3MENU:
Press this button to bring up the OSD menu on screen.
Press “MENU” with “-“button to switch output timing to 720P@60Hz
instantly.
Press “MENU” with “+” button to switch output timing to XGA
(1024x768@60Hz) instantly.
4-/+ Buttons:
Press these buttons to scroll down/up the OSD selections then press
“MENU” button to conrm.
5CHANNEL INPUT 1~4 and CHANNEL OUTPUT A~D:
Matrix mode: To display any of the four sources on to andy of
the four displays.
i. Press “Matrix/Dual/TV Wall” button to switch to Matrix mode
and LED will illuminate constantly.
ii. Press an output from A~D and then press corresponding input
from 1~4. For example: press output A then press input 1,
output A will display input 1’s image. Each output setting must
4
be made individually.
Dual PoP mode: To combine 2 sources to be presented on each
HDMI output ports (Dual A and Dual B) as left and right image.
i. Press “Matrix/Dual/TV Wall” button to switch to Dual PoP
mode and LED unilluminate.
ii. Press output A/B and then press corresponding input 1/2. For
example: press output A then press input 1, output A will
display input 1’s image on the left side, then press output B
and then press input 2, output A will display input 2’s image
on the right side. Both output A and B will have identical
image.
iii. Dual A group are output A and B, Dual B group are output C
and D. Each group will output the same image
simultaneously.
iv. Press button A or B for 3 seconds, to switch Dual A channel’s
audio between output A or B.
v. Press button C or D for 3 seconds, to switch Dual B channel’s
audio between output C or D.
TV Wall mode: To display a source signal on to four displays as a
big screen.
i. Press “Matrix/Dual/Wall” button to switch to TV Wall mode
and LED will blink once.
ii. Press input 1~4 to select a source to 4 displays (2 by 2 Video
wall). The audio will be on output A only.
POWER
-
+
1
INPUT 234SAVERECALL
A
OUTPUT BCD
4X4 SEAMLESS MATRIX CDPS-44SM
LOCK
MATRIX/
DUAL/WALL
XGA
720P
MENU
PoP/PiP Mode
Function Buttons
Press OUTPUT A/B/C/D for 2
second to select Audio Source
from 1/2/3/4
PoP/PiP Mode
Select Video Source
Dual B
Right
Sub
Left
Main
Right
Sub
Left
Main
PiP Sub Window Size
Press for 2 seconds to enter into
PoP/PiP On(MENU,-,+ LED illuminate)
or Off(3 LED illuminate) mode.
PiP Main/Sub Swap
PiP Sub Window Position
Dual A
PoP>
PiP>
5
Dual PiP mode: To combine 2 sources to be presented on each
HDMI output port (Dual A and Dual B) as main and sub screen
image. The sub screen is in a part of the main screen.
i. Press “Matrix/Dual/TV Wall” button to switch to Dual PiP mode
and LED will blink twice.
ii. Press output A/B and then press corresponding input 1/2.
For example: press output A then press input 1, output A will
display input 1’s image as a main screen, then press output B
and then press input 2, output A will display input 2’s image
as a sub screen. Both output A and B will have identical
image.
iii. Dual A group are output A and B, Dual B group are output C
and D. Each group will output the same image
simultaneously.
iv. Press button A or B for 3 seconds, to switch Dual A channel’s
audio between output A or B.
v. Press button C or D for 3 seconds, to switch Dual B channel’s
audio between output C or D.
vi. Press “SAVE” button for 2 seconds to enter into Dual mode
operation and both “MENU” and “-” & “+” buttons will
illuminate.
Press “MENU” to swap in between the Dual PiP’s main and
sub image position, press the “-” to adjust the sub screen size
to small/medium/large and press the “+” to select sub
screen’s position from top left/right to button left/right. Press
“SAVE” button for 2 seconds to switch back to previous mode
and both “MENU” and “-” & “+” buttons will unilluminated.
Quad mode: To combine 4 sources’ to be presented on each
HDMI output port as a full image, all outputs display identical im-
age and the LED will blink three times.
i. Press A~D to select Quad 1~4 and press 1~4 to select input
sources.
ii. Press A~D for 2 second to select the audio input, only one
audio can be selected each time under Quad mode.
Autres manuels pour CDPS-44SM
2
Table des matières
Autres manuels CYP Commutateur matriciel
CYP
CYP CMSI-4H4CV Manuel utilisateur
CYP
CYP CPLUS-V4H2HP-DT Manuel utilisateur
CYP
CYP OR-HD88S Manuel utilisateur
CYP
CYP CPLUS-44PLV Manuel utilisateur
CYP
CYP PU-44XL-KIT Manuel utilisateur
CYP
CYP OR-HD24S Manuel utilisateur
CYP
CYP CMSDI-164 Manuel utilisateur
CYP
CYP OR-HD44E Manuel utilisateur
CYP
CYP OR-42UHD Manuel utilisateur
CYP
CYP CPLUS-V4H2HPIP Manuel utilisateur
CYP
CYP CMSI-48E Manuel utilisateur
CYP
CYP CMSI-8H8HC Manuel utilisateur
CYP
CYP OR-HD88HC Manuel utilisateur
CYP
CYP CMSI-8H8CV Manuel utilisateur
CYP
CYP CPLUS-V4H2HP Manuel utilisateur
CYP
CYP nT14AX16 Manuel utilisateur
CYP
CYP CMPRO-4H4H Manuel utilisateur
CYP
CYP EL-41S-4K Manuel utilisateur
CYP
CYP CMPRO-U4H4CVE Manuel utilisateur
CYP
CYP SM-2X2-HDMI-LC Manuel utilisateur
