CYP QU-DP14 Manuel utilisateur
QU-DP14
1 to 4 DisplayPort Distribution
Amplifier
OPERATION MANUAL
Disclaimers
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes
no commitment to update or to keep current the information
contained in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
Copyright Notice
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means
- electronic, mechanical, magnetic, optical, chemical, manual,
or otherwise - without express written permission and consent from
Cypress Technology.
© Copyright 2010 by Cypress Technology. All Rights Reserved.
Version 1.0 December 2010
Trademark Acknowledgments
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
Safety Precautions
Please read all instructions before attempting to unpack or install or
operate this equipment, and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
Always follow basic safety precautions to reduce the risk of
re, electrical shock and injury to persons.
To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
Never spill liquid of any kind on or into this product.
Never push an object of any kind into this product through
module openings or empty slots, as you may damage parts.
Do not attach the power supply cabling to building surfaces.
Do not allow anything to rest on the power cabling or allow it to
be abused by persons walking on it.
To protect the equipment from overheating, do not block the
slots and openings in the module housing that provide
ventilation.
Revision History
Version No Date Summary of Change
VR0 20110324 Preliminary Release
Table of Contents
1. Introduction..................................................................................1
2. Applications.................................................................................1
3. PackageContents......................................................................1
4. SystemRequirements..................................................................1
5. Features........................................................................................1
6. Specifications..............................................................................2
7. HardwareDescription.................................................................3
7.1FrontPanel..................................................................3
7.2RearPanel................................................................... 3
8. EDIDSupportFormat...................................................................4
9. ConnectionandInstallation....................................................... 5
10.Acronyms.................................................................................... 6
1
1. Introduction
The DisplayPort (DP) 1 by 4 splitter allows single DP source to be display on
four DP input monitors simultaneously. It supports video resolution up to 2560 x
1600 and audio up to PCM 7.1 switch provides a fast switch between source
and display and save EDID’s reading sink time to allow image display proper-
ly. The DP 1 by 4 splitter is an ideal device for your DP source to multi display.
2. Applications
Multi DisplayPort monitor display
Information sharing
Advertising program
3. Package Contents
1 by 4 DisplayPort Splitter
Operation Manual
5V/3 Power Adaptor
4. System Requirements
• DisplayPort output source equipment.
• DisplayPort input monitors.
5. Features
Supports DisplayPort specication V1.1a
Deep color video up to 12bit, resolution support up to 2560 x 1600
Supports audio up to PCM 7.1(32-192kHz Fs sample rate)
Supports pixel component formate with RGB; YCbCr 422; YCbCr 444
Color sapce conversion between RGB and YCbCr color space
Supports 1.62/2.7 Gbps data rate (Low/High bit rate)
Supports exible 1/2/4 lanes congurations; Full 10.8Gbps data rate-
support (4lanes at 2.7Gbps)
Supports EDID switch and setting
*Note: This device supports only DisplayPort mode, it cannot connect
DP to HDMI level shift convert.
2
6. Specications
Frequency Bandwidth 10.8Gbps (4lanes at 2.7Gbps)
Audio Sampling Rate 192kHz
Input port 1 x Displayport
Output ports 4 x DisplayPort
Power Supply 5V / 3A DC (US/EU standards, CE/FCC/UL certied)
ESD Protection Human body model: ± 8kV (air-gap discharge)
± 4kV (contact discharge)
Dimensions (mm) 270(W) x 124.5(D) x 29(H)
Weight(g) 770
Chassis Material Aluminum
Silkscreen Color Black
Power Consumption 7W
Operating Temperature 0˚C~40˚C / 32˚F ~ 104˚F
Storage temperature -20˚C~60˚C / -4˚F ~ 140˚F
Relative Humidity 20~90% RH (non-condensing)
3
7. Hardware Description
The following sections describe the hardware components of the unit.
7.1 FrontPanel
①
① Power LED: The LED will illuminate in green when power on and in red
when in reset mode.
7.2 Rear panel
① ② ③ ④ ⑤
① EDID switch INT/EXT:This switch allows user to select the built-in
EDID (INT) or the display's EDID (EXT).
Note: When the EDID switch is on EXT, the unit will detect OUTput 1's
display EDID and record in the unit. If the rst etected OUTput 1 is
not connected, it will pass to the next which is OUTput 2...... and so on
untill the display's EDID is recoreded in the unit.
w RESET: Press this button every time when switch the EDID allowing the
device to update the EDID selection.
e DP OUT 1 ~ 4: These slots are where you connect the DP cable or DP to
DP cable to your DP/DP input displayer for displaying a single source on
two screens simultaneously.
r DP IN: This slot is where you connect the DP cable from the source
equipment for signal sending.
t DC 5V: Plug the adaptor to the AC wallout for power supply to the
device.
4
8. STD Mode EDID Support Format
Video Support
VGA ●
720p ●
2560x1440 ●
Audio Support
PCM 2CH 48K ●
PCM 2CH 44.1K ●
PCM 2CH 32K ●
5
9. Connection and Installation
6
Acronyms A
Acronym Complete Term
EDID Extended Display identication Data
DP DisplayPort
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels CYP Amplificateur
CYP
CYP CMPRO-4H2H Manuel utilisateur
CYP
CYP AU-A200 Manuel utilisateur
CYP
CYP CHDMI14 Manuel utilisateur
CYP
CYP QU-210S Manuel utilisateur
CYP
CYP CDB-6HP Manuel utilisateur
CYP
CYP QU-18D Manuel utilisateur
CYP
CYP CHDMI14 Manuel utilisateur
CYP
CYP QU-DV12 Manuel utilisateur
CYP
CYP QU-12S Manuel utilisateur
CYP
CYP QU-16E Manuel utilisateur
CYP
CYP AU-D820S Manuel utilisateur
CYP
CYP AU-A300 Manuel utilisateur
CYP
CYP PRO-3GSDI44 Manuel utilisateur
CYP
CYP CHDMI-4 Manuel utilisateur
CYP
CYP QU-DP13EX Manuel utilisateur
CYP
CYP CS-PM Manuel utilisateur
CYP
CYP QU-110S-4K22 Manuel d'installation
CYP
CYP AU-A220 Manuel utilisateur
CYP
CYP QU-8-4K22 Manuel utilisateur
CYP
CYP EHD-8 Manuel utilisateur
