Crestron Isys TPS-4500 Manuel utilisateur

TPS – 6000, 5000 & 4500 INSTALLATION GUIDE

INDEX:

A) CONNECTING THE TPS PANEL USING THE TPS-IMC

1) CONNECTING THE TPS PANEL TO THE TPS-IMC

2) CONNECTING THE AUDIO TO THE TPS-IMC

3) CONNECTING THE VIDEO TO THE TPS-IMC

4) CONNECTING THE RGB TO THE TPS-IMC

B) CONNECTING THE TPS PANEL USING THE TPS-IMC-BV

1) CONNECTING THE TPS PANEL TO THE TPS-IMC-BV

2) CONNECTING THE AUDIO TO THE TPS-IMC-BV

3) CONNECTING THE VIDEO TO THE TPS-IMC-BV

4) CONNECTING THE RGB TO THE TPS-IMC-BV

C) CONNECTING THE TPS PANEL USING THE TPS-IMW

1) CONNECTING THE TPS PANEL TO THE TPS-IMW

2) CONNECTING THE AUDIO TO THE TPS-IMW

3) CONNECTING THE VIDEO TO THE TPS-IMW

4) CONNECTING THE RGB TO THE TPS-IMW

D) CONNECTING ETHERNET TO THE TPS PANEL

E) CUSTOM INSTALLATION & CABLES

1) TPS-BLOCK10

2) TPS CABLES

CONNECTING THE TPS PANEL USING THE TPS-IMC

Panel Connection for 6000, 5000 and 4500.

- One supplied with each TPS-5000 and TPS-6000; add additional units to provide

connectivity at multiple locations.

- Provides breakout from the 10-pin Net/Video cable and 9-pin audio cable (15’ included

with touchpanel; other lengths available.)

- For Cresnet only, TPS-IMC is not mandatory if audio and video are not being used,

although a custom 10-pin cable solution would be required (see TPS-Block10 below.)

1) CONNECTING THE TPS PANEL TO THE TPS-IMC

2) CONNECTING THE AUDIO TO THE TPS-IMC

Audio is available for the TPS-6000 and 5000.

- TPS-IMC supports balanced and unbalanced signals.

3) CONNECTING THE VIDEO TO THE TPS-IMC

Video is available for the TPS-6000, 5000 and 4500.

- TPS-IMC supports balanced and unbalanced video.

Before video can be enabled the TPS-VID card must be installed.

(For further information on installation please reference the TPS-VID manual)

Connect to a video source only if the TPS-VID expansion card is installed in the touchpanel. The BNC connector and screw

terminal mini Phoenix connector is connected in parallel. Possible options are no connection, balance video using twisted pair

cable, unbalance video using twisted pair cable, or unbalanced video using coax cable. Depending on the option, the two jumpers

on the NTSC/PAL VIDEO six-pin connector remain attached or are removed.

4) CONNECTING THE RGB TO THE TPS-IMC

RGB is only available for the TPS-6000 and 5000.

Note: RGB video does not pass though the TPS-IMC. (see below)

Before RGB video can be enabled the TPS-XVGA must be installed.

(For further information on installation please reference the TPS-XVGA manual)

RGB(15PIN DB CONNECTION

CONNECTING THE TPS PANEL USING THE TPS-IMC–BV

Panel Connection for 6000 and 5000.

Provides all of the functionality of a reqular TPS-IMC and adds buffering and

breakout for the 10-pin balanced XVGA cable, and a 8-pin audio cable.

Add additional units to provide connectivity at multiple locations.

1) CONNECTING THE TPS PANEL TO THE TPS-IMC-BV

NET/VIDEO(10PIN/RJ45)

RGB(10PIN/RJ45)

AUDIO(8PIN/RJ45)

2) CONNECTING THE AUDIO TO THE TPS-IMC-BV

Audio is available for the TPS-6000 and 5000.

The TPS-IMC-BV supports Balanced and Unbalanced inputs.

3) CONNECTING THE VIDEO TO THE TPS-IMC-BV

Video is available for the TPS-6000, 5000 and 4500.

Before video can be enabled the TPS-VID card must be installed.

(For further information on installation please reference the TPS-VID manual)

Connect to a video source only if the TPS-VID expansion card is installed in the touchpanel. The BNC connectors and RJ45

connector are connected in parallel. Use one or the other. For balanced video, use the RJ45.

4) CONNECTING THE RGB TO THE TPS-IMC-BV

RGB is only available for the TPS-6000 and 5000.

- Alternate XVGA card for TPS-6000 and 5000.

- Provides a 10-pin connector directly on the back of the touchpanel base.

- TPS-IMC-BV ships with 15’ triamese cable consisting of a 10-pin net/video cable, a 10-

pin balanced XVGA cable, and an 8-pin audio cable.

- Also included is the TPS-IMC-BV.

Before RGB video can be enabled the TPS-XVGA-BV must be installed.

(For further information on installation please reference the TPS-XVGA-BV manual)

15 PIN DB CONNECTION

CONNECTING THE TPS PANEL USING THE TPS-IMW

Panel Connection for 6000, 5000 & 4500

2-Gang wall-mount version of TPS-IMC.

If audio is not required, substitute TPS-4500IMW.

1) CONNECTING THE TPS PANEL TO THE TPS-IMW

2) CONNECTING THE AUDIO TO THE TPS-IMW

Audio is available for the TPS-6000 and 5000.

TPS-IMW supports balanced and unbalanced audio.

3) CONNECTING THE VIDEO TO THE TPS-IMW

Video is available for the TPS-6000, 5000 and 4500.

TPS-IMW supports balanced and unbalanced video

Before video can be enabled the TPS-VID card must be installed.

(For further information on installation please reference the TPS-VID manual)

Connect to a video source only if the TPS-VID expansion card is installed in the touchpanel. Possible options are

no connection, balance video using twisted pair cable, or unbalance video using twisted pair cable. Depending on

the option, the two jumpers on the NTSC/PAL VIDEO six-pin connector remain attached or are removed.

Autres manuels pour Isys TPS-4500

Ce manuel convient aux modèles suivants

Autres manuels Crestron Écran tactile

Crestron

Crestron TPMC-4SMD-FD Instructions d'utilisation d'origine

Crestron

Crestron TSW-730 Manuel utilisateur

Crestron

Crestron Isys TPS-12L Manuel utilisateur

Crestron

Crestron TS-1542 Manuel du propriétaire

Crestron

Crestron Prodigy PTX3 Manuel utilisateur

Crestron

Crestron TSW-70 Series Manuel utilisateur

Crestron

Crestron TPMC-3X Series Manuel utilisateur

Crestron

Crestron CT-3500 Manuel utilisateur

Crestron

Crestron CT-1000 Manuel utilisateur

Crestron

Crestron Isys i/O TPMC-15-CH Manuel utilisateur

Crestron

Crestron TSW-560 Manuel du propriétaire

Crestron

Crestron SmarTouch STS ST-1550C Manuel utilisateur

Crestron

Crestron STX-1550C Manuel utilisateur

Crestron

Crestron TPS-17B/W Manuel utilisateur

Crestron

Crestron STX-1550CW Manuel utilisateur

Crestron

Crestron TPMC-V12-WALL Manuel utilisateur

Crestron

Crestron TPMC-4XG Manuel utilisateur

Crestron

Crestron Isys TPMC-4SM Comment utiliser

Crestron

Crestron TSW-570PR Series Manuel utilisateur

Crestron

Crestron TSW-570P Manuel utilisateur

Crestron

Crestron TSW-570 Manuel utilisateur

Crestron

Crestron Isys i/O TPMC-8X Manuel utilisateur

Crestron

Crestron ST-1700CIR Manuel utilisateur

Crestron

Crestron TPS-FPAR3100L Manuel utilisateur

Manuels Écran tactile populaires d'autres marques

FlowLine

FlowLine Data loop Manuel utilisateur

ALPEX

ALPEX AEx-8 P Series Manuel utilisateur

Ltech

Ltech E5S Manuel utilisateur

Harman

Harman AMX MODERO S MSD-701-L2 Manuel utilisateur

Acnodes

Acnodes PC 1150 Manuel utilisateur

AIS

AIS IP10IA99 series Manuel utilisateur

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manuel utilisateur

YASKAWA

YASKAWA TP 610C Manuel utilisateur

B&R

B&R Power Panel C Series Manuel utilisateur

Beijer Electronics

Beijer Electronics X2 control Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT321W-521 Manuel utilisateur

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manuel utilisateur

Qomo

Qomo QIT1386 Manuel utilisateur

DFI

DFI KS104-CD Manuel utilisateur

AMX

AMX AXP-PPC Mode d’emploi

Sartorius

Sartorius X3 PR 5410 Manuel utilisateur

AMX

AMX Modero X Series Manuel utilisateur

Advantech

Advantech TPC-30 Series Manuel utilisateur