Crestron TSW-UMB-60 Manuel utilisateur

TSW-UMB-60/-60-PMK/-560P-PMK

Touch Screen Mounting Bracket/Kits

Installation Guide

Additional Resources

Visit the product page on the Crestron website

(www.crestron.com) for additional information and the

latest rmware updates. Use a QR reader application

on your mobile device to scan the QR image.

TSW-UMB-60 TSW-UMB-60-PMK

TSW-UMB-60 Installation

Use the included cutout template to ensure that the

correct dimensions are retained during the installation

process.

The template provides dimensions for installing the

bracket horizontally (for the TSW-560, TSW-760, or

TSW-1060) and vertically (for the TSW-560P).

3.75 in

(96 mm)

2.20 in

(52 mm)

TSW-UMB-560P-PMK

Description

The TSW-UMB-60 is a universal mounting bracket that

can be used with the Crestron® TSW-560, TSW-760,

and TSW-1060 touch screens, as well as with the

TSW-560P portrait touch screen. The TSW-UMB-60 is

designed for postconstruction installation in existing

drywall or paneling. The bracket is also suitable for use

in a lectern or a podium.

For preconstruction applications, the TSW-UMB-60 can

be installed along with the TSW-UMB-60-PMK or

TSW-UMB-560P-PMK preconstruction mounting kits.

The TSW-UMB-60-PMK and TSW-UMB-560P-PMK

permit fastening to the left- or right-hand stud of a

framed wall prior to the installation of drywall for

landscape and portrait touch screen installations,

respectively.

To install the TSW-UMB-60, follow the below steps:

CAUTION: Allow an air gap of at least

12" (305 mm) in the wall cavity above and below the

TSW-UMB-60 for heat dissipation.

1. Place the included cutout template (40151) in the

desired location, ensuring it is level. Place the

template horizontally if installing the TSW-560,

TSW-760, or TSW-1060, or place the template

vertically if installing the TSW-560P.

2. Trace the cutout all the way around the opening,

and then cut the hole with an appropriate drywall

saw.

NOTE: Do not remove the screws holding the

two parts of the assembly together.

3. Loosen the two screws on the mounting bracket,

and then install the assembly into the opening,

bottom rst, as shown in the illustrations that

follow steps four and ve.

For portrait mounting, install the assembly into the

opening left side rst so that the “TOP” text on

the inside of the back box is facing to the right.

Installing the Assembly into the Opening

CAUTION: To avoid damage to the

TSW-UMB-60, do not overtighten the screws.

TSW-UMB-60

TSW-UMB-60 Cutout Template Dimensions

4. Reach into the TSW-UMB-60 assembly and push

the rear half back to ensure it is fully behind the

mounting surface. Ensure the front of the

TSW-UMB-60 assembly is level.

For portrait mounting, allow the bracket to angle

into the opening (left side rst) before tightening.

Pushing the Rear Half Behind the Mounting Surface

Push the top surface

downward to install

the bottom half rst.

TSW-UMB-60

Loosen both

of the screws.

5. Tighten the two screws to complete the

installation.

Completing the Assembly

Push the rear half

back.

Ensure the front

is level, and then

tighten both screws.

TSW-UMB-60/-560P-PMK Installation

The TSW-UMB-60-PMK supports preconstruction and

postconstruction mounting applications for the

TSW-560, TSW-760, and TSW-1060 touch screens,

while the TSW-UMB-560P-PMK supports

preconstruction and postconstruction mounting

applications for the TSW-560P portrait touch screen.

• For preconstruction applications, use standard

drywall nails or screws to attach the PMK to a

wall.

CAUTION: Allow an air gap of at least

12" (305 mm) in the wall cavity above and below

the TSW-UMB-60 for heat dissipation.

Attaching the TSW-UMB-60-PMK to a Wall

• For postconstruction applications, use the PMK

as a cutout template by turning it to face the wall,

ensuring it is level, and temporarily tacking it to

the wall with nishing nails in the smaller holes

around the cutout opening. Trace the cutout

opening with an appropriate drywall saw.

TSW-UMB-60-PMK

Use a tie wrap to hold

the cable until the touch

screen is mounted.

Use a tie wrap to hold

the cable until the touch

screen is mounted.

TSW-UMB-560P-PMK

Attaching the TSW-UMB-560P-PMK to a Wall

Product warranty can be found at

www.crestron.com/warranty.

The specic patents that cover Crestron products are listed at

patents.crestron.com.

Certain Crestron products contain open source software. For

specic information, please visit

www.crestron.com/opensource.

Crestron and the Crestron logo are either trademarks or

registered trademarks of Crestron Electronics, Inc. in the

United States and/or other countries. Other trademarks,

registered trademarks, and trade names may be used in this

document to refer to either the entities claiming the marks

and names or their products. Crestron disclaims any

proprietary interest in the marks and names of others.

Crestron is not responsible for errors in typography or

photography.

This document was written by the Technical Publications

department at Crestron.

Crestron Electronics, Inc. Installation Guide

15 Volvo Drive DOC. 7911B

Rockleigh, NJ 07647 (2047690)

Tel: 888.CRESTRON 03.17

Fax: 201.767.7576 Specications subject to

www.crestron.com change without notice.

Ce manuel convient aux modèles suivants

Autres manuels Crestron Support et étagère

Crestron

Crestron TSW-560 Manuel utilisateur

Crestron

Crestron TSW-550-BBI Manuel utilisateur

Crestron

Crestron RMK-1600 Manuel utilisateur

Crestron

Crestron BB-1000L Manuel utilisateur

Crestron

Crestron ST-RMK Manuel utilisateur

Crestron

Crestron TMK-12L Manuel utilisateur

Crestron

Crestron C2N-IIF-SPMK Manuel utilisateur

Crestron

Crestron TMK-4L Manuel utilisateur

Crestron

Crestron CPC-TMT Comment utiliser

Crestron

Crestron TSW-UMB-70-BBI Manuel utilisateur

Crestron

Crestron WMKB-1000L Manuel utilisateur

Crestron

Crestron WMK-3200 Manuel utilisateur

Crestron

Crestron Mud Ring Mount Kit for Cameo 2 MMK-CBF-T Manuel utilisateur

Crestron

Crestron MP-WP-2XLRO-1G Manuel utilisateur

Crestron

Crestron MMK-1000L Manuel utilisateur

Crestron

Crestron RMK-9L Manuel utilisateur

Crestron

Crestron CBLR Series Manuel utilisateur

Crestron

Crestron TS-7-MSMK Manuel utilisateur

Crestron

Crestron TSW-UMB-PMK Manuel utilisateur

Crestron

Crestron MMK-2000L Manuel utilisateur

Crestron

Crestron SMK-6X Manuel utilisateur

Crestron

Crestron PMK-17L Manuel utilisateur

Crestron

Crestron TSW-730-MSMK Manuel utilisateur

Crestron

Crestron FlipTop Basic FT-600 Comment utiliser

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur