CommScope CPPR-QF-F-1U-E Manuel utilisateur

Instruction manual for Foldable UCP Patch Panel

5. INSTALLATION OF FIBER OPTIC MODULES

5.1 Installation of MPO cassettes

5.1.1 12 ﬁber MPO cable

- Attach the white cable clips and position the cable tie.

- Install midi fan-out

- First clean MPO connector end face in the rear of the cassette, then insert the Quick-Fit

MPO cassette into the UCP panel. Next clean the MPO connector end face from the incoming

cable, dressing it into the cable clips at the rear of the panel (maintaining a minimum bend

radius of 50mm at all times). Finally, connect the incoming MPO cable to the MPO cassette.

5.1.2 24 ﬁber MPO cable

- Attach the white cable clips, position the

cable tie and install the midi fan-out.

- Same as 5.1.1

Note: Unused ports can be covered by blank Quick-Fit modules.

1.SCOPE

1.1 Purpose

The purpose of this speciﬁcation is to provide speciﬁc instructions for assemble instruction

for retention packs.

1427592-1

Item Description Unit Qyt

PCS

Panel with Arms

Rear Bracket

Grounding Nuts

M6 Screw /nut/gasket

Fiber Bracket

Hook and Loop Tie

3.ASSEMBLY REQUIREMENTS

3.1 Rotate the arm 3.2 Fix the rear bracket with panel

3.3 Install the grounding bolt at the back of

the panel

3.4 Fix the panel in cabinet with screws

1427544-1

Part number：1427544-1 – Flat 1427592-1 – Angled

2.FOLDABLE UCP PATCH PANEL KITS CONTENTS

Instruction Manual

411-102033

2023 May Rev D

411-102033

Rev.D

To obtain information on CommScope

products,

contact your local CommScope

account

representative, PartnerPRO

™

Network Partner

or visit our website at www.commscope.com

4.INSTALLATION OF COPPER MODULES

4.1 Installation of MRJ21 cassettes

-Insert the MRJ21 & MRJ21 XG cassette -Connect the MRJ21 connector

-Secure the cable with hook-and-loop fasteners

4.2 Installation of pre-terminated cable bundle

- Fee the pre-terminated bundle through the cut Out in the panel

- Insert all the connectors into the Quick-Fit module

- Insert the Quick-Fit module into the panel, and Secure the cable bundle

with hook-and-loop fasteners

4.3 Installation of Sigma-Link Modules

- Insert the Sigma-Link front cover

- Insert the Sigma-Link assembly into the opening of the Patch panel. Check TOP

marking on the module and front cover. An audible click indicates the cassette is in position.

- Secure the cable with hook-and-loop fasteners

- To remove the assembly: push the side-taps outward whilst at the same time pulling

the cable bundle towards the rear of the panel.

411-102033

Rev DRev D

411-102033

2023 May Rev D

Ce manuel convient aux modèles suivants

Autres manuels CommScope Matériel réseau

CommScope

CommScope M3200 Manuel utilisateur

CommScope

CommScope MRJ21 Quick Fit Cassette Manuel utilisateur

CommScope

CommScope AMP NETCONNECT MRJ21 Manuel utilisateur

CommScope

CommScope UNJ10G Manuel utilisateur

CommScope

CommScope SYSTIMAX 360 iPatch G2 MPO Manuel utilisateur

CommScope

CommScope NG4access ODF Platform Value-Added Module Manuel utilisateur

CommScope

CommScope Constellation CPT-PP-48C Manuel utilisateur

CommScope

CommScope NOVUX DSC 650 Manuel utilisateur

CommScope

CommScope LSX Manuel utilisateur

CommScope

CommScope FPX Series Manuel utilisateur

CommScope

CommScope NOVUX SEC 100 Manuel utilisateur

CommScope

CommScope FDC-W8-FAT Manuel utilisateur

CommScope

CommScope CPP-UDDM-SL-1U-24 Manuel utilisateur

CommScope

CommScope NETCONNECT 1479542-1 Manuel utilisateur

CommScope

CommScope ION-U EU H 7P/80-85P/17P/19P Manuel utilisateur

CommScope

CommScope ION-M7P Manuel utilisateur

CommScope

CommScope ONECELL RP5200 Manuel

CommScope

CommScope OneCell RP5000 Series Mode d’emploi

CommScope

CommScope FPX Series Manuel utilisateur

CommScope

CommScope ION-M23 SDARS Manuel utilisateur

CommScope

CommScope EHD Manuel utilisateur

CommScope

CommScope SCIL-B Manuel utilisateur

CommScope

CommScope Mini-OTE 300 Manuel utilisateur

CommScope

CommScope NG4access ODF Platform Value-Added Module Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur