Clearaudio Master Innovation Manuel utilisateur
User manual
© clearaudio
electronic GmbH, 2017/11 Made in Germany
Innovation
Innovation
Picture: Package with
Clearaudio tonearm „TT3“
and Clearaudio cartridge
„Titanium V2 “.
Innovation Wood
Picture: Package with
Clearaudio tonearm
„Universal“ and Clearaudio
cartridge „da Vinci V2 “.
Dear Clearaudio customer,
Congratulation’s to your choice of the
Innovation / Innovation Wood
(in the following:
Innovation
named) turntable, a world class turntable, handmade in Germany by Clearaudio electronic GmbH.
Resonance minimizing chassis construction in a sandwich in combination with the innovative motor
unit (low noise level and high turning moments), guarantees total isolation of resonances from the
turntable chassis, providing the best music reproduction and authentic High End imaging. A high
precision, maintenance free sinter bronze bearing is completing the analogue pleasure.
The Clearaudio patented CMB-Bearing-Technology, an inverted bearing with jewelled and polished
ceramic bearing shaft and a bronzed liner, provides frictionless analog enjoyment.
Please read this instruction manual carefully, to avoid any damages or loss of warranty.
This manual will help you for an easy setup and guarantees the highest pleasure for a long time.
We wish you a lot of musical enjoyments with your new Clearaudio
Innovation
turntable.
Clearaudio electronic GmbH
This section must be read before any connection is made to the mains supply.
WARNINGS
Don’t expose your turntable to rain or humidity.
Don’t handle the mains leads with wet hands.
Don’t place or insert anything into the equipment or through ventilation holes.
No naked ame sources, such as lighted candles, should be placed on the equipment.
CE-MARKING
EQUIPMENT MAINS WORKING SETTING
Your Clearaudio product has been prepared to comply with the household power and safety requi-
rements that exist in your area. This product can be connected to 230 V or 110 V AC (50 Hz and
60 Hz).
COPYRIGHT
Recording und reproduction of any sound-material may require the consent of the creator. Please
acknowledge the information given in the
- Copyright Act 1956,
- Dramatic and Musical Performers Act 1958,
- Performers Protection Acts 1963 and 1972,
- Any more recent legal regulations.
The Clearaudio
Innovation
meets the regulations concerning electromagnetic
disturbance (EMC) and low-voltage appliances.
User manual
2 © clearaudio electronic GmbH, 2017/11
Contents
1. Packing overview ................................................ 4
2. List of components .............................................. 5 - 6
3. Installation and setup ......................................... 7 - 12
4. Fine adjustment of the motor ............................. 13
5. Service and special instruction ........................... 14
6. Technical data ..................................................... 15
Warranty information ..............................................16
Stroboscope Testrecord user manual ...................... 17 -18
User manual
Made in Germany 3
1. Packing overview
Pic. 1: Packing overview
Accessories,
user manual,
warranty card,
Clearaudio Quality
Card,
Stroboscope Testre-
cord
Innovation
turntable chassis incl.
mounted lower bea-
ring part and integra-
ted motor unit;
optional: Tonearm
Stainless steel-sub-
platter; Delrin or Ac-
rylic platter;
power supply;
upper bearing part
and – cap
optional: Cartridge
User manual
4 © clearaudio electronic GmbH, 2017/11
2. List of components
Clearaudio has developed a special and secure packing for your
Innovation
turntable that ensures
a safe transportation. Please keep this original packing, if you need to ship the turntable.
Below you nd the part list of the Clearaudio
Innovation
turntable:
Pic. 2: List of components
123
4
7a 7b
1. Turntable body with mounted
lower bearing part 5. Bearing part
2. Stainless steel sub-platter 6. 3 x Flat Pads
3. Delrin or Acrylic (Wood version)
turntable platter 7. Optional: Clearaudio
Universal
(7 a) or
Magnify
(7 b) tonearm with counterweight
to adjust the tracking force
4. Power supply 8. Mounting clip for stainless steel sub-platter
and hex wrench
Pic. 7b: Clearaudio
Magnify
tonearm
Pic. 7a: Clearaudio
Universal
tonearm
56
8
User manual
Made in Germany 5
Continuation of components list
910 11
12 13 14
15 16 a 17
9. 1 Pair of white gloves 15. Bearing oil for occasional use
10. Grounding - wire for the Innovation
turntable (to connect in the bottom
bearing part) 16 a
16 b
Optional in package:
Clearaudio MC cartridge
da Vinci
Clearaudio MC cartridge
Talismann
Clearaudio
Smart Stylus Gauge
11. Level gauge for the turntable
alignment 17. Clearaudio
Stroboscope Testrecord
(Art. No. AC038) to adjust the exact speed
12. 1 pcs. at belt 18. Optional in package:
Turntable + tonearm + cartridge
No illustration:
Cartridge alignment gauge
for
Unify
or
Universal
tonearm (optional)
13. 4 pcs. hex wrench; sizes: #1,5; #
2,5; #3; #7 19. Not shown: warranty card, Clearaudio
Quality Card, Sales return paper
14. Screw driver 17. Not shown: User Manual
Pic. 2.1: List of components
IMPORTANT NOTICE:
Please double check the tightness of all bolts, hardware, and mounting pods, as temperature
uctuations during transit may have caused the hardware to become loose.
16 b
User manual
6 © clearaudio electronic GmbH, 2017/11
3. Installation and setup
The setup of the
Innovation
turntable is easy as the turntable chassis is pre-assembled and has been
tested at the factory.
Please use the white gloves enclosed in order to avoid scratches or unwanted ngerprints (platter).
The
Innovation
turntable requires a space for setup of at least 18.90 inch x 19.29 inch.
18.90 inch
/ 480 mm
19.29 inch / 490 mm
Pic. 3: Required set - up space
User manual
Made in Germany 7
Please follow the description step by step:
1.)
First take out the three black at pads out of the accessory bag.
Place these at pads on your hi-rack or another suitable base, where the nal position of your
Innovation
turntable will be.
2.)
After that, take the Innovation turntable body of the next packing layer and place the spikes of the
turntable on the at pads.
Pic. 4:
Innovation
with tonearm base
Pic. 6: Oiling the bearing shaft
3.)
To avoid hum noises we recommend to ground the bearing. For that attach the supplied grounding
wire to the bearing cap with the existing screw.
Pic. 5: Grounding the bearing of the
Innovation
4.)
Remove the protective security tape from the bearing housing.
Place two drops of the synthetic bearing oil on the ceramic bearing shaft.
(also available at www.analogshop.de, Art. No. AC068)
User manual
8 © clearaudio electronic GmbH, 2017/11
5.)
Take the stainless steel platter with both hands carefully out of the box.
Remove the lamination of the scale ring on the lower side of the turntable.
Please remove the lamination extreme carefully and avoid any soiling and scratches.
Push the delivered bearing part carefully through the hole in the stainless steel sub-platter and
mount the bearing part with the sub-platter by using the mounting clip.
6.)
In the next step remove the lamination of the sensor, mounted on the turntable chassis (picture 6:
red frame).
Please remove the lamination extreme carefully and avoid any soiling and scratches.
Pic. 7: Connection sub-platter and bearing upper part
Pic. 8: Removing the lamination
7.)
With both hands you can place the stainless steel platter
carefully onto the bearing.
Through a lightly (!!) up and down movement the platter
will slip onto the bearing upper part (picture 8).
Make sure with gentle pressure that the platter is applying
on the complete surface of the bearing.
Avoid major side forces to avoid any damages to
the ceramic bearing! Pic. 9: Setup stainless steel platter with
upper bearing part
User manual
Made in Germany 9
8.)
Now you can remove the mounting clip with the delivered hex wrench.
9.)
Take the Delrin platter with both hands out of the box and set
the platter carefully onto the bearing.
The at side of the platter should face to the stainless steel
platter and the side with the cut-out (for the record) should
face up.
To avoid any damages on your bearing, the Delrin platter
should have room temperature before the setup begins
(approx. 20 ° Celsius).
Avoid major side forces to avoid any damages to the
ceramic bearing!
Pic. 10: Removing of the mounting clip
Pic. 11: Setup Delrin platter and bearing cap
You will nd suitable adjustment equipment under www.clearaudio.de or www.analogshop.de.
10.)
To install the tonearm, please follow the user manual of the manufacturer.
User manual
10 © clearaudio electronic GmbH, 2017/11
Autres manuels pour Master Innovation
7
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Clearaudio Platine
Clearaudio
Clearaudio smart power 12V Manuel utilisateur
Clearaudio
Clearaudio Master Innovation Manuel utilisateur
Clearaudio
Clearaudio Avantgarde Manuel utilisateur
Clearaudio
Clearaudio Innovation Compact Manuel utilisateur
Clearaudio
Clearaudio Peerformance Manuel utilisateur
Clearaudio
Clearaudio Champion Manuel
Clearaudio
Clearaudio Performance DC Manuel utilisateur
Clearaudio
Clearaudio Master Innovation Black Manuel utilisateur
Clearaudio
Clearaudio Smart Matrix Manuel utilisateur
Clearaudio
Clearaudio Performance DC Manuel utilisateur
Clearaudio
Clearaudio Smart matrix professional Manuel utilisateur
Clearaudio
Clearaudio Master Innovation Series Manuel utilisateur
Clearaudio
Clearaudio Master Solution Manuel utilisateur
Clearaudio
Clearaudio Melody V2 Manuel utilisateur
Clearaudio
Clearaudio Performance DC Manuel utilisateur
Clearaudio
Clearaudio TT1-MI Manuel utilisateur
Clearaudio
Clearaudio Ovation Manuel utilisateur
Clearaudio
Clearaudio Concept Manuel utilisateur
Clearaudio
Clearaudio Ovation Manuel utilisateur
Clearaudio
Clearaudio Satisfy Manuel utilisateur
