Clearaudio Concept Manuel utilisateur

Hi-Fi Components clearaudio electronic®GmbH

Spardorfer Str. 150 D-91054 Erlangen Tel. +49 9131 40300100 FAX +49 9131 40300119

www.clearaudio.de www.analogshop.de info@clearaudio.de copyright clearaudio2015

Made in Germany

Version-2.9_05.10..2015_E+D

concept / concept wood

User manual

Bedienungsanleitung

Concept

User manual / Bedienungsanleitung

Page/ Seite 1 clearaudio electronic GmbH 2015

Dear Clearaudio customer,

Thank you for purchasing the Clearaudio

concept

wood

turntable.

The Clearaudio

concept -

turntable sets a new timeline in turntable manufacturing.

Highest demands and Made in Germany, combined with technology and a timeless design

start a New Era.

The

concept

is equipped with the innovative

concept

tonearm using a friction free magnetic

bearing technology.

A high quality moving magnet cartridge is completing this set up. All parameters have been

already adjusted at the Clearaudio factory, even the tracking- and anti-skating force are

adjusted. This genuine, timeless and modern design guarantees a flawless musical

enjoyment for decades.

Please read this instruction manual carefully, to avoid any damages or loss of warranty.

This manual will help you for an easy set-up and guarantees the highest pleasure for a long

time.

We wish you a lot of listening pleasure with your new Clearaudio

concept

concept wood

turntable.

Clearaudio electronic GmbH

This section must be read before any connection is made to the mains supply.

CE-MARKING

The Clearaudio

concept

meets the regulations concerning electromagnetic disturbance

(EMC) and low-voltage appliances.

EQUIPMENT MAINS WORKING SETTING

Your Clearaudio product has been prepared to comply with the household power and safety

requirements that exist in your area. This product can be connected to INPUT: 100 V –240 V

~/ 50 –60 Hz / 150 mA; OUTPUT: 12 V= / 450 mA

Recording und reproduction of any sound-material may require the consent of the creator. Please

acknowledge the information given in the

-Copyright Act 1956,

-Dramatic and Musical Performers Act 1958,

-Performers Protection Acts 1963 and 1072,

-any more recent legal regulations.

Concept

User manual / Bedienungsanleitung

Page/ Seite 2 clearaudio electronic GmbH 2015

Page

User manual 1 –8

Bedienungsanleitung 9 - 16

Contents Page

1. Packing overview 3

2. Package contents 3

3. Set-up 4

4. Important notes 6

5. Service 7

6. Technical data 8

Warranty information 17

Concept

User manual / Bedienungsanleitung

Page/ Seite 3 clearaudio electronic GmbH 2015

1. Packing overview

Clearaudio has developed a special and secure packing for your

concept

turntable that

ensures a safe transportation.

Please keep this original packing, if you need to ship the turntable.

2. Package contents

Turntable chassis with tonearm,

cartridge and drive belt on sub-platter

Accessories: Level gauge, allen key

(Size 2), drive belt, , power supply

(incl. adaptors: EU, UK; US),

Bearing oil, User manual, Return

delivery note, Warranty Card

Turntable platter

IMPORTANT NOTICE: Please double check the tightness of all bolts and armboard

mounting hardware, as temperature fluctuations during transit may have caused the

hardware to become loose.

Accessories box,

user manual,

warranty card,

return delivery

note

Turntable platter

concept

turntable chassis

incl. integrated

motor unit and

tonearm with

cartridge

2. Second layer

1. First layer

Concept

User manual / Bedienungsanleitung

Page/ Seite 4 clearaudio electronic GmbH 2015

3. Set-up

Setting up the

concept

turntable is easy. The turntable chassis, tonearm and cartridge are

already assembled and all key parameters have been pre-adjusted and tested at the

Clearaudio factory.

The c

oncept

turntable requires a place for set-up

Location of at least 17 inch x 14 inch.

1.)

First take the

concept

turntable chassis out of the

package and place it on a suitable surface. Then

remove the drive belt from the plastic bag.

2.)

Place the drive belt around the sub-platter and around

the motor pulley.

3.)

Take the platter out of the package and carefully

Place it with both hands onto the shaft.

4.)

Carefully remove the adhesive security

tape and further security materials from the

tonearm and the cartridge.

5.)

As all key parameters have been adjusted at the

Clearaudio factory, all you need to do is to level

The turntable using the level gauge provided.

to 1.)

to 2.)

to 3.)

to 4.)

to 5.)

Concept

User manual / Bedienungsanleitung

Page/ Seite 5 clearaudio electronic GmbH 2015

6.)

If your

concept

turntable is not in a perfectly

level position, as indicated by the bubble of the

level gauge not being positioned in the centre

of the black circle, you can adjust the turntable’s

feet by turning them clockwise or anti-clockwise

until you reach a perfectly level position. You

can then lock in the ideal position of the spikes

using the lock screw. You will only get the best

sound from your

concept

turntable if the turntable

is in a perfectly level position.

7.)

Connect one of the external

Power supply provided to the

socket on the rear of

the

concept

turntable

and the other end to a live AC outlet.

Then connect the tonearm cable to your phonostage.

Your

concept

turntable is now completely set up and ready to play.

We wish you a lot of listening pleasure!

to 6.)

Concept

User manual / Bedienungsanleitung

Page/ Seite 6 clearaudio electronic GmbH 2015

4. Important notes

Adjustment of the tracking force

Never check or adjust the tracking force when there is a record on the platter. Always

remove the record first. The pre-adjusted and recommended tracking for the Clearaudio

concept

MM cartridge is 2.4 grams (+/- 0.2 grams) and for the Clearaudio

concept

cartridge 2.2 grams (+/- 0.2 grams).

Adjustment of the tonearm height

As everything on the turntable is pre-assembled and tested, including tonearm and

cartridge, there is usually no need to change any parameters on the

concept

turntable.

If you want to change the height of your tonearm please refer to your nearest qualified

dealer or service personnel.

Your dealer can make the height adjustment by loosening the locking screw on the side of

the tonearm base of your turntable (see pic. 8).

Clearaudio assumes no liability for wrong handling or any damages, if non

qualified persons take any action on adjustments.

Adjustment of the Anti-skating force

Again, as everything on the turntable is pre-assembled and tested, including tonearm and

cartridge, there is usually no need to change any of the

concept

turntable parameters. If you

want to change your cartridge and to adjust the Anti-skating force please refer to your

nearest qualified dealer or service personnel. Your dealer will find the Anti-skating adjuster

on the underside of the turntable.

Your dealer will find the Anti-skating –bolt on the underside of the turntable (see pic. 9).

Pic. 9: Adjustment of the Anti-skating

Pic. 8: Adjustment of the tonearm height

Concept

User manual / Bedienungsanleitung

Page/ Seite 7 clearaudio electronic GmbH 2015

Again, Clearaudio assumes no liability for incorrect handling or any damages, if

non-qualified persons attempt the above adjustments.

IMPORTANT:

For any transportation of the

concept

turntable, please ensure that the platter is packed with

the upper surface facing downwards into the packaging. Please ensure that you fully retract

the turntable feet.

Further transportation advice:

For any transportation of the

concept

turntable, please always remove the turntable platter

(see above) and fix the tape holding the sub-platter as well as the tonearm and the cartridge

stylus protection. Otherwise serious damage can occur.

Clearaudio assumes no liability for damages that may occur due to wrong

packing!

Attention:

If the turntable is not in use, disconnect the unit completely from the power

supply by removing the main plug from the socket.

5. Service

If any servicing or repair on a Clearaudio product is necessary, please contact your dealer /

distributor or contact Clearaudio directly. We can advise you of your nearest service

location.

PLEASE RETAIN ALL ORIGINAL PACKAGING. You will need it if your turntable needs to

be transported and/or shipped. Any further questions you may have about this turntable

should be directed to your dealer / distributor or directly to Clearaudio at:

clearaudio electronic GmbH

Spardorfer Str. 150

91054 Erlangen

Germany

Tel/Phone: +49 9131 40300100

Fax: +49 9131 40300119

www.clearaudio.de

www.analogshop.de

[email protected]



Pic. 10: Packing of the platter

Concept

User manual / Bedienungsanleitung

Page/ Seite 8 clearaudio electronic GmbH 2015

6. Technical data

Concept - Turntable:

Construction:

Resonance-optimized chassis

Speed ranges:

33 1/3 45 and 78 RPM

Drive unit (motor):

Decoupled DC motor with low noise bearings

Bearing:

Polished and tempered steel shaft in a sintered bronze

bush, runs on a mirror of Teflon

Platter:

POM, 30 mm thickness

Speed variation:

+- 0.04 %

Weight:

approx. 7.5 kg incl. motor, tonearm and cartridge

Dimensions:

(w x d x h)

mm approx. 420 mm x 350 mm x 125 mm (with tonearm)

inch approx: 16,.54 x 13.78 x 4.92 (with tonearm)

Power consumption:

Max. consumption:

Consumption in operation:

Off mode:

1.5 Watt

0,5 Watt

0 Watt

Warranty:

2 years

Tonearm:

Construction:

Friction free tonearm with magnetic bearing technology

Tonearm weight:

280 gram

415 gram (incl. counter weight)

Cartridge balance range:

2.5 gram –17 gram

Null points:

Inner: 66,00 mm

Outer: 120.9 mm

Audio lead:

Clearaudio

Directwire Plus 1.2 m from tonearm:

Cable-capacity: 156pF/m

Cable –induction: 0,52µH/m

Cable –resistance: 0,46Ω/m

Overhang:

17.31 mm

Overall length:

302 mm

Effective length:

9 inches (exact 239.31 mm)

Distance from pivot:

222 mm

Offset angle:

24.36°

Maximum offset angle according to the radius:

0.123 °/cm

Anti-skating factor at a radius of 62.9 mm and

126.9 mm:

0.43

Mounting style:

Linn / Clearaudio

Warranty:

2 years

Cartridge / Pick-up:

Frequency Response:

20Hz-20kHz

Output Voltage (1kHz, 5cm/s):

~ 3,3 mV

Channel Separation (1kHz):

> 20 dB

Channel Balance (1kHz):

< 2 dB

Tracking Ability:

80 µm

Tracking Force:

MM: 2.4 grams (+/- 0.2 grams)

MC: 2.2 grams (+/- 0.2 grams)

Coil Impedance (1kHz):

0,66 kOhm

Coil Inductance:

0,42 H

Load Resistance:

47 kOhm

Load Capacitance:

100 pF

Cantilever:

Aluminium coated

Weight:

8.4 gram

Warranty:

2 Years

* please fill out the warranty card and send it back to Clearaudio within 14 days.

Clearaudio electronic is not responsible for typographical errors in descriptions. Technical

specifications subject to change or improvement without prior notice. Availability as long as stock

lasts. Copies and imprints, including extracts, require written conformation from Clearaudio electronic

GmbH; Germany

Version: October 2015

Concept

User manual / Bedienungsanleitung

Page/ Seite 9 clearaudio electronic GmbH 2015

Sehr verehrte clearaudio –Kundin, sehr verehrter clearaudio –Kunde,

Mit dem clearaudio

concept

oder

concept wood

Plattenspieler beginnt der Aufbruch in eine

neue Ära im Plattenspielerbau.

Der

concept

Plattenspieler zeichnet sich durch hervorragende Verarbeitungsqualität Made in

Germany, fortschrittliche Technologien und Materialien sowie zeitlosem Design aus.

Der

concept

verfügt über einen innovativen Tonarm mit reibungsfreier Magnetlagerung.

Abgerundet wird dieses Komplettpaket durch einen hochwertigen clearaudio Moving Magnet

Tonabnehmer. Der

concept

ist werksseitig komplett eingestellt und spielbereit. Sogar die

Auflagekraft des Tonabnehmers und das Antiskating sind einjustiert.

Das originelle und zeitlos moderne Design garantiert Spielfreude für Jahrzehnte!

CONCEPT = Innovatives Konzept zum attraktivem Preis –Qualitäts- Verhältnis!

Um die volle Qualität des

concept

oder

concept wood

Laufwerkes nutzen zu können, lesen Sie

bitte diese Bedienungsanleitung aufmerksam durch. Alle Hinweise dienen dazu, Ihnen viele Jahre

Musikgenuss zu bereiten und Fehlbedienungen zu vermeiden.

Wir bedanken uns bei Ihnen für Ihr Vertrauen und wünschen Ihnen viel Freude mit Ihrem neuen

clearaudio

concept

Laufwerk.

clearaudio electronic GmbH

Lesen Sie diesen Abschnitt in jedem Fall, bevor Sie das Gerät an das Stromnetz anschließen.

CE-MARKIERUNG

Der clearaudio

concept

entspricht den Bestimmungen über elektromagnetische Störfreiheit

(EMC) und denen über Niederspannungsgeräte.

GERÄTENETZEINSTELLUNG

Ihr clearaudio-Produkt wurde so konstruiert, dass es der Haushaltsleistung und den

Sicherheitsbestimmungen in Ihrer Region genügt.

INPUT: 100 V –240 V ~/ 50 –60 Hz / 150 mA; OUTPUT: 12 V= / 450 mA

URHEBERRECHT

Aufnahme und Wiedergabe jeglichen Tonmaterials kann die Zustimmung des Urhebers

erfordern. Beachten Sie dazu folgende Informationsschriften.

- Copyright Act 1956 (Urheberrechtsgesetz 1956)

- Dramatic and Musical Performers Act 1958 (Gesetz über dramatische und musikalische

Aufführungsrechte, 1958)

- Performers Protection Acts 1963 and 1972 (Künstlerschutzgesetze von 1963 und 1972)

- Sämtliche nachfolgende gesetzliche Verfügungen und Bestimmungen.

Autres manuels pour Concept

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Clearaudio Platine

Clearaudio

Clearaudio Performance DC Manuel utilisateur

Clearaudio

Clearaudio Universal Manuel utilisateur

Clearaudio

Clearaudio Moving Coil V2 Manuel utilisateur

Clearaudio

Clearaudio Emotion SE Manuel utilisateur

Clearaudio

Clearaudio Master Innovation Manuel utilisateur

Clearaudio

Clearaudio Charisma V2.1 MM Manuel utilisateur

Clearaudio

Clearaudio Jubilee MM Manuel utilisateur

Clearaudio

Clearaudio Emotion SE Manuel utilisateur

Clearaudio

Clearaudio Emotion SE Manuel utilisateur

Clearaudio

Clearaudio Smart matrix professional Manuel utilisateur

Clearaudio

Clearaudio double matrix professional SONIC Manuel utilisateur

Clearaudio

Clearaudio Statement V2 Manuel utilisateur

Clearaudio

Clearaudio Ovation Manuel utilisateur

Clearaudio

Clearaudio TT2 Manuel utilisateur

Clearaudio

Clearaudio Master Innovation Manuel utilisateur

Clearaudio

Clearaudio Innovation Compact Manuel utilisateur

Clearaudio

Clearaudio Unify Series Manuel utilisateur

Clearaudio

Clearaudio Master-TQ-I Manuel utilisateur

Clearaudio

Clearaudio Smart Matrix Manuel utilisateur

Clearaudio

Clearaudio Master Innovation Series Manuel utilisateur

Clearaudio

Clearaudio Reference Jubilee Manuel utilisateur

Clearaudio

Clearaudio Smart matrix professional Manuel utilisateur

Clearaudio

Clearaudio Unify Manuel utilisateur

Clearaudio

Clearaudio Ovation Manuel utilisateur

Manuels Platine populaires d'autres marques

Gemini

Gemini CDT-05 MKII Manuel utilisateur

Rotel

Rotel RP-820 Manuel utilisateur

Shuman

Shuman MC-250BT Manuel utilisateur

Stanton

Stanton STR8-150 Manuel utilisateur

Audio Technica

Audio Technica AT-LPW40WN Manuel utilisateur

Crosley

Crosley McQueen CR7011-GY Manuel utilisateur

Reloop

Reloop SMP-1 Manuel utilisateur

auna

auna TT-Classic Plus Manuel utilisateur

COMO AUDIO

COMO AUDIO Turntable Analog Manuel utilisateur

Dual

Dual 1009 F Manuel utilisateur

REED

REED Muse3C Manuel utilisateur

AXIOMTEK

AXIOMTEK OPS883-H Series Manuel utilisateur

Pioneer

Pioneer PL-71 Manuel utilisateur

Vestax

Vestax PDX-a1 Manuel utilisateur

Denon

Denon DP-400 Manuel utilisateur

Dual

Dual 504 Manuel utilisateur

Audio-Techica

Audio-Techica AT-LP60XBT Manuel utilisateur

Goldring

Goldring G99 Manuel utilisateur